智能交通系统中的公交车辆指挥调度体系结构

该文阐述公交智能指挥调度系统总体框架，结合智能交通系统ITS(Intelligent Transport Systems)对公交智能化调度的逻辑结构和物理结构要求，分析公交车辆智能化调度系统结构体系及其模型化，探讨智能调度策略和调度机理。根据该系统总体设计框架构思，了解系统各功能间的相互关系，优化公交车辆运营管理模式，以改善现有公交系统的管理水平以及运营效率，为公交指挥调度系统的完善、提高提供可靠技术基础。     

用废聚苯乙烯泡沫制备胶粘剂

本文研究了回收废旧聚苯乙烯(PS)泡沫塑料制备PS胶粘剂的方法。以废旧聚苯乙烯泡沫塑料为主要原料,选择低毒性、相溶性好的有机溶剂,使其溶解,再与聚乙烯醇(PVA)水溶液共混,制得水包油乳液。加入不同改性材料,制得改性胶粘剂。     

黔西南地甲病重病区与环境地球化学关系研究

贵州是我国碘缺乏病严重地区之一，特别是黔西南地区。本根据含碘量的调查，编制了贵州露头地层、地表土壤和地表水中含碘量分布图，并与地甲病患病率分布图进行对比研究。研究表明，地甲病患病率与露头地层中碘含量关系不明显，地表土壤中碘含量与地甲病患病率有一定关系，而地表水中碘含量与地甲病患病率关系较为密切，地表水中含碘量高的地区，地甲病患病率就低，反之则地甲病患病率高。     

高陡土坡喷锚（土钉墙）支护施工技术

通过长沙电力学院西区永久性锚拉挡墙施工实例，介绍喷锚(土钉墙)的施工方法，质量控制关键点等施工技术．     

TRMM PR雷达与阜阳雷达降水资料的对比研究

选取了1998年与1999年HUBEX观测资料，将TRMM卫星上的星载降雨雷达PR与阜阳的713数字化天气雷达资料在以下3个方面做了比较：(1)强度场的分布；(2)平均反射率廓线；(3)灵敏度。分析、比较结果可知阜阳雷达在探测灵敏度和水平方向的分辨率要高于PR，但由于波束宽度、衰减和资料转化过程计算误差的原因，其远距离处的观测值与真实值有一定偏差。PR波长短，对衰减敏感，尤其是在垂直方向上经过强衰减后，订正值仍偏小。但由于探测方式的不同PR在水平方向上不存在衰减的问题，且其资料分布均匀，因此提出一种用PR资料来订正地基雷达资料的方法用以提高地基雷达探测的精确度。     

Flood Damage Reduction Program (FDRP) in Québec: Case Study of the Chaudiére River

This study presents the evolution of agreements between the governments of Canadaand Québec on flood damage reduction. In Québec, the implementation of a regulation about building in floodplains came about in 1983–1984. Today, this regulation takes the form of a policy called ``Policy of shores, littoral and floodplain protection'. Municipalities must adopt rules that concur with the principles of this policy.The Chaudiére River basin was selected for analysis of urban developmentduring the period following the application of building rules in flood-risk areas.Despite the ban on building in the strong current zone (0–20 year return periodflood zone), many buildings, essentially residential, have been erected in thiszone. These new constructions generally account for a low percentage of thetotal property value in the 0–100 year flooding area, but are legal since theyare connected to a water and sewage network that existed prior to the officialfloodplain regulation.Flood damage along the Chaudiére River will tend to increase for two reasons.Firstly, while respecting the policy mentioned above, sites are still available infloodplains for future development. Secondly, no structural flood protection workshave been erected in view of the fact they are only marginally profitable from anbenefit-cost point of view.     

The anisotropy of magnetic susceptibility in biotite, muscovite and chlorite single crystals

The anisotropy of magnetic susceptibility (AMS) of single crystals of biotite, muscovite and chlorite has been measured in order to provide accurate values of the magnetic anisotropy properties for these common rock-forming minerals. The low-field AMS and the high-field paramagnetic susceptibility are defined. For the high-field values, it is necessary to combine the paramagnetic deviatoric tensor obtained from the high-field torque magnetometer with the paramagnetic bulk susceptibility measured from magnetization curves of the crystals. This leads to the full paramagnetic susceptibility ellipsoid due to the anisotropic distribution of iron cations in the silicate lattice. The ellipsoid of paramagnetic susceptibility, which was obtained for the three phyllosilicates, is highly oblate in shape and the minimum susceptibility direction is subparallel to the crystallographic c-axes. The anisotropy of the susceptibility within the basal plane of the biotite has been evaluated and found to be isotropic within the accuracy of the instrumental measurements. The degree of anisotropy of biotite and chlorite is compatible with previously reported values while for muscovite the smaller than previously published values. The shape of the chlorite AMS ellipsoid for all the samples is near-perfect oblate in contrast with a wide distribution of oblate and prolate values reported in earlier studies. Reliable values are important for deriving models of the magnetic anisotropy where it reflects mineral fabrics and deformation of rocks.     

Researches on Cartographic Database-Based Interactive Three-Dimensional Topographic Map

With the development of computer graphics, the three-dimensional (3D) visualization brings new technological revolution to the traditional cartography. Therefore, the topographic 3D-map emerges to adapt to this technological revolution, and the applications of topographic 3D-map are spread rapidly to other relevant fields due to its incomparable advantage. The researches on digital map and the construction of map database offer strong technical support and abundant data source for this new technology, so the research and development of topographic 3D-map will receive greater concern. The basic data of the topographic 3D-map are rooted mainly in digital map and its basic model is derived from digital elevation model (DEM) and 3D-models of other DEM-based geographic features. In view of the potential enormous data and the complexity of geographic features, the dynamic representation of geographic information becomes the focus of the research of topographic 3D-map and also the prerequisite condition of 3D query and analysis. In addition to the equipment of hardware that are restraining, to a certain extent, the 3D representation, the data organization structure of geographic information will be the core problem of research on 3D-map. Level of detail (LOD). space partitioning, dynamic object loading (DOL) and object culling are core technologies of the dynamic 3D representation. The objectselection, attribute-query and model-editing are important functions and interaction tools for users with 3D-maps provided by topographic 3D-map system, all of which are based on the data structure of the 3D-model. This paper discusses the basic theories, concepts and cardinal principles of topographic 3I)-map,expounds the basic way to organize the scene hierarchy of topographic 3D-map based on the node mechanism and studies the dynamic representation technologies of topographic 3D-map based on LOD, space partitioning, DOL and object culling. Moreover. such interactive operation functions are explored, in this paper, as spatial query, scene editing and management of topographic 3D-map. Finally, this paper describes briefly the applications of topographic 3D-map in its related fields.     

A Technique for Direct Retrieval of Surface Specific Humidity Over Open Oceans from Irs-P4/Msmr Satellite Data

The Multi frequency Scanning Microwave Radiometer (MSMR) onboard Oceasat-1 was used to develop a retrieval method fornear-surface specific humidity by means of multivariate regressiontechnique. The MSMR measures the microwaveradiances in 8 channels at the frequencies of 6.6, 10.7, 18 and 21 GHzfor both vertical and horizontal polarizations. Regression coefficients were derived using the ship reports of the Comprehensive Ocean-Atmosphere Data Set (COADS) for the months of July, October and December, in 1999. Daily near-surface specific humidity data from COADS in 2° × 2° latitude/longitude bins and collocated brightness temperature data from MSMR were used to derive the coefficients. The derived coefficients werevalidated with humidity given in COADS.A linear relationship is established to determine the near-surface specifichumidity from MSMR brightness temperature (Tb) with an rms error of 1.2 g kg^-1 for individual situations and an rms errorof 0.84 g kg^-1 for monthly time scales over global oceans.The retrieval algorithm is validonly for the open sea regions.     

瑞雷面波在防渗墙无损检测中的应用

瑞雷面波均匀介质理论和弹性层状介质中的频散理论都是在半无限弹性空间基础上进行的，本文通过理论分析将瑞雷面波引申在水平方向宽度有限的墙状介质中应用，结合室内实验和防渗墙施工问题，得出一套完整的无损检测技术，用以控制防渗墙施工质量。