钴—5—Br—PADNm络合物的光度性质研究及其应用

本文研究了钴(Ⅱ)-5-Br-PADNm络合物的光度性质。在pH5.0缓冲溶液中,有TritonX-100存在时,Co~(2 )与5-Br-PADNm形成1:2红色络合物,λ_(max)为547nm,ε为1.35×10~5l·mol~(-1)·cm~(-1)。所提出的方法用于矿石及茶叶中Co的测定,得到满意结果。     

Crustal structure of the Lofoten–Vesterålen continental margin, off Norway

By compiling wide-angle seismic velocity profiles along the 400-km-long Lofoten–Vesterålen continental margin off Norway, and integrating them with an extensive seismic reflection data set and crustal-scale two-dimensional gravity modelling, we outline the crustal margin structure. The structure is illustrated by across-margin regional transects and by contour maps of depth to Moho, thickness of the crystalline crust, and thickness of the 7+ km/s lower crustal body. The data reveal a normal thickness oceanic crust seaward of anomaly 23 and an increase in thickness towards the continent–ocean boundary associated with breakup magmatism. The southern boundary of the Lofoten–Vesterålen margin, the Bivrost Fracture Zone and its landward prolongation, appears as a major across-margin magmatic and structural crustal feature that governed the evolution of the margin. In particular, a steeply dipping and relatively narrow, 10–40-km-wide, Moho-gradient zone exists within a continent–ocean transition, which decreases in width northward along the Lofoten–Vesterålen margin. To the south, the zone continues along the Vøring margin, however it is offset 70–80 km to the northwest along the Bivrost Fracture Zone/Lineament. Here, the Moho-gradient zone corresponds to a distinct, 25-km-wide, zone of rapid landward increase in crustal thickness that defines the transition between the Lofoten platform and the Vøring Basin. The continental crust on the Lofoten–Vesterålen margin reaches a thickness of 26 km and appears to have experienced only moderate extension, contrasting with the greatly extended crust in the Vøring Basin farther south. There are also distinct differences between the Lofoten and Vesterålen margin segments as revealed by changes in structural style and crustal thickness as well as in the extent of elongate potential-field anomalies. These changes may be related to transfer zones. Gravity modelling shows that the prominent belt of shelf-edge gravity anomalies results from a shallow basement structural relief, while the elongate Lofoten Islands belt requires increased lower crustal densities along the entire area of crustal thinning beneath the islands. Furthermore, gravity modelling offers a robust diagnostic tool for the existence of the lower crustal body. From modelling results and previous studies on- and off-shore mid-Norway, we postulate that the development of a core complex in the middle to lower crust in the Lofoten Islands region, which has been exhumed along detachments during large-scale extension, brought high-grade, lower crustal rocks, possibly including accreted decompressional melts, to shallower levels.     

Fe-ZSM-5分子筛催化降解染料废水的研究

传统的Fenton均相亚铁盐催化剂处理染料废水,具有难以避免的二次污染和亚铁离子流失问题。分子筛催化剂相比传统催化剂具有高效环保的特点,在催化氧化染料废水领域有着良好的前景。本文通过液相离子交换法制备了Fe-ZSM-5非均相分子筛催化剂,替代传统的亚铁盐催化剂,应用X射线衍射对制备的Fe-ZSM-5分子筛催化剂进行表征,表明随离子交换次数的增加,Fe-ZSM-5催化剂负载的铁量上升,且较好地保持了分子筛结构,有利于提高亚铁离子的催化能力。通过实验确定了Fe-ZSM-5催化剂催化反应的最佳温度、pH值、Fe-ZSM-5的用量、反应时间等工艺参数,比较了Fe-ZSM-5催化剂和传统Fenton均相催化剂降解染料废水的脱色率和废水中铁离子的残留量,结果表明Fe-ZSM-5的脱色率达到98.5%,相比于Fenton均相催化剂的脱色率提升约3%;两种催化剂的铁离子残留量差别显著,Fe-ZSM-5催化剂处理的废水中只产生微量的Fe离子,可以认为Fe-ZSM-5非均相分子筛催化剂有效地解决了催化剂损耗和二次污染问题。     

Performance of mixed and enhanced finite elements for strain localization in hypoplasticity

Displacement and mixed finite element formulations of shear localization in materials are presented. The formulations are based on hypoplastic constitutive laws for soils and the mixed enhanced treatment involving displacement, strain and stress rates as independently varied fields. Included in these formulations are the standard displacement method, the three‐field mixed formulation, the enhanced assumed strain method and the mixed enhanced strain method. Several numerical examples demonstrating the capability and performance of the different finite element formulations are presented. The numerical results are compared with available experimental data for Hostun RF sand and numerical results for Karlsruhe sand on biaxial tests. Copyright © 2011 John Wiley & Sons, Ltd.     

Stability at high-pressure,elastic behaviour and pressure-induced structural evolution of CsAlSi<Subscript>5</Subscript>O<Subscript>12</Subscript>, a potential host for nuclear waste

The elastic and structural behaviour of the synthetic zeolite CsAlSi₅O₁₂ (a = 16.753(4), b = 13.797(3) and c = 5.0235(17) Å, space group Ama2, Z = 2) were investigated up to 8.5 GPa by in situ single-crystal X-ray diffraction with a diamond anvil cell under hydrostatic conditions. No phase-transition occurs within the P-range investigated. Fitting the volume data with a third-order Birch–Murnaghan equation-of-state gives: V ₀ = 1,155(4) ų, K _T0 = 20(1) GPa and K′ = 6.5(7). The “axial moduli” were calculated with a third-order “linearized” BM-EoS, substituting the cube of the individual lattice parameter (a ³, b ³, c ³) for the volume. The refined axial-EoS parameters are: a ₀ = 16.701(44) Å, K _T0a = 14(2) GPa (β_a = 0.024(3) GPa^?1), K′ _a = 6.2(8) for the a-axis; b ₀ = 13.778(20) Å, K _T0b = 21(3) GPa (β_b = 0.016(2) GPa^?1), K′ _b = 10(2) for the b-axis; c ₀ = 5.018(7) Å, K _T0c = 33(3) GPa (β_c = 0.010(1) GPa^?1), K′ _c = 3.2(8) for the c-axis (K _T0a:K _T0b:K _T0c = 1:1.50:2.36). The HP-crystal structure evolution was studied on the basis of several structural refinements at different pressures: 0.0001 GPa (with crystal in DAC without any pressure medium), 1.58(3), 1.75(4), 1.94(6), 3.25(4), 4.69(5), 7.36(6), 8.45(5) and 0.0001 GPa (after decompression). The main deformation mechanisms at high-pressure are basically driven by tetrahedral tilting, the tetrahedra behaving as rigid-units. A change in the compressional mechanisms was observed at P ≤ 2 GPa. The P-induced structural rearrangement up to 8.5 GPa is completely reversible. The high thermo-elastic stability of CsAlSi₅O_12, the immobility of Cs at HT/HP-conditions, the preservation of crystallinity at least up to 8.5 GPa and 1,000°C in elastic regime and the extremely low leaching rate of Cs from CsAlSi₅O₁₂ allow to consider this open-framework silicate as functional material potentially usable for fixation and deposition of Cs radioisotopes.     

Direct terrestrial-marine correlation demonstrates surprisingly late onset of the last interglacial in central Europe

An interdisciplinary study of a small sedimentary basin at Neumark Nord 2 (NN2), Germany, has yielded a high-resolution record of the palaeomagnetic Blake Event, which we are able to place at the early part of the last interglacial pollen sequence documented from the same section. We use this data to calculate the duration of this stratigraphically important event at 3400 ± 350 yr. More importantly, the Neumark Nord 2 data enables precise terrestrial-marine correlation for the Eemian stage in central Europe. This shows a remarkably large time lag of ca. 5000 yr between the MIS 5e ‘peak’ in the marine record and the start of the last interglacial in this region.     

Circulation characteristics of a monsoon depression during BOBMEX-99 using high-resolution analysis

The skill and efficiency of a numerical model mostly varies with the quality of initial values, accuracy on parameterization of physical processes and horizontal and vertical resolution of the model. Commonly used low-resolution reanalyses are hardly able to capture the prominent features associated with organized convective processes in a monsoon depression. The objective is to prepare improved high-resolution analysis by the use of MM5 modelling system developed by the Pennsylvania State University/National Center for Atmospheric Research (PSU/NCAR). It requires the objective comparison of high and low-resolution analysis datasets in assessing the specific convective features of a monsoon depression. For this purpose, reanalysis datasets of NCAR/NCEP (National Center for Atmospheric Research/National Centers for Environmental Prediction) at a horizontal resolution of 2.5‡ (latitude/longitude) have been used as first guess in the objective analysis scheme. The additional asynoptic datasets obtained during BOBMEX-99 are utilized within the assimilation process. Cloud Motion Wind (CMW) data of METEOSAT satellite and SSM/I surface wind data are included for the improvement of derived analysis. The multiquadric (MQD) interpolation technique is selected and applied for meteorological objective analysis at a horizontal resolution of 30 km. After a successful inclusion of additional data, the resulting reanalysis is able to produce the structure of convective organization as well as prominent synoptic features associated with monsoon depression. Comparison and error verifications have been done with the help of available upper-air station data. The objective verification reveals the efficiency of the analysis scheme.     

汶川地震诱发大型滑坡分布规律研究

2008年5 12汶川地震由于其超常的地震动力,触发了数百处大型滑坡灾害。本文以遥感解译所获取的汶川地震区112处面积大于50000m2大型滑坡的基本信息为基础,结合代表性大型滑坡实例的现场调绘,对汶川地震诱发大型滑坡的发育分布规律进行了较系统的研究。结果表明,汶川地震大型滑坡分布除表现出与汶川地震诱发区域性地质灾害类似的分布规律之外,因主要源于发震断层瞬间大幅度错动的直接地震动力引发的大型滑坡,其发育分布及滑动、运动方式还表现出自身的特点,具体可归结为以下几种效应: (1)距离效应:约80%的大型滑坡集中分布于发震断裂地表破裂带两侧5km的范围内,距离越远,滑坡分布数量越少; (2)锁固段效应:汶川地震诱发的大型滑坡主要集中分布在与发震断裂的交叉、错列、转换部位及NE段末端等5个集中区段。其中,红白-茶坪段是大型滑坡最为集中发育段,不仅滑坡数量多,而且规模大,汶川地震诱发的最大两处滑坡均分布于此段。其次为断裂NE段末端的南坝-东河口段,该段大型滑坡密集发育,东河口滑坡和窝前滑坡等大型滑坡均出露于此段; (3)上下盘效应:绝大多数(70%)大型滑坡都位于活动断裂的上盘,存在明显的上下盘效应; (4)方向效应:在与发震断裂带近于垂直的沟谷斜坡中,在地震波传播的背坡面一侧的滑坡发育密度明显大于迎坡面一侧,存在背坡面效应。同时,大型滑坡的滑动及运动方向还与各区段断层的错动方向有一定的相关性。在断层活动以右旋走滑为主的青川境内,有相当数量的滑坡表现出向NE方向滑动和运动的特点。     

赣西袁水坳陷卡林型金矿床地质特征

赣西卡林型金矿受地层层位及构造控制,呈层状、似层状及透镜状产出。规模为中小型。金矿化与硅化、黄铁矿化及有机碳关系密切。主成矿温度平均150℃左右,成矿压力为247×105Pa～608×105Pa。成矿流体是以大气降水为主的热卤水。