Intensity of in‐lake processes in floodplain lakes within the Bug River zone of fluvial activity

The paper presents a new approach to calculating the erosion and deposition values of floodplain lake basins, the erosion–deposition index (EDI). The EDI is a sum of the basin geometry indices (BGIs), which can be calculated for a separate cross section of the lake. The distribution of processes within the basin was investigated in two selected floodplain lakes with the use of BGIs. Field research was carried out in the Bug River valley from 1 November 2006 to 31 October 2011. The highest erosion was observed in the lakes located close to the parent river. Deposition processes were observed in lakes with high inflow of groundwater. The results showed that EDI values of 48 out of the 71 floodplain lakes ranged from ?0.2 to 0.2. Spatial distribution of erosion and deposition processes within the lake basins resulted from a velocity of water inflowing or flowing through the basin. This was observed especially in contrafluent–confluent lake. Inflow of rivers water via upstream crevasse occurred later than via downstream one, but energy of flowing water was higher, which favoured erosion of this part of the lake basin. Copyright © 2013 John Wiley & Sons, Ltd.     

Bimodal magmatism of the Tucumã area,Carajás province: U-Pb geochronology,classification and processes

Geological mapping of the Tucumã area has enabled the identification of dike swarms intruded into an Archean basement. The disposition of these dikes is consistent with the well-defined NW-SE trending regional faults, and they can reach up to 20 km in length. They were divided into three main groups: (i) felsic dikes (70% of the dikes), composed exclusively of porphyritic rhyolite with euhedral phenocrysts of quartz and feldspars immersed in an aphyric felsite matrix; (ii) mafic dikes, with restricted occurrence, composed of basaltic andesite and subordinate basalt, with a mineralogical assembly consisting dominantly of plagioclase, clinopyroxene, orthopyroxene and olivine; and (iii) intermediate rocks, represented by andesite and dacite. Dacites are found in outcrops associated with felsic dikes, representing different degrees of hybridization or mixture of mafic and felsic magmas. This is evidenced by a large number of mafic enclaves in the felsic dikes and the frequent presence of embayment textures. SHRIMP U-Pb zircon dating of felsic dikes yielded an age of 1880.9 ± 3.3 Ma. The felsic dikes are peraluminous to slightly metaluminous and akin to A2, ferroan and reduced granites. The intermediate and mafic dikes are metaluminous and belong to the tholeiitic series. Geochemical modeling showed that mafic rocks evolved by pyroxene and plagioclase crystallization, while K-feldspar and biotite are the fractionate phases in felsic magma. A simple binary mixture model was used to determine the origin of intermediate rocks. It indicated that mixing 60% of rhyolite and 40% basaltic andesite melts could have generated the dacitic composition, while the andesite liquid could be produced by mixing of 60% and 40% basaltic andesite and rhyolite melts, respectively. The mixing of basaltic and andesitic magmas probably occurred during ascent and storage in the crust, where andesite dikes are likely produced by a more homogeneous mixture at high depths in the continental crust (mixing), while dacite dikes can be generated in the upper crust at a lower temperature, providing a less efficient mixing process (mingling). The affinities observed between the felsic to intermediate rocks of the Rio Maria and São Felix do Xingu areas and the bimodal magmatism of the Tucumã area reinforce the hypothesis that in the Paleoproterozoic the Carajás province was affected by processes involving thermal perturbations in the upper mantle, mafic underplating, and associated crustal extension or transtension. The 1.88 Ga fissure-controlled A-type magmatism of the Tucumã area was emplaced ∼1.0 to ∼0.65 Ga after stabilization of the Archean crust. Its origin is not related to subduction processes but to the disruption of the supercontinent at the end of the Paleoproterozoic.     

Distribution and relative density of cetaceans in the Hauraki Gulf,New Zealand

Understanding species distributions, and how they change in space and time, is vital when prioritising conservation or management initiatives. We assessed the distribution and density patterns of common dolphins (Delphinus sp.), bottlenose dolphins (Tursiops truncatus) and Bryde’s whales (Balaenoptera edeni) in the Hauraki Gulf, New Zealand. Dedicated boat-based surveys were conducted in the inner Hauraki Gulf (IHG) and off Great Barrier Island (GBI) during 2010–2012. Generalised linear models were used to investigate temporal changes in relative densities and kernel density estimation was implemented to examine spatial trends. Common dolphins were widely distributed during all seasons, with higher densities observed during winter and spring in the IHG but during autumn off GBI. There was inter-annual variation in Bryde’s whale distribution, with high densities recorded off GBI in 2011. Bottlenose dolphins were infrequently sighted in the IHG but regularly encountered off GBI, with the highest densities during spring and summer.     

Copper Speciation in a Collection of Geochemical Reference Materials Using Sequential Extraction and Evaluation of the Validity Using XANES Spectroscopy

Copper speciation in a collection of Japanese geochemical reference materials (JSO‐1, JLk‐1, JSd‐1, ‐2, ‐3 and ‐4, JMs‐1 and JMs‐2) was achieved by sequential extraction and characterised using X‐ray absorption near‐edge structure spectroscopy. In the first step of the extraction, referred to as the acid fraction, between 1% and 20% total Cu within the reference materials was extracted. Such a result is typically accounted for by absorption of Cu onto clay minerals. However, the presence of Cu sulfate (an oxidation product of chalcopyrite) was observed in some of the stream sediments affected by mining activity (JSd‐2 and JSd‐3) instead. Copper was extracted in the reducible fraction (targeting Fe hydroxide and Mn oxide) (2–49% total Cu). Between 2% and 51% Cu was extracted in the oxidised fraction (targeting sulfides and organic matter). X‐ray absorption near‐edge structure spectroscopy clarified that the reducible fraction consisted of Cu bound to Fe hydroxide, whereas the oxidised fraction was a mixture of Cu bound to humic acid (HA) and Cu sulfide. In the oxidisable fraction, chalcopyrite was the predominant species identified in JSd‐2, and Cu bound to HA was the major species identified in JSO‐1 (a soil sample).     

考虑地球曲率影响的重力中间层校正计算及其精度分析

介绍一种考虑地球曲率影响的“球冠模型” 重力中间层校正算法,并通过不同算例对比该算法与以往“圆柱体模型”算法之间的差值。结果表明,其差值的数量级最大可达0.4 mGal。     

Production and Certification of Synthetic Selenium Isotopic Reference Materials

Due to intensive research into selenium isotopes in recent years, the increasing requirement for reliable and comparable measurement results has created a strong demand for selenium isotopic certified reference materials (iCRM) that were previously not available. To address this, eleven selenium iCRMs were developed, including ten synthetic iCRMs (GBW 04447–GBW 04456) and one natural iCRM (GBW 04457). The synthetic iCRMs were prepared with ⁷⁶Se, ⁷⁸Se, ⁸⁰Se and ⁸²Se solutions and a natural selenium solution; the natural iCRM was prepared with highly pure selenium material. The property values of isotope ratios in these iCRMs were certified by calibrated mass spectrometry with a collision cell multi‐collector ICP‐MS. The mass discrimination effect of the instrument was corrected with corresponding ⁷⁸Se/⁷⁶Se isotope mixtures and ⁸²Se/⁷⁶Se isotope mixtures, which were gravimetrically prepared with purified, isotopically enriched selenium materials. Homogeneity and stability tests were performed, and no significant influences were found. The uncertainty of the property values of the iCRMs was evaluated according to the Guide to the Expression of Uncertainty in Measurement (GUM) of ISO/BIPM and ISO Guide 35. The δ^82/76Se value of GBW 04457 relative to NIST SRM 3149 was also calculated. These iCRMs are intended for use in calibration of instruments and evaluation of methods for the determination of selenium isotope ratios.     

俄罗斯-蒙古地学断面地壳模型的地质-地球物理资料综合研究

地学断面是指地壳的垂直剖面,主要通过对地质和地球物理资料的综合分析来揭示构造带的性质及其空间关系。横断面的研究所采用的数据基本包括100 km宽区域地质图、上地壳的地质剖面图、重磁图(沿横断面的重磁剖面图)以及地壳的地震波速度、密度和其他地球物理属性的剖面图。这些数据被用于构建综合的数据剖面图(结果图),以展示各种地球动力学条件下(裂谷、海洋、碰撞带、造山盆地、大陆地台和岩浆弧,包括安第斯岛弧、活动大陆边缘、海沟、弧前和弧后盆地)的特定的岩石组构。本项目的研究目标是根据研究区现存的地质和地球物理数据的综合解释,统一图例,建立研究区深部剖面,以确定地体的空间关系及其在板块构造方面的地球动力学性质。 前人已分别对东西伯利亚南部和蒙古境内的多个地体进行了构造划分,并对它们的地球动力学性质和时空关系进行了分析。研究结果显示该系列地体为早古生代、中晚古生代和晚古生代—早中生代的岛弧和微大陆。此外,研究还识别出了中—晚古生代和晚古生代—早中生代安第斯型活动大陆边缘、晚古生代—早中生代被动大陆边缘和早白垩世裂谷。与岛弧和安第斯型活动大陆边缘相关的岩体被推覆至相邻大陆和微陆块上,部分推覆宽度可达150 km。目前已开展泥盆纪到晚侏罗世时期蒙古-鄂霍次克海地区的古地球动力学重建。 “非地槽”型花岗岩类岩浆作用在板块构造方面找到了直接且合理的解释,其中泥盆纪—石炭纪和二叠纪—三叠纪岩浆作用区域对应于安第斯型活动大陆边缘,中—晚侏罗世岩浆作用则与西伯利亚/蒙古-中国大陆板块碰撞有关。碰撞岩浆作用中亚碱性(地幔)元素的存在及其所在的构造区域在很大程度可以说明蒙古-鄂霍次克海闭合后,巨厚大陆岩石圈下曾经发生过持续的大洋裂谷活动(地幔热点)。在早白垩世时期,大陆裂谷活动影响到了同一时期正在发生的大陆汇聚作用。 西伯利亚南部边界大部分具有安第斯型活动大陆边缘性质,这也是蒙古—鄂霍次克缝合线沿线蛇绿岩数量较少的原因。因为当汇聚大陆一个具有安第斯类型的活动边缘,而另一个具有被动边缘时,前者的大陆地壳会最终逆冲到后者之上,并因此破坏掉先前出露的蛇绿杂岩体。部分被破坏的蛇绿岩块是俯冲带保留下来的海山残余,其可能成为增生-俯冲楔体的混沌复合体的一部分。然而,由于快速俯冲作用,这种楔形体在晚二叠世—早侏罗世的积累并不是西伯利亚活动边缘的典型特征。 沿地学断面综合的地质和地球物理资料分析表明,亚洲大陆是在显生宙时期由部分前寒武纪微陆块构造拼贴而成的。前寒武纪地块间存在不同宽度的已变形且剥蚀强烈的显生宙火山弧,它们也被归类为特定地体。     

围压-孔压改变条件下致密砂岩及泥页岩泊松比变化特征及机制

在围压(外压)或孔压(内压)发生变化的条件下,致密砂岩及泥页岩泊松比的变化特征及机制仍有待厘清.本研究从Terzaghi有效应力理论和国内学者提出的新有效应力概念出发,基于松辽盆地高台子组致密砂岩、青山口组泥页岩三向动、静态泊松比测定结果,剖析了两类岩石泊松比的变化特征及机制.岩石样品三向泊松比变化曲线的分布呈现显著的...     

新冠肺炎疫情对经济全球化的影响分析

新冠肺炎疫情是第二次世界大战以来世界面临的最大危机,给世界带来巨大的冲击,包括人们的心理和生活、经济增长与就业、国家治理及世界治理等。这些影响使很多学者、评论家、大众、企业家乃至政府官员产生了非常悲观的情绪,舆论中不乏经济全球化将终结、全球供应链将大规模调整、世界治理格局将彻底改变等言论。本文通过建立“全球化的三角结构”剖析了经济全球化的动力机制,并结合疫情对世界的主要影响,试图揭示后疫情时代经济全球化的走势。我们认为,资本的“空间出路”、技术的“时空压缩”和国家的开放程度是驱动经济全球化的三个基本力量,这三者的变化及其相互作用结果影响着全球化进程。从动力机制看,全球化是一个没有终点且不断变化的历史过程,它不会倒退,而是波动。过去半个世纪以来,世界各国已经被全球化紧密地联系在一起,相互脱钩的代价极其昂贵,没有国家会选择完全脱钩。所谓的逆全球化现象,是全球化发展过程中世界格局变化及各国应对策略调整的结果。新冠肺炎疫情并不能影响全球化的资本和技术驱动力,但是可能影响国家的开放程度。如果疫情持续时间不是很长,经济全球化将很快会回归原有的发展轨迹,继续进行调整。各国也将继续围绕经济全球化进行斗争、妥协、再斗争,直至形成一个相对稳定的状态。因此,经济全球化可能因为应对疫情而踩下急刹车,甚至暂退半步,但很快将继续前行,向着“包容性全球化”的方向发展。     

Decumbent development: Urban sprawl in the Guwahati Metropolitan Area,India

Urban sprawl has become a global phenomenon as an outcome of growing population and rapid urbanization. Previous studies have addressed the rising incidence of uncontrollable urban development, particularly in peri-urban areas of cities, leading to chronic urban sprawl. The city of Guwahati, a million city in north east India, has expanded significantly in recent years. In this article, the links between population and growth of built-up areas were examined using geo-spatial techniques and remotely sensed datasets. The results indicate that the sprawl has accentuated in recent years. The intensity of land use remained uneven due to marked variations in the distribution of built-up areas, plausibly an outcome of unplanned urban growth. If current trends are anything to go by, future urban sprawl could pose serious threats to the vulnerable eco-sensitive and peri-urban areas of Guwahati. Secondary cities have unfortunately received scant attention in urban policy research, and Guwahati, epitomizes urban woes in a developing country.