Identifying China’s leading world city: a network approach

This paper reports our research on China’s world cities. Formal network analysis of air passenger linkages for recent years among China’s most populous cities and among many of the world’s largest cities allows us to identify the country’s leading world city from among the leading Mainland candidates, Beijing, Shanghai and Guangzhou. We theorize our findings about China’s world cities in relation to both global forces (and China’s increasing entanglement with them) and the policies and actions of the national state. We examine the national and global urban network through a longitudinal, two-level analysis of airline passenger travel for four time points between about 1990 and 2005. We show that Beijing was China’s leading world city at the beginning of the time period, a status it lost nationally in as early as 1995, and then globally 10 years later. On the other hand Shanghai became China’s leading world city, and it acquired this status first nationally in 2000, and then globally in 2005. The changing status of the Chinese capital corresponds to the country’s increasing involvement with the capitalist world economy. Shanghai’s ascendance as the leading world city in China may indicate that global forces have come to play an increasingly important role relative to that of the developmental state.

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran     

深井旋转轴套流场的CFD模拟

旋转轴套在超深井工作时,其井下流动是三维湍流流动,旋转轴套的旋转和表面曲率效应以及随之而来的哥氏力和离心力,使流场在超深井的流动中极其复杂,同时,由于流体介质泥浆属于液固两相流,更致使内部流场测试困难,而且超深井中的工况在使用常规方法已很难得到较准确的数据。为此,将计算流体力学软件Fluent应用于超深井下流场的模拟,基于Navier-Stokes方程和Reynolds应力方程模型,建立多种仿真模型,在相同条件下,使用CFD仿真软件Fluent模拟仿真的不同结果,优化与旋转轴套叶片设计相关的几何参数,提高     

深水沉积层序特点及构成要素

本文在回顾当前国际上深水沉积研究热点的基础上,结合在墨西哥湾深水研究的成果系统描述了深水沉积的定义、形成机理、深水沉积层序及深水沉积构成要素的特点.深水沉积主要是在重力流作用下深水环境的沉积,主要形成于相对水平面下降和早期上升的时期,主要分布在低位体系域中.深水层序以凝缩段为边界,块状搬运沉积最早形成并直接位于层序界面上,其上被河道-天然堤沉积所覆盖.典型深水沉积的要素主要由河道、天然堤及越岸沉积、板状砂、块状搬运沉积等构成,这些沉积要素时空上有序地分布.深水河道是物源的主要通道和沉积的重要场所,从上游至下游河道弯曲度增加,能量逐渐减弱.侧向迁移明显,垂向上由富砂的顺直河道演化为相对富泥的弯曲河道.天然堤及越岸沉积以泥质为主,天然堤沿河道呈楔状分布,其近端砂岩含量高,地层厚且倾角较陡;远端砂岩含量低,地层薄且平缓,侧向连续性好但垂向连续性差.板状砂主要为深水扇前缘非限制性沉积,可分为块型和层型.块型侧向连续性好,同时垂向连通性高.层型侧向连续性好,垂向连通性差.块状搬运沉积主要是低水位期坡上沉积物失稳形成的各类滑塌体及碎屑流,其对下伏地层侵蚀明显,分布广泛,变形构造常见,可作为油气良好的封盖层.     

川西前陆盆地中—新生代沉积迁移与构造转换

川西前陆盆地中—新生代各构造层的残余厚度展布和沉积特征分析发现,四川克拉通周缘的前陆盆地在晚三叠世时期发育于龙门山山前,明显属于龙门山褶皱逆冲构造载荷所形成的前渊凹陷;侏罗纪早期的沉积地层呈面状分布,没有表现出显著的挠曲沉降,指示了一个构造相对平静的阶段;中侏罗世早期前渊凹陷迁移至龙门山北段和米仓山山前,前渊沉积从晚三叠世的北东向转换为近东西向,广泛的湖泊相沉积预示了前陆盆地的欠充填状态;中侏罗世中晚期,川西盆地沉降中心又迁移到大巴山山前,相应的挠曲变形又从近东西向转化为北西向,构成了大巴山的前渊凹陷;晚侏罗世—早白垩世时期,沉降中心再次回到米仓山山前,巨厚的前渊凹陷沉积指示了米仓山冲断带的主要活动时期;白垩纪末—古近纪的前渊凹陷则跃迁至雅安—名山地区。川西前陆盆地的同造山沉降中心以四川盆地中心为核心在西部和北部呈弧形迁移,沉积序列不断更替和叠加。中生界各构造层底界构造图显示现今的构造低部位位于川西北地区和川西南地区,在川西北地区均有东西走向的等值线分布,而川西南地区等值线走向则为北东-南西向。因此分析认为,晚侏罗世至早白垩世的构造变形可能控制了川西盆地现今的地层变形,形成了川西北地区的南北向构造挤压结构,而晚期的新生代构造变形则主要体现在川西盆地的西南部,形成北东-南西向的地层展布特征。     

Numerical Experiment on Two-Dimensional Line Thermal

The time evolution of a two-dimensional line thermal-a turbulent flow produced by an initial element with signifi-cant buoyancy released in a large water body, is numerically studied with the two-equation k - e model for turbulence closure. The numerical results show that the thermal is characterized by a vortex pair flow and a kidney shaped concentra-tion structure with double peak maxima; the computed flow details and scalar mixing characteristics can be described by self-similar relations beyond a dimensionless time around 10. There are two regions in the flow field of a line thermal: a mixing region where the concentration of tracer fluid is high and the flow is turbulent and rotational with a pair of vortex eyes, and an ambient region where the concentration is zero and the flow is potential and well-described by a model of doublet with strength very close to those given by early experimental and analytical studies. The added virtual mass coeffi-cient of the thermal motion is found to be approximat     

Predictability of Interannual Variability in the Kuroshio Transport South of Japan Based on Wind Stress Data over the North Pacific

It is expected that a roughly two-year forecast of the Kuroshio transport variation can be made from a past record of wind stress data over the ocean, since it takes nearly ten years for the first-mode baroclinic Rossby wave to traverse the entire basin in the midlatitude North Pacific (∼30°N). We therefore investigated the predictability using an ocean general circulation model driven by the wind stress data from the National Centers for Environmental Prediction/National Center for Atmospheric Research (NCEP/NCAR) reanalysis. Referring to a hindcast experiment as the control run, we carried out fifteen forecast experiments, the initial conditions of which are taken from the hindcast experiment at intervals of two years during the period from the end of 1969 to the end of 1997. Each of the forecast experiments is driven only by wind stress in the year preceding each experiment. The forecasted Kuroshio transport anomaly south of Japan agrees better with the hindcasted one during the first two years of the forecast in most cases. In some cases, however, significant disagreements occur, most of which are likely due to larger unpredictable variations caused by wind stress anomalies near Japan. At the end of forecast year 2, the anomaly correlation coefficient is about 0.7, and rms of the forecast error is smaller than rms of the hindcasted anomaly. These results indicate that the prediction of the interannual variability in the Kuroshio transport could be made two years in advance at a statistically significant level. This revised version was published online in July 2006 with corrections to the Cover Date.     

南海温跃层基本特征及一维预报模式

根据现有1907—1990年南海大面调查资料,按1°×1°网格进行逐月的标准水层的温度统计。在此基础上采用3次样条函数的插值方法计算出整个南海温跃层的深度、厚度和强度并予以相应分析。分析表明,南海温跃层主要分为两种类型:第一类为辐射型,主要分布在南海北部的陆架区内,季节变化显著;第二类为不同水体叠置型,主要分布在广大深水区,它长年存在,季节变化较小。一种温跃层的一维积分预报模式,该模式是基于忽略热平流作用和水平热扩散的前提下,从局部热平衡方程出发,建立了受海面热收支及风混合作用下求解温度垂直分布及温跃层的时空变化。在南海北部水深约300m处进行了单站温跃层后报,结果表明,温跃层的深度、厚度和强度的相对误差均在30％以下。     

海洋湍流的测量及相关分析

对海洋湍流速度脉动的一维概率密度作了测量，并把测量结果与高 斯分布进行了比较。比较的结果表明，一个接近于高斯分布而另一个却差别较 大。计算到直至五阶湍流相关函数并与网格湍流进行了比较，结果都表明小时 间间隔中测量结果与网格湍流的结果近似一致，而大时间间隔中却相差很大。 以上结论说明了较长的测量时间的必要性。     

低风速下海面附近气温场对海气动量通量的影响

实用测的海上和层平均风剖面数据和温度剖面数据，通过数据回归和迭代方法计算出了在不同大气稳定情况下的海面阻力系数。得到了与前人理论计算一致的结论：海面阻力系数随海面大气稳定度的增加而减小，另外，我们还发现：在海面风速小于１３ｍ／ｓ时，不能认为气温剖面外推到海面的值与海面水温的是一致的。这样若用海气温差作为衡量海面上方大气的稳定程度，难于得到上面给出了理结论。这一点同前人的理论计算结果是不相同的。