On the conception ‘Fair weather condition’ in atmospheric electricity

Measurements of atmospheric electrical and meteorological parameters during different meteorological conditions indicate that the use of the conception Fair weather condition in atmospheric electricity is discussable. Fair weather contains a very broad stability range, from very unstable to strong stable stability of the atmosphere. For turbulent fluctuations of the electric parameters (the most local variations) the variations are determined by the micrometeorological processes for all stability conditions.These fluctuations represent frequencies greater than one period per four minutes. For lower frequencies (less local variations), however, the stability dependency increases. During stable conditions the electric field and vertical current density were nearly wholly influenced by the charges and their transfer in the nearest layer. During near-neutral and unstable conditions the electrical parameters were influenced by more separated sources. Measurements of how well Ohm's law was fulfilled also indicate the difficulties by using the conception fair weather. The measurements also indicate the importance of taking the convection current density into consideration in studies of the electric charge transfer in the atmosphere.In the more large scale of variations measurements of the electric field by radiosoundings show that 88% of the ionospheric potential is derived from the troposphere, where the meteorological processes are of fundamental character for the atmospheric electrical phenomena. The relatively great stability of the diurnal variation of the large scale or global electric field is also valid for the meteorological processes in this scale of variations.     

The characteristics of rain electricity in Nigeria. I — Magnitudes and variations

The characteristics of rain and point charges based on routine measurements extending over four rainy seasons are presented. An average rain current density of (1.0±0.1)×10^–10 A m^–2 and charge per unit volume of rain water of (0.43±0.02)×10^–4 C m^–3 for the locality are obtained, which are compared with data obtained elsewhere by other workers. The point-discharge current measurements lead to a revised estimate of (0.86±0.08)×10^–9 A m^–2 for the average point discharge current below storm clouds.     

Equations of kinetic and available potential energy evolution in wave-number frequency space

The equations of kinetic and available potential energy for the analysis of the growth and decay of atmospheric waves in wave-number-frequency space are derived. The effects of linear and nonlinear interactions of waves in the velocity and temperature fields, the conversions between the available potential and kinetic energies, and the Reynolds and molecular stresses on wave growth and decay are discussed.     

A spectrum of the acoustic-gravity waves associated with Auroral electro-jet

This model concerns the analysis of Aurora initiated travelling pressure waves in an isothermal atmosphere. Electro-dynamic Lorentz Force associated with auroral electric current density during the periods of geomagnetic activity is invoked as a possible exciting source.The dispersion phenomena in auroral induced acoustic gravity modes in the earth's atmosphere are examined and various cut-off frequencies analysed.Finally, an attempt is made to obtain a far field representation of the forced oscillations by means of Green's Function technique. Therefrom, the spectral amplitudes of the ground-level oscillations are computed. Incorporating various scaling factors, it is deduced that these amplitude components are in reasonable agreement with the results of recent measurements.     

FT-IR measurements of cold C3H8 cross sections at 7–15 μm for Titan atmosphere

We present absorption cross sections of propane (C₃H₈) at temperatures from 145 K to 297 K in the 690–1550 cm⁻¹ region. Pure and N₂-broadened spectra were measured at pressures from 3 Torr to 742 Torr using a Bruker IFS125 FT-IR spectrometer at JPL. The gas absorption cell, developed at Connecticut College, was cooled by a closed-cycle helium refrigerator. The cross sections were measured and compiled for individual spectra recorded at various experimental conditions covering the planetary atmosphere and Titan. In addition to the cross sections, a propane pseudoline list with a frequency grid of 0.005 cm⁻¹, was fitted to the 34 laboratory spectra. Line intensities and lower state energies were retrieved for each line, assuming a constant width. Validation tests showed that the pseudoline list reproduces discrete absorption features and continuum, the latter contributed by numerous weak and hot band features, in most of the observed spectra within 3%. Based on the pseudoline list, the total intensity in the 690–1550 cm⁻¹ region was determined to be 52.93 (±3%) × 10⁻¹⁹ cm⁻¹/(molecule cm⁻²) at 296 K; this value is within 3% of the average from four earlier studies. Finally, the merit of the pseudoline approach is addressed for heavy polyatomic molecules in support of spectroscopic observation of atmospheres of Titan and other planets. The cold cross sections will be submitted to the HITRAN database (hitran.harvard.edu), and the list of C₃H₈ pseudolines will be available from a MK-IV website of JPL (http://mark4sun.jpl.nasa.gov/data/spec/Pseudo).     

Parameterisation of the Planetary Boundary Layer for Diagnostic Wind Models

The planetary boundary-layer (PBL) parameterization is a key issue for the definition of initial wind flow fields in diagnostic models. However, PBL theories usually treat separately stable, neutral, and convective stability conditions, so that their implementation in diagnostic wind models is not straightforward. In the present paper, an attempt is made to adopt a comprehensive PBL parameterisation, covering stable/neutral and unstable atmospheric conditions, which appears suitable to diagnostic models. This parameterisation is implemented into our diagnostic mass-consistent code. A validation of the consistency between the implemented PBL parameterisations has been checked through an analysis of the sensitivity of the vertical wind profiles to atmospheric stability.     

紫外线模式预报方法的研究和试验

文章介绍了在T106全球谱模式中应用大气辐射传输模式预报紫外线辐射(UVR)的方法,给出了试验运行的结果.UVR强度的划分考虑了到达地表的UVR通量.参考国内、外紫外线(UV)预报服务的经验,制定了5个日光暴露的级别、相应的紫外线指数(UVI)及防护措施.1999年9月起,国家气象中心已在NOTES网上每月不定期地展示UVR预报的一些结果,2000年9月起,在Cray-C92业务操作系统上实施了连续的试验运行.     

遥测地表温度与比辐射率的迭代反演方法──理论推导与数值模拟

首先在地表比辐射率为已知的条件下,提出一个非线性迭代温度反演模型,我们对不同的地表和大气条件进行了模拟计算,结果表明当大气温度廓线误差－２Ｋ－２Ｋ,水汽廓线误差±２０％时的温度均方根误差为０．４８Ｋ。当大气模式误差一个模式时反演的温度均方根误差为０．８５Ｋ。在此基础上,引人相邻像元的概念,相邻像元的大气状况可以认为是相同的,应用两个时相的遥感影像数据,假定在两个相近时相之间地表比辐射率值不变,建立地表比辐射率与温度的反演模型。我们对不同的地表和大气条件进行了模拟计算,结果表明当大气温度廓线误差－２Ｋ－２Ｋ,水汽廓线误差±２０％时地表温度均方根误差小于１．５Ｋ,地表比辐射率均方根误差小于０．０２,地表辐射均方根误差为１％;当大气温度廓线误差－２Ｋ－２Ｋ,水汽廓线误差±１０％时,地表温度均方根误差小于１．０Ｋ,地表辐射均方根误差小于０．６％。     

降水气候强迫下非均匀地表区域平均径流的一种参数化方案

将任一中尺度区域的平均瞬间径流率考虑为区域平均降水量和地表土壤层水分渗透垦的余项.根据降水量在地理空间上分布的实测资料拟合其空间概率密度函数(PDF),并结合土壤入渗物理过程的数学描述及其经验公式,精确估计出地表土壤渗透率及其空间分布,由此建立区域地表径流率的统计-动力学估计方案.换言之,区域内地表产流率可视为区域平均降水量与区域平均的土壤下渗量之差值,而区域内土壤的平均下渗量又町分为非饱和区和饱和区两部分的下渗量来分别计算.就陆面水分循环的物理过程而言,地表入渗现象是在一定的下垫面特性基础上,由一定的水分供应源而形成的.根据大气降水向地表层输送水分的物理过程,在满足植被表层覆盖需水(截流水)和地表层土壤人渗水基础上,多余的降水量才会形成地表径流.凶此,推求地表产流率的主要关键在于地表土壤层需水量.为此奉文根据土壤水分通量方程推导出水分入渗公式.又从描述土壤水分和降水的空间PDF出发,推导出非均匀土壤含水量及降水气候强迫所形成的次网格尺度区域平均径流率计算公式.利用长江三角洲地区1996年降水量和土壤特性等实测资料建立区域平均地表径流率的估计公式,并对其影响凶素进行敏感性试验.结果表明,该方法与用Mosaic方法计算的区域径流率(或产流率)结果十分接近.由此可见,该文提出的降水气候强迫下非均匀地表区域平均径流的这种统计-动力参数化方案,具有相当的可靠性与可行性.