A Laboratory and Theoretical Study on the Uptake of SO2 Gas by Large and Small Water Drops Containing Heavy Metal Ions

Laboratory experiments have been carried out to investigate the uptake of sulfur dioxide by water drops containing heavy metal ions where the metal ions serve as catalysts to oxidise the taken up S(IV) into S(VI). During the gas uptake the drops were freely suspended at their terminal velocity in the airstream of the Mainz vertical wind tunnel. Two series of experiments were carried out, one with large millimeter size water drops containing manganese or iron ions, and the other with small water drops containing manganese ions and having radii in hundreds of micron size range. The experimental results were compared against model computations using the Kronig–Brink model and the fully mixed model, modified for the case that heavy metal ions present in the liquid phase act as catalysts for the oxidising process. The results of the model calculations show that there are only small differences between the predicted gas uptake according to the two models. In addition it was found that the experimental obtained results from the uptake of SO₂ by water drops containing heavy metal ions for both, large and small water drops did agree with the model results.     

Measurement of Carbon Dioxide Emissions Plumes from Prudhoe Bay, Alaska Oil Fields

Large carbon dioxide plumes with concentrations up to 45 ppm aboveambient levels were measured about 15 km downwind of the Prudhoe Bay, Alaskamajor oil production facilities, located at 70° N Lat. above the ArcticCircle. The measured emissions were 1.3 × 10³ metrictons (C) hour^-1 (11.4× 10⁶ metric tons(C) year^-1), six times greater than the combustion emissionsassumed by Jaffe and coworkers in J. Atmos. Chem. 20 (1995), 213–227,based on 1989 reported Prudhoe Bay oil facility fuel consumption data, andfour times greater than the total C emissions reported by the oil facilitiesfor the same months as the measurement time periods. Variations in theemissions were estimated by extrapolating the observed emissions at a singlealtitude for all tundra research transect flights conducted downwind of theoil fields. These 30 flights yielded an average emission rate of1.02 × 10³ metric tons (C) hour^-1 with astandard deviation of 0.33 × 10³. These quantity ofemissions are roughly equivalent to the carbon dioxide emissions of7–10 million hectares of arctic tussock tundra (Oechel and Vourlitis,Trends in Ecol. Evolution 9 (1994), 324–329).     

中国硫的供求现状和展望

从工业和农业两个方面供需现状分析，中国目前硫的供需基本平衡，且供略大于求。展望２０００年，中国硫的供求关系将出现缺口，需进一步开拓硫的潜在资源。从总体上看，目前中国土壤供硫情况尚好，但一些地区已开始出现缺硫和严重缺硫的状况，预测今后土壤缺硫状况将会加剧，希望各有关部门对此应给予充分注意     

Comparison of Aircraft and Ground-Based FluxMeasurements during OASIS95

Aircraft and ground-based measurements made during the1995 Australian OASIS field campaign are compared. The aircraft data were recorded during low-level flightsat 6 m above ground level and grid flights at altitudes of between 15 and 65 m, allin unstable atmospheric conditions. The low-level flights revealed an inadequate temperaturesensor response time, a correction for which was determined from subsequent work ina wind tunnel. Aircraft and ground-based measurements of mean wind speed, wind directionand air temperature agree to within 0.2 m s^-1, 4° and 0.9 °C respectively.Comparisons between aircraft and ground-based observations of the standarddeviations of vertical velocity, horizontal wind speed, air temperature and specifichumidity have slopes of 0.96, 0.97, 0.92 and 0.99 respectively but the observed scatter isroughly twice the random error expected due to the averaging length of the aircraft data andthe averaging period of the ground-based data. For the low-level flights, the ground-basedand aircraft measurements of sensible and latent heat flux show mean differences of 27 and-25 W m^-2 respectively, which reduce to 11 and -4 W m^-2 respectivelywhen analysis of aircraft data is limited to areas immediately adjacent to the fluxtowers. For the flights at 15 to 65 m above ground level, the mean differences between theground-based and aircraft measurements of sensible and latent heat flux are -22 and-1 W m^-2 respectively and these change to -1 and -7 W m^-2 respectively oncethe effect of surface heterogeneity is included. Aircraft and ground-based measurementsof net radiation agree to within 6% at one ground-based site but differ by 20% at a second.Aircraft measurements of friction velocity at 6 m above the ground agree well withground-based data, but those from flights between 15 and 65 m above ground level do not.This is because at these heights the aircraft measurements provide the local shear stress,not the surface shear stress. Overall, the level of agreement allows confidence in the aircraftdata provided due care is taken of instrument response times and differences in thesurfaces sampled by aircraft and ground-based systems.     

The Bulong Gold Deposit-a Quartz-Barite Vein Type Gold Deposit in Xinjiang:Geological Characteristics and S, He and Ar Isotopic Compositions

The Bulong gold deposit, located in the southwest Tianshan in China, occurs in the Upper Devonian finegrained clastic rocks. The gold orebodies are controlled by an gently inclined interlayer fractured zone. They are hosted only in quartz-barite veins though there are barite veins and quartz veins in the ore district. The δ34S values of pyrite in the ores range from 14.6‰ to 19.2‰ and those of barite from 35.0‰ to 39.6‰, indicating that the sulfur was derived from the strata. 3He/4He ratios of fluid inclusions in pyrite are 0.24-0.82 R/Ra, approximating to that of the crust. The 40Ar/39Ar ratios range from 338 to 471, slightly higher than that of the atmosphere. 40Ar /4He ratios of ore fluids range from 0.015 to 0.412 with a mean of 0.153. Helium and argon isotope compositions of fluid inclusions show that the ore fluids of the Bulong gold deposit were mainly derived from the crust.     

Bathymetric and geochemical investigation of Kawah Ijen Crater Lake, East Java, Indonesia

A bathymetric survey of Kawah Ijen crater lake was conducted by acoustic sounding in 1996 to compare the lake morphology with those measured in 1922, 1925 and 1938, and to calculate the present lake volume. Even though the lake experienced several hydrothermal eruptions, the maximum depth became shallower (182 m) than before (200 m), resulting in a reduced lake volume (3.0×10⁷ m³).Fifty-two major and minor constituents including rare earth elements and polythionates (PT) of the lake waters at various depths were determined by ICP-AES, ICP-MS and HPLC, respectively. These ions except for several volatile elements are taken up by lake fringe through congruent dissolution of pyroclastics of Kawah Ijen volcano. Most ions are homogeneously distributed throughout the lake, although PT showed a considerable vertical variation. Rare earth elements (REE) in the Kawah Ijen water as well as those from other hyper-acidic crater lakes show distribution patterns likely due to the three rock dissolution (preferential, congruent and residual) types, and their logarithmic concentrations linearly depend upon the pH values of the lake waters.Using the PT degradation kinetics data, production rates of PT, injection rates of SO₂ and H₂S into the lake were estimated to be 114, 86 and 30 tons/day, respectively. Also travel time of the spring water at the Banyupahit Riverhead from Kawah Ijen was estimated to be 600–1000 days through the consideration of decreasing rates of PT. Molten sulfur stocks containing Sn, Cu, Bi sulfides and Pb-barite exposed on the inner crater slope were presumed to be extinct molten sulfur pools at the former lake bottom. This was strongly supported by the barite precipitation temperature estimated through the consideration of the temperature dependence of Pb-chlorocomplex formation.     

Isotopic evidence of TSR origin for natural gas bearing high H_2S contents within the Feixianguan Formation of the northeastern Sichuan Basin, southwestern China

Isotopic evidence of TSR origin for natural gas bearing high H2S contents 1961 As the hazardous component of natural gas, the ex-istence of H2S, due to its extremely strong toxicity and corrosivity, not only decreases the percentage of hy-drocarbon gas within natural gas and reduces its in-dustrial value, it also threatens each aspect of drilling and exploitation. It frequently causes serious safety accidents[1] and leads to the E&P cost and risk of natural gas with higher H2S contents be…     

Evolution of Hydrothermal System at the Dizon Porphyry Cu-Au Deposit, Zambales, Philippines

Abstract. Evolution of hydrothermal system from initial porphyry Cu mineralization to overlapping epithermal system at the Dizon porphyry Cu‐Au deposit in western central Luzon, Zambales, Philippines, is documented in terms of mineral paragen‐esis, fluid inclusion petrography and microthermometry, and sulfur isotope systematics. The paragenetic stages throughout the deposit are summarized as follows; 1) stockwork amethystic quartz veinlets associated with chalcopyrite, bornite, magnetite and Au enveloped by chlorite alteration overprinting biotite alteration, 2) stockwork quartz veinlets with chalcopyrite and pyrite associated with Au and chalcopyrite and pyrite stringers in sericite alteration, 3) stringer quartz veinlets associated with molybdenite in sericite alteration, and 4) WNW‐trending quartz veins associated with sphalerite and galena at deeper part, while enargite and stibnite at shallower levels associated with advanced argillic alteration. Chalcopyrite and bornite associated with magnetite in quartz veinlet stockwork (stage 1) have precipitated initially as intermediate solid solution (iss) and bornite solid solution (bnss), respectively. Fluid inclusions in the stockwork veinlet quartz consist of gas‐rich inclusions and polyphase inclusions. Halite in polyphase inclusions dissolves at temperatures ranging from 360d?C to >500d?C but liquid (brine) and gas (vapor) do not homogenize at <500d?C. The maximum pressure and minimum temperature during the deposition of iss and bnss with stockwork quartz veinlets are estimated to be 460 bars and 500d?C. Fluid inclusions in veinlet stockwork quartz enveloped in sericite alteration (stage 2) consist mainly of gas‐rich inclusions and polyphase inclusions. In addition to the possible presence of saturated NaCl crystals at the time of entrapment of fluid inclusions that exhibit the liquid‐vapor homogenization temperatures lower than the halite dissolution temperatures in some samples, wide range of temperatures of halite dissolution and liquid‐vapor homogenization of polyphase inclusions from 230d?C to >500d?C and from 270d?C to >500d?C, respectively, suggests heterogeneous entrapment of gaseous vapor and hypersaline brine. The minimum pressure and temperature are estimated to be about 25 bars and 245d?C. Fluid inclusions in veinlet quartz associated with molybdenite (stage 3) are dominated by gas‐rich inclusions accompanied with minor liquid‐rich inclusions that homogenize at temperatures between 350d?C and 490d?C. Fluid inclusions in vuggy veinlet quartz associated with stibnite (stage 4) consist mainly of gas‐rich inclusions with subordinate polyphase inclusions that do not homogenize below 500d?C. Fluid inclusions in veinlet quartz associated with galena and sphalerite (stage 4) are composed of liquid‐rich two‐phase inclusions, and they homogenize into liquid phase at temperatures ranging widely from 190d?C to 300d?C (suggesting boiling) and the salinity ranges from 1.0 wt% to 3.4 wt% NaCl equivalent. A pressure of about 15 bars is estimated for the dilute aqueous solution of 190d?C from which veinlet quartz associated with galena and sphalerite precipitated. In addition to a change in temperature‐pressure regime from lithostatic pressure during the deposition of iss and bnss with stockwork quartz veinlets to hydrostatic pressure during fracture‐controlled quartz veinlet associated with galena and sphalerite, a decrease in pressure is supposed to have occurred due to unroofing or removal of the overlying piles during the temperature decrease in the evolution of hydrothermal system. The majority of the sulfur isotopic composition of sulfides ranges from ±0 % to +5 %. Sulfur originated from an iso‐topically uniform and homogeneous source, and the mineralization occurred in a single hydrothermal system.     

Chemistry and Sulfur Isotopes in a Chert-dominant Sequence around the Stratiform Manganese Deposit of the Noda-Tamagawa Mine, Northern Kitakami Terrane, Northeast Japan: Implication for Paleoceanographic Environmental Setting

Abstract. Chemistry and sulfur isotopes are analyzed for a series of rocks in the chert‐dominant sequence around the stratiform manganese ore deposit of the Noda‐Tamagawa mine in the northern Kitakami Terrane, northeast Japan. The sequence is litholog‐ically classified into six units in ascending order: lower bedded chert, lower black shale, massive chert, manganese ore, upper black shale, and upper bedded chert. The rocks around the manganese ore deposit exhibit anomalous enrichment in Ni (max. 337 ppm), Zn (102) and U (30) in the upper part of lower bedded chert, Mo (122), Tl (79) and Pb (33) in the lower black shale, MnO, Cu (786) and Co (62) in the manganese ore, and As (247) and Sb (17) in the upper black shale. The aluminum‐normalized profiles reveal zonal enrichment of redox‐sensitive elements around the manganese bed: Zn‐Ni‐Fe‐Mo‐U(‐Co), Tl‐Pb(‐Mo), Mn‐Fe‐Cu‐V‐Cr‐Co(‐Zn) and As‐Sb in ascending order. The uppermost part of the lower bedded chert and black shale exhibit negative Ce/Ce* values, whereas the massive chert, manganese ore and lower part of the upper bedded chert display positive values. The isotopic δ³⁴S values are 0±6 % in the lower part of the lower bedded chert, ‐19 to ‐42 % in the upper part of the lower bedded chert, ‐36 to ‐42 % in the lower black shale, ‐28 to ‐35 % in the massive chert, manganese ore and upper black shale, and ‐23±5 % in the upper bedded chert. Thus, there is a marked negative shift in δ³⁴S values in the lower bedded chert, and an upward‐increasing trend in δ³⁴S through the manganese ore horizon. The present data provide evidence for a change in the paleoceanographic environmental resulting from inflow of oxic deepwater into the stagnant anoxic ocean floor below the manganese ore horizon. This event is likely to have triggered the precipitation of manganese oxyhydroxides. The redistribution of redox‐sensitive elements through the formation of metalliferous black shale and manganese carbonate ore may have occurred in association with bacterial decomposition of organic matter during early diagenesis of initial manganese oxyhydroxides.