The double solid reactant method: II. An application to the shallow groundwaters of the Porto Plain,Vulcano Island (Italy)

This paper presents an example of application of the double solid reactant method (DSRM) of Accornero and Marini (Environmental Geology, 2007a), an effective way for modeling the fate of several dissolved trace elements during water–rock interaction. The EQ3/6 software package was used for simulating the irreversible water–rock mass transfer accompanying the generation of the groundwaters of the Porto Plain shallow aquifer, starting from a degassed diluted crateric steam condensate. Reaction path modeling was performed in reaction progress mode and under closed-system conditions. The simulations assumed: (1) bulk dissolution (i.e., without any constraint on the kinetics of dissolution/precipitation reactions) of a single solid phase, a leucite-latitic glass, and (2) precipitation of amorphous silica, barite, alunite, jarosite, anhydrite, kaolinite, a solid mixture of smectites, fluorite, a solid mixture of hydroxides, illite-K, a solid mixture of saponites, a solid mixture of trigonal carbonates and a solid mixture of orthorhombic carbonates. Analytical concentrations of major chemical elements and several trace elements (Cr, Mn, Fe, Ni, Cu, Zn, As, Sr and Ba) in groundwaters were satisfactorily reproduced. In addition to these simulations, similar runs for a rhyolite, a latite and a trachyte permitted to calculate major oxide contents for the authigenic paragenesis which are comparable, to a first approximation, with the corresponding data measured for local altered rocks belonging to the silicic, advanced argillic and intermediate argillic alteration facies. The important role played by both the solid mixture of trigonal carbonates as sequestrator of Mn, Zn, Cu and Ni and the solid mixture of orthorhombic carbonates as scavenger of Sr and Ba is emphasized.

EPR investigation of the methyl radical,the hydrogen atom and carbon oxide radicals in Maxixe-type beryl

The EPR spectra of Maxixe-type beryl contain a large number of overlapping signals. The angular dependence of the 1:3:3:1 signal typical for the CH₃ radical shows that this radical is located at the center of the channel cavity with its symmetry axis parallel to the crystal c-axis and is rotating around this axis. Its EPR spectrum is axially symmetric with g _// = 2.00263, g _⊥ = 2.00249 and A_// = 2.288 mT, A_⊥ = 2.256 mT. These anisotropies have the opposite signs of those found for surface-adsorbed methyl radicals. Hydrogen atoms are located at position 2a at the center of the beryl cavity and the EPR parameters of the narrow doublet signal are A ₀ = 1,407 MHz and g = 2.00230. Another doublet signal, which is broader and has axial symmetry with g _// = 2.00265, g _⊥ = 2.00625 and A_// = 0.895 mT, A_⊥ = 0.885 mT, could come from a HCO₃ radical. One narrow and easily saturated signal with g _// = 2.00227 and g _⊥ = 2.00386 is interpreted to arise from a carbon monoxide radical in the beryl channel, oriented with its axis parallel to the crystal c-axis. Additional weak doublet lines, which have similar g values as the carbon monoxide radical, are created by nearby hydrogens. A powder spectrum with g _// = 2.0017 and g _⊥ = 2.0004 appears upon UV irradiation of the single crystal and is easily saturated. This spectrum is interpreted to arise from a carbon dioxide radical, which rotates around its symmetry axis.     

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran     

滑坡体三维地质建模与可视化分析

针对滑坡地质研究的自身特点,提出了面向滑坡地质体三维建模的NURBS-BRep混合数据结构和地质结构单元实体构造技术.通过对滑坡基础地质数据的预处理、滑坡数字地形和滑动面的三维建模、地质结构面的系统构造、地质结构体的生成和显示,形成了一套完整的滑坡三维地质模型的构建方法.将该方法应用于某水库滑坡,建立了相应的三维滑坡地质模型,并基于此模型进行了三维剖切分析、数字钻孔、等值线生成、滑块自动剖分、滑坡失稳可视化动态模拟和滑坡体方量精确计算等一系列实用的可视化分析,为滑坡稳定性的准确计算和客观评价提供了有力的支持.     

舟山国家石油储备基地堆载预压加固效果分析

介绍了舟山国家石油储备基地试验区软基堆载预压大型现场试验结果,根据现场试验测得的数据,分析了软土地基堆载预压下沉降变化规律、分层沉降变化规律、深层土体位移变化规律、超静孔隙水压力变化规律,进一步探讨了根据应力和应变分析得到的地基固结性状,其中通过应变分析得到适用于储备基地的沉降经验系数m。结果表明,打设塑料排水板结合堆载预压处理软弱地基具有良好的效果。     

Predictability of Interannual Variability in the Kuroshio Transport South of Japan Based on Wind Stress Data over the North Pacific

It is expected that a roughly two-year forecast of the Kuroshio transport variation can be made from a past record of wind stress data over the ocean, since it takes nearly ten years for the first-mode baroclinic Rossby wave to traverse the entire basin in the midlatitude North Pacific (∼30°N). We therefore investigated the predictability using an ocean general circulation model driven by the wind stress data from the National Centers for Environmental Prediction/National Center for Atmospheric Research (NCEP/NCAR) reanalysis. Referring to a hindcast experiment as the control run, we carried out fifteen forecast experiments, the initial conditions of which are taken from the hindcast experiment at intervals of two years during the period from the end of 1969 to the end of 1997. Each of the forecast experiments is driven only by wind stress in the year preceding each experiment. The forecasted Kuroshio transport anomaly south of Japan agrees better with the hindcasted one during the first two years of the forecast in most cases. In some cases, however, significant disagreements occur, most of which are likely due to larger unpredictable variations caused by wind stress anomalies near Japan. At the end of forecast year 2, the anomaly correlation coefficient is about 0.7, and rms of the forecast error is smaller than rms of the hindcasted anomaly. These results indicate that the prediction of the interannual variability in the Kuroshio transport could be made two years in advance at a statistically significant level. This revised version was published online in July 2006 with corrections to the Cover Date.     

一种计算台风风场的方法

揭示Ｒａｎｋｉｎｅ涡风场模式和Ｊｅｌｅｓｎｉａｎｓｋｉ风场模式之间的联系，并设计了一种台风风场分布模式，它的风速分布曲线落在Ｊｅｌｅｓｎｉａｎｓｋｉ和Ｒａｎｋｉｎｅ涡两个风场模式的风速分布曲线之间，具有一个既优于Ｊｅｌｅｓｎｉａｎｓｋｉ又优于Ｒａｎｋｉｎｅ涡的风速衰减速率，因此它同时克服了Ｒａｎｋｉｎｅ涡模式计算风速偏小和Ｊｅｌｅｓｎｉａｎｓｋｉ模式计算风速偏大的缺点，以一种比较合理的变化趋势向远方衰减，成为一个比较切合实际的台风风场分布模式。同时，文中提出的移行台风风场计算方法对宫崎正卫、上野武夫和Ｊｅｌｅｓｎｉａｎｓｋｉ模式都有一定的改进。     

在各类天气系统影响下石臼港沿岸波浪场的分布

本文查阅了从１９７３－１９８５，１３年的历史资料，对石臼港沿岸波浪场进行了详细的分类、统计分析和计算，提出了各类较强天气系统影响石（即指石臼港）的极端区域，同时获得了石港沿岸各类天气系统影响下的波浪分布特点以及波高计算式，为保障石港的生产及港口建设为石港的波了提供了有益的分析数据和预报手段。     

一种新的波浪变形三维数值模式──0-1混合型边界元

为提高边界元法模拟三维波场波浪变形的数值计算精度,借鉴常数元和线性元剖分方式、波势函数及波势函数法向导数对单元节点设定的各自适应性,提出了一种新的单元剖分模式──0-1混合型边界元,以控制和减缓由于计算误差累计而造成的波浪数值计算上的“横向振动”,借此结合边界元法的分区模式可实现较大范围的波场线性波浪变形计算,并为时域内的波浪非线性变形计算提供时间步长的数值保证.     

渤海三维海洋温度和海流数值预报

"十·五"期间,我国开展了三维海洋温度和海流数值预报的业务化研究工作.经过3年的努力,渤海三维海洋温度和海流数值预报系统研制完成,并于2003年10月,开始试预报.本文对该预报系统以及运行情况进行了介绍,并分析了所存在的问题和发展方向.