REE/trace element characteristics of sandstone-type uranium deposits in the Ordos Basin

1 Introduction The Ordos Basin is the second largest sedimentary basin in China. During the last 10 years, a great progress has been achieved in the aspects of tectonic evolution, dynamics process, inner and outer geological processes during Mesozoic-Cen…     

裂缝性岩石裂缝扩展的光弹构造物理模拟——以南华北盆地户部寨沙河阶组为例

以南华北盆地户部寨第三系沙河阶组粉砂岩低渗透储层为例,总结了其中发育的5种类型构造裂缝组合,即:①南北向雁形张节理组成的共轭剪节理带;②东西向雁形张节理组成的共轭剪节理带;③缠结状多组剪切构造裂缝;④组合状交切的多组剪切构造裂缝及张裂缝;⑤散状无序排列的构造裂缝。在此基础上,建立光弹性试验构造物理模型,沿现应力场96°方向,均匀地对该模型逐步增加外载力。结果表明,沿各组合裂缝尖端分别形成对称于裂缝走向、且主轴垂直于裂缝的Ⅰ型等色线条纹;对称于裂缝走向、且主轴平行于裂缝走向的Ⅱ型条纹和斜交于裂缝走向的复合型(Ⅲ型)条纹。第①类组合裂缝尖端以Ⅰ型等色线条纹的拉张应力和张剪应力为主;第②类组合裂缝尖端以复合型(Ⅲ型)等色线条纹的挤压应力为主;第③、④和⑤类组合裂缝尖端的应力分布较为复杂。当模型外载荷接近1000kg时,裂缝尖端起裂,并开始发育显微裂缝,而当外载荷达1100-1200 kg时,沿裂缝尖端部位形成宏观裂缝,并开始扩展。5种类型的裂缝组合扩展发育程度由强至弱依次为:①,③,⑤,②,④。其中第①类共轭裂缝组合起裂最早,扩展最快,裂缝间的连通趋势最好,说明规则分布的构造裂缝组合,在垂直于外施加载衙时更易达到连通的目的。     

山西沁水盆地煤层气成藏的微观动力能条件研究

煤层气成藏的微观动力能条件主要包括煤储层的孔隙—裂隙系统、煤储层的生气作用和储气作用两个方面。以山西沁水盆地为例,深入剖析了煤储层的孔隙—裂隙系统及其发育历程、煤储层的生气作用与能量聚散,阐明了煤层气成藏的微观动力能对成藏效应的控制作用。结果表明:构造作用对储层渗透率具有明显的控制作用,成烃增压致使能量聚集,成为盖层突破作用的主要驱动力,而能量放散则主要是通过煤储层孔隙—裂隙系统的产生、发展。根据上述研究成果,沁水盆地煤层气成藏的地质区划结果为:盆地南部的有利区带为阳城和晋城的北部地区,包括潘庄、樊庄、郑庄等地区;盆地中部的有利区带为安泽—沁源地区,位于盆地西斜坡的中南部;盆地北部的可能有利区带为寿阳东南部地区,位于榆次东北部和阳泉西南部之间。     

沁水盆地煤层气钻井工艺方法

针对沁水盆地煤层气概况,地层情况及开采条件,介绍了参数井、生产井、多分支地面煤层气水平开发井、丛式井等钻井工艺、钻具组合、井身结构及井身质量要求.     

胶莱盆地含金建造地球化学特征

胶莱盆地蓬家夼金矿床及宋家沟金矿床均赋存于下白垩统莱阳群一段含金建造中,该含金建造由砾岩、含砾砂岩、碳质泥岩及碳酸盐岩等组成,Au100.2～241.0ng/g,Ag1.50～3.73μg/g,Zn560～1021μg/g,Pb356～364μg/g,Cu60～394μg/g,As11.0～25.4μg/g,同时富硫及有机碳。含金建造K-Rb、K-Ba呈正相关,K-Sr、K-Ca不相关,Sr/Ba<1,B、V关系均显示了陆相淡水沉积特征。La/Y-REE组成显示了沉积特征。围岩、矿石及矿石中黄铁矿及磁铁矿的稀土元素分布模式相似,该含金建造是矿源层也是容矿层,是区内重要的成矿地质条件及找矿标志。     

鄂尔多斯盆地上古生界高分辨率层序地层分析

按基准面旋回原理，将鄂尔多斯盆地上古生界本溪组（C2b)、太原组（P1t）、山西组(P1s)和下石盒子组（P1xs)划分为3个超长期、8个长期、19个中期和62个短期旋回层序：较为详细地介绍了各级别层序的结构类型、叠加样式和沉积演化序列；建立以长期旋回层序为年代地层框架，中期旋回层序为等时地层对比单元的层序的地层格架；并讨论高分辨率层序地层与天然气藏的关系。     

The Vigny limestones: a record of Palaeocene (Danian) tectonic-sedimentary events in the Paris Basin

Danian marine sedimentation in the Paris Basin occurred between two major erosional phases. The earlier was responsible for the stripping of presumably deposited Maastrichtian sediments and of a variable thickness of Campanian chalk. The later occurred during the late Palaeocene and resulted in the erosion of almost all Danian deposits, which are now limited to small and scattered outcrops. One of these outcrops corresponds to reefal and peri‐reefal limestones of middle to late Danian age, exposed in the quarries of Vigny (NW of Paris). Danian deposits here show intricate relations with the surrounding Campanian chalk. Danian sedimentation was contemporaneous with faulting, which generated signifiant sea‐floor relief and resulted in contrasting depositional areas: topographic highs with coralgal reefs, and depressions where calcirudite channel fill accumulated. Normal faulting occurred along WNW–ESE master faults. The generation of submarine fault scarps gave rise to various types of gravity‐driven phenomena, including the sliding and slumping of large blocks of reefal limestone and the deposition of carbonate debris flows. Along with the redeposition of the Danian carbonates, flows of fluidized and reworked Campanian chalk resulted from the peculiar physical properties of the undercompacted chalks. Erosion and faulting occurred predominantly during the Palaeocene and represent a major episode in the physiographic evolution of the Paris Basin.     

Structure and tectonic evolution of the Southern Eurasia Basin, Arctic Ocean

Multichannel seismic reflection data acquired by Marine Arctic Geological Expedition (MAGE) of Murmansk, Russia in 1990 provide the first view of the geological structure of the Arctic region between 77–80°N and 115–133°E, where the Eurasia Basin of the Arctic Ocean adjoins the passive-transform continental margin of the Laptev Sea. South of 80°N, the oceanic basement of the Eurasia Basin and continental basement of the Laptev Sea outer margin are covered by 1.5 to 8 km of sediments. Two structural sequences are distinguished in the sedimentary cover within the Laptev Sea outer margin and at the continent/ocean crust transition: the lower rift sequence, including mostly Upper Cretaceous to Lower Paleocene deposits, and the upper post-rift sequence, consisting of Cenozoic sediments. In the adjoining Eurasia Basin of the Arctic Ocean, the Cenozoic post-rift sequence consists of a few sedimentary successions deposited by several submarine fans. Based on the multichannel seismic reflection data, the structural pattern was determined and an isopach map of the sedimentary cover and tectonic zoning map were constructed. A location of the continent/ocean crust transition is tentatively defined. A buried continuation of the mid-ocean Gakkel Ridge is also detected. This study suggests that south of 78.5°N there was the cessation in the tectonic activity of the Gakkel Ridge Rift from 33–30 until 3–1 Ma and there was no sea-floor spreading in the southernmost part of the Eurasia Basin during the last 30–33 m.y. South of 78.5°N all oceanic crust of the Eurasia Basin near the continental margin of the Laptev Sea was formed from 56 to 33–30 Ma.     

Aptian to Coniacian (Early–Late Cretaceous) palynostratigraphy of the Gustav Group, James Ross Basin, Antarctica

The Gustav Group of the James Ross Basin, Antarctic Peninsula, forms part of a major Southern Hemisphere Cretaceous reference section. Palynological data, chiefly from dinoflagellate cysts, integrated with macrofaunal evidence and strontium isotope stratigraphy, indicate that the Gustav Group, which is approximately 2.6 km thick, is Aptian–Coniacian in age. Aptian–Coniacian palynofloras in the James Ross Basin closely resemble coeval associations from Australia and New Zealand, and Australian palynological zonation schemes are applicable to the Gustav Group. The lowermost units, the coeval Pedersen and Lagrelius Point formations, have both yielded early Aptian dinoflagellate cysts. Because the overlying Kotick Point Formation is of early to mid Albian age, the Aptian/Albian boundary is placed, questionably, at the Lagrelius Point Formation–Kotick Point Formation boundary on James Ross Island, and this transition may be unconformable. Although the Kotick Point Formation is largely early Albian on dinoflagellate cyst evidence, the uppermost part of the formation appears to be of mid Albian age. This differentiation of the early and mid Albian has refined the age of the formation, previously considered to be Aptian–Albian, based on macrofaunal evidence. The Whisky Bay Formation is of late Albian to latest Turonian age on dinoflagellate cyst evidence and this supports the macrofaunal ages. Late Albian palynofloras have been recorded from the Gin Cove, lower Tumbledown Cliffs, Bibby Point and the lower–middle Lewis Hill members. However, the Cenomanian age of the upper Tumbledown Cliffs and Rum Cove members, based on molluscan evidence, is not supported by the dinoflagellate cyst floras and further work is required on this succession. The uppermost part of the Whisky Bay Formation in north-west James Ross Island is of mid to late Turonian age and this is confirmed by strontium isotope stratigraphy. The uppermost unit, the Hidden Lake Formation, is Coniacian in age on both palaeontological and strontium isotope evidence. The uppermost part of the formation appears to be early Santonian based on dinoflagellate cysts, but strontium isotope stratigraphy constrains this as being no younger than late Coniacian. This refined palynostratigraphy greatly improves the potential of the James Ross Basin as a major Cretaceous Southern Hemisphere reference section.     

Post-mid-Cretaceous eastern North Sea evolution inferred from 3D thermo-mechanical modelling

The Late Cretaceous–Cenozoic evolution of the eastern North Sea region is investigated by 3D thermo-mechanical modelling. The model quantifies the integrated effects on basin evolution of large-scale lithospheric processes, rheology, strength heterogeneities, tectonics, eustasy, sedimentation and erosion.

The evolution of the area is influenced by a number of factors: (1) thermal subsidence centred in the central North Sea providing accommodation space for thick sediment deposits; (2) 250-m eustatic fall from the Late Cretaceous to present, which causes exhumation of the North Sea Basin margins; (3) varying sediment supply; (4) isostatic adjustments following erosion and sedimentation; (5) Late Cretaceous–early Cenozoic Alpine compressional phases causing tectonic inversion of the Sorgenfrei–Tornquist Zone (STZ) and other weak zones.

The stress field and the lateral variations in lithospheric strength control lithospheric deformation under compression. The lithosphere is relatively weak in areas where Moho is deep and the upper mantle warm and weak. In these areas the lithosphere is thickened during compression producing surface uplift and erosion (e.g., at the Ringkøbing–Fyn High and in the southern part of Sweden). Observed late Cretaceous–early Cenozoic shallow water depths at the Ringkøbing–Fyn High as well as Cenozoic surface uplift in southern Sweden (the South Swedish Dome (SSD)) are explained by this mechanism.

The STZ is a prominent crustal structural weakness zone. Under compression, this zone is inverted and its surface uplifted and eroded. Contemporaneously, marginal depositional troughs develop. Post-compressional relaxation causes a regional uplift of this zone.

The model predicts sediment distributions and paleo-water depths in accordance with observations. Sediment truncation and exhumation at the North Sea Basin margins are explained by fall in global sea level, isostatic adjustments to exhumation, and uplift of the inverted STZ. This underlines the importance of the mechanisms dealt with in this paper for the evolution of intra-cratonic sedimentary basins.