Deciphering potential groundwater zone in hard rock through the application of GIS

Remote Sensing and Geographic Information System has become one of the leading tools in the field of hydrogeological science, which helps in assessing, monitoring and conserving groundwater resources. It allows manipulation and analysis of individual layer of spatial data. It is used for analysing and modelling the interrelationship between the layers. This paper mainly deals with the integrated approach of Remote Sensing and geographical information system (GIS) to delineate groundwater potential zones in hard rock terrain. The remotely sensed data at the scale of 1:50,000 and topographical information from available maps, have been used for the preparation of ground water prospective map by integrating geology, geomorphology, slope, drainage-density and lineaments map of the study area. Further, the data on yield of aquifer, as observed from existing bore wells in the area, has been used to validate the groundwater potential map. The final result depicts the favourable prospective zones in the study area and can be helpful in better planning and management of groundwater resources especially in hard rock terrains.     

The double solid reactant method: II. An application to the shallow groundwaters of the Porto Plain,Vulcano Island (Italy)

This paper presents an example of application of the double solid reactant method (DSRM) of Accornero and Marini (Environmental Geology, 2007a), an effective way for modeling the fate of several dissolved trace elements during water–rock interaction. The EQ3/6 software package was used for simulating the irreversible water–rock mass transfer accompanying the generation of the groundwaters of the Porto Plain shallow aquifer, starting from a degassed diluted crateric steam condensate. Reaction path modeling was performed in reaction progress mode and under closed-system conditions. The simulations assumed: (1) bulk dissolution (i.e., without any constraint on the kinetics of dissolution/precipitation reactions) of a single solid phase, a leucite-latitic glass, and (2) precipitation of amorphous silica, barite, alunite, jarosite, anhydrite, kaolinite, a solid mixture of smectites, fluorite, a solid mixture of hydroxides, illite-K, a solid mixture of saponites, a solid mixture of trigonal carbonates and a solid mixture of orthorhombic carbonates. Analytical concentrations of major chemical elements and several trace elements (Cr, Mn, Fe, Ni, Cu, Zn, As, Sr and Ba) in groundwaters were satisfactorily reproduced. In addition to these simulations, similar runs for a rhyolite, a latite and a trachyte permitted to calculate major oxide contents for the authigenic paragenesis which are comparable, to a first approximation, with the corresponding data measured for local altered rocks belonging to the silicic, advanced argillic and intermediate argillic alteration facies. The important role played by both the solid mixture of trigonal carbonates as sequestrator of Mn, Zn, Cu and Ni and the solid mixture of orthorhombic carbonates as scavenger of Sr and Ba is emphasized.

Assessing soil erosion in Mediterranean karst landscapes of Lebanon using remote sensing and GIS

Maps showing the potential for soil erosion at 1:100,000 scale are produced in a study area within Lebanon that can be used for evaluating erosion of Mediterranean karstic terrain with two different sets of impact factors built into an erosion model. The first set of factors is: soil erodibility, morphology, land cover/use and rainfall erosivity. The second is obtained by the first adding a fifth factor, rock infiltration. High infiltration can reflect high recharge, therefore decreasing the potential of surface runoff and hence the quantity of transported materials. Infiltration is derived as a function of lithology, lineament density, karstification and drainage density, all of which can be easily extracted from satellite imagery. The influence of these factors is assessed by a weight/rate approach sharing similarities between quantitative and qualitative methods and depending on pair-wise comparison matrix.The main outcome was the production of factorial maps and erosion susceptibility maps (scale 1:100,000). Spatial and attribute comparison of erosion maps indicates that the model that includes a measure of rock infiltration better represents erosion potential. Field investigation of rills and gullies shows 87.5% precision of the model with rock infiltration. This is 17.5% greater than the precision of the model without rock infiltration. These results indicate the necessity and importance of integrating information on infiltration of rock outcrops to assess soil erosion in Mediterranean karst landscapes.     

Mapping ambivalence: Exploring the geographies of community change and rails-to-trails development using photo-based Q method and PPGIS

As the literature on trail development suggests, recreational trail projects can generate conflicts and controversies, particularly when built on abandoned rail corridors through developed areas. These conflicts are often understood as “not in my back yard” (NIMBY) reactions, suggesting a spatial proximity to conflict which increases as one draws closer to the proposed trail. This research seeks to understand local residents’ perceptions and reactions to recreational trail development in the City of Delaware (Ohio, USA). It addresses two spatially infused questions: Does the potential for conflict related to trail development increase as people live closer to a potential trail (the NIMBY factor)? Can important qualitative factors about favorable and unfavorable land uses including potential recreational trail sites be defined using a participatory methodology and then represented in GIS? The study used a mixed-method approach to collect and analyze qualitative data from a group of local residents. Each participant was interviewed and asked to sort 19 pictures related to trail development. After each of the sorts, participants were asked to explain why they ranked the pictures the way they did. Results of the picture sorts were then analyzed using Q method and mapped with GIS. The results show that spatial proximity matters in the context of trail development and potential NIMBY reactions to trails. Significant differences were found in the picture sorts that reveal the importance of proximity and location, although in a manner contrary to the assumptions in the writings on rails-to-trails. Through combining qualitative methods, Q analysis and PPGIS analysis, the research shows that qualitative place-based studies are capable of generating insights about the complexities of situated geographic change such as recreational trail development.     

Contribution of the SISCam Web-based GIS to the seismotectonic study of Campania (Southern Apennines): an example of application to the Sannio-area

In this article the implementation and potential of the Seismotectonic Information System of the Campania Region (SISCam) are described, in particular an application of this Web-based GIS system to the seismotectonic analysis of the Sannio area (Southern Apennines) is performed. WEB-GIS technologies greatly contribute to both the environmental monitoring and the disaster management of areas affected by high natural risks. Specifically the SISCam system has been developed with the aim of providing easy access and fast diffusion, through Internet technology, of the most significant geological, geophysical, and territorial data relative to the Campania Region. The Sannio area has been selected as our application example because it is among the most active seismic regions in Italy. This portion of the Southern Apennines which was hit by the June 5, 1688 strong earthquake (M _W = 6.7, CPTI 1999) and by some low- and moderate-energy seismic sequences (1990–1992, 1997), is characterized by a complex inherited tectonic setting and low-tectonic deformation rates that hide the seismogenic sources position. Since this case study turned out to be complicated, the use of the SIScam WEB-GIS has become indispensable because it allowed us to visualize, integrate and analyze all the data available, in order to obtain an accurate and direct picture of the seismotectonic setting of the area. Moreover, a different approach of data analysis was necessary, due to the lack of up-to-date neotectonic and structural data; therefore, the operation of this GIS system enabled us to process and generate some original informative layers, through image analysis, such as new structural lineaments represented on a map of the potential active faults of the area, which has been the final result of our application, as a contribution to new knowledge about the local seismic risk parameters.     

EPR investigation of the methyl radical,the hydrogen atom and carbon oxide radicals in Maxixe-type beryl

The EPR spectra of Maxixe-type beryl contain a large number of overlapping signals. The angular dependence of the 1:3:3:1 signal typical for the CH₃ radical shows that this radical is located at the center of the channel cavity with its symmetry axis parallel to the crystal c-axis and is rotating around this axis. Its EPR spectrum is axially symmetric with g _// = 2.00263, g _⊥ = 2.00249 and A_// = 2.288 mT, A_⊥ = 2.256 mT. These anisotropies have the opposite signs of those found for surface-adsorbed methyl radicals. Hydrogen atoms are located at position 2a at the center of the beryl cavity and the EPR parameters of the narrow doublet signal are A ₀ = 1,407 MHz and g = 2.00230. Another doublet signal, which is broader and has axial symmetry with g _// = 2.00265, g _⊥ = 2.00625 and A_// = 0.895 mT, A_⊥ = 0.885 mT, could come from a HCO₃ radical. One narrow and easily saturated signal with g _// = 2.00227 and g _⊥ = 2.00386 is interpreted to arise from a carbon monoxide radical in the beryl channel, oriented with its axis parallel to the crystal c-axis. Additional weak doublet lines, which have similar g values as the carbon monoxide radical, are created by nearby hydrogens. A powder spectrum with g _// = 2.0017 and g _⊥ = 2.0004 appears upon UV irradiation of the single crystal and is easily saturated. This spectrum is interpreted to arise from a carbon dioxide radical, which rotates around its symmetry axis.     

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran     

Implementation of reconstructed geomorphologic units in landslide susceptibility mapping: the Melen Gorge (NW Turkey)

In the international literature, although considerable amount of publications on the landslide susceptibility mapping exist, geomorphology as a conditioning factor is still used in limited number of studies. Considering this factor, the purpose of this article paper is to implement the geomorphologic parameters derived by reconstructed topography in landslide susceptibility mapping. According to the method employed in this study, terrain is generalized by the contours passed through the convex slopes of the valleys that were formed by fluvial erosion. Therefore, slope conditions before landsliding can be obtained. The reconstructed morphometric and geomorphologic units are taken into account as a conditioning parameter when assessing landslide susceptibility. Two different data, one of which is obtained from the reconstructed DEM, have been employed to produce two landslide susceptibility maps. The binary logistic regression is used to develop landslide susceptibility maps for the Melen Gorge in the Northwestern part of Turkey. Due to the high correct classification percentages and spatial effectiveness of the maps, the landslide susceptibility map comprised the reconstructed morphometric parameters exhibits a better performance than the other. Five different datasets are selected randomly to apply proper sampling strategy for training. As a consequence of the analyses, the most proper outcomes are obtained from the dataset of the reconstructed topographical parameters and geomorphologic units, and lithological variables that are implemented together. Correct classification percentage and root mean square error (RMSE) values of the validation dataset are calculated as 86.28% and 0.35, respectively. Prediction capacity of the different datasets reveal that the landslide susceptibility map obtained from the reconstructed parameters has a higher prediction capacity than the other. Moreover, the landslide susceptibility map obtained from the reconstructed parameters produces logical results.     

Soil erosion susceptibility assessment and validation using a geostatistical multivariate approach: a test in Southern Sicily

A certain number of studies have been carried out in recent years that aim at developing and applying a model capable of assessing water erosion of soil. Some of these have tried to quantitatively evaluate the volumes of soil loss, while others have focused their efforts on the recognition of the areas most prone to water erosion processes. This article presents the results of a research whose objective was that of evaluating water erosion susceptibility in a Sicilian watershed: the Naro river basin. A geomorphological study was carried out to recognize the water erosion landforms and define a set of parameters expressing both the intensity of hydraulic forces and the resistance of rocks/soils. The landforms were mapped and classified according to the dominant process in landsurfaces affected by diffuse or linear water erosion. A GIS layer was obtained by combining six determining factors (bedrock lithology, land use, soil texture, plan curvature, stream power index and slope-length factor) in unique conditions units. A geostatistical multivariate approach was applied by analysing the relationships between the spatial distributions of the erosion landforms and the unique condition units. Particularly, the density of eroded area for each combination of determining factors has been calculated: such function corresponds, in fact, to the conditional probability of erosion landforms to develop, under the same geoenvironmental conditions. In light of the obtained results, a general geomorphologic model for water erosion in the Naro river basin can be depicted: cultivated areas in clayey slopes, having fine-medium soil texture, are the most prone to be eroded; linear or diffuse water erosion processes dominate where the topography is favourable to a convergent or divergent runoff, respectively. For each of the two erosion process types, a susceptibility map was produced and submitted to a validation procedure based on a spatial random partition strategy. Both the success of the validation procedure of the susceptibility models and the geomorphological coherence of the relationships between factors and process that such models suggest, confirm the reliability of the method and the goodness of the predictions.