Threshold velocity for wind erosion: the effects of porous fences

Porous fence is a kind of artificial windbreak that has many practical applications. The threshold wind velocities at different distances downwind from porous fences were measured and the corresponding characteristics of particle movement observed to assess their shelter effect. It is found that the fence’s porosity is the key factor that determines the resulting shelter effect. The area near a fence can be typically classified into five regions, each with a different mode of particle movement. Dense fences, and especially solid fences, favor the accumulation of sand upwind of the fences. Fences with porosities of 0.3–0.4 produce the maximum threshold wind velocity; those with porosities of 0.3–0.6 (depending on the fence height) provide the maximum effective shelter distance. It is confirmed that the fence porosities of 0.3–0.4 that have been proposed for practical application in previous research are the most effective for abating wind erosion.     

Net Energy Payback and CO2 Emissions from Three Midwestern Wind Farms: An Update

This paper updates a life-cycle net energy analysis and carbon dioxide emissions analysis of three Midwestern utility-scale wind systems. Both the Energy Payback Ratio (EPR) and CO₂ analysis results provide useful data for policy discussions regarding an efficient and low-carbon energy mix. The EPR is the amount of electrical energy produced for the lifetime of the power plant divided by the total amount of energy required to procure and transport the materials, build, operate, and decommission the power plants. The CO₂ analysis for each power plant was calculated from the life-cycle energy input data. A previous study also analyzed coal and nuclear fission power plants. At the time of that study, two of the three wind systems had less than a full year of generation data to project the life-cycle energy production. This study updates the analysis of three wind systems with an additional four to eight years of operating data. The EPR for the utility-scale wind systems ranges from a low of 11 for a two-turbine system in Wisconsin to 28 for a 143-turbine system in southwestern Minnesota. The EPR is 11 for coal, 25 for fission with gas centrifuge enriched uranium and 7 for gaseous diffusion enriched uranium. The normalized CO₂ emissions, in tonnes of CO₂ per GW_eh, ranges from 14 to 33 for the wind systems, 974 for coal, and 10 and 34 for nuclear fission using gas centrifuge and gaseous diffusion enriched uranium, respectively.     

Elastic properties and stability of coexisting 3T and 2M 1 phengite polytypes

The elastic properties of coexisting natural 3T and 2M ₁ phengite samples (Cima Pal, Sesia Zone; Val Savenca; Western Alps, Italy) with similar chemical compositions have been studied by room temperature–high pressure powder diffraction, using synchrotron radiation on the ID9A beam-line at ESRF (Grenoble, France). The P–V curves have been modelled by the Birch–Murnaghan model; a third-order expansion fitted to the experimental data yields for 3T and 2M ₁ K ₀=60.4(±0.7) GPa, K′=5.79(±0.11) at V ₀=703.8851 ų, and K ₀=57.3(±1.0) GPa, K′=6.97(±0.24) at V ₀=938.8815 ų, respectively. The relative stability of 3T vs. 2M ₁ has been explored as a function of pressure and temperature in terms of configuration and deformation contributions to the Gibbs energy, using the elastic properties determined here and other thermodynamic parameters from earlier investigations. The results presented agree with the hypothesis of stability of the 3T polytype in the high pressure regime.     

Energy transfer among Pb, Ce and Mn in fluorescent calcite from Kuerle, Xinjiang, China

Natural calcite from Kuerle, Xinjiang, China, shows orange-red fluorescence when exposed to short-wave ultraviolet (UV) light (Hg 253.7 nm). Photoluminescence (PL) emission and excitation spectra of the calcite are observed at room temperature in detail. The PL emission spectrum under 208 nm excitation consists of three bands: two UV bands at 325 and 355 nm and an orange-red band at 620 nm. The three bands are ascribed to Pb²⁺, Ce³⁺ and Mn²⁺, respectively, as activators. The Pb²⁺ excitation band is observed at 243 nm, and the Ce³⁺ excitation band at 295 nm. The Pb²⁺ excitation band is also observed by monitoring the Ce³⁺ fluorescence, and the Pb²⁺ and Ce³⁺ excitation bands, in addition to six Mn²⁺ excitation bands, are also observed by monitoring the Mn²⁺ fluorescence. These indicate that four types of the energy transfer can occur in calcite through the following processes: (1) Pb²⁺ → Ce³⁺, (2) Pb²⁺ → Mn²⁺, (3) Ce³⁺ → Mn²⁺ and (4) Pb²⁺ → Ce³⁺ → Mn²⁺.     

利用三维地震在戈壁沙漠区解决复杂地质构造问题

在分析戈壁沙漠地区地球物理特征的基础上，针对性的提出了解决煤田地质构造问题的方法，包括三维地震野外施工方法的选取、施工因素的选择、资料处理手段；并以获得的实际地质成果证实三维地震在解决复杂地质构造问题的可行性。     

Influence of Adoptment of Geocentric 3D Coordinate System on Chinese Existent Maps

If a geocentric 3D coordinate system is adopted in China to replace 2D non-geocentric coordinate system, the coordinates of the surface points will be changed accordingly. The influences on the current maps of China, especially the topographic maps, are discussed due to the replacement of the coordinate systems. Taking the replacement of Xi‘an 80 coordinate system by GRS80 for a numerical example, this paper analyzes the changes of latitude, longitude, Gauss plane coordinates of the surface points, as well as the orientation and the length changes between the points on the map, including the changes of map border lines and sheet corner points.     

二维电子地图和三维虚拟场景的互响应

本文提出了基于二维电子地图与三维虚拟场景之间相互响应的思想来克服它们各自的局限性.简要的描述了相互响应的原理、表现形式、实现流程及实现方法.最后提出了一些结论和展望.     

基于IMAGIS的数字小区建模探讨

随着城市化水平的不断提高，对城市的规划管理也提出了很高的要求，数字城市作为数字地球的重要组成部分正是在这一背景下提出的。本文结合适普公司的IMAGIS软件，对城市小区鼍维场景建设中的相关问题进行了探讨，并以遂宁市某街区为例进行了实践。