Exposure ages from relict lateral moraines overridden by the Fennoscandian ice sheet

Lateral moraines constructed along west to east sloping outlet glaciers from mountain centred, pre-last glacial maximum (LGM) ice fields of limited extent remain largely preserved in the northern Swedish landscape despite overriding by continental ice sheets, most recently during the last glacial. From field evidence, including geomorphological relationships and a detailed weathering profile including a buried soil, we have identified seven such lateral moraines that were overridden by the expansion and growth of the Fennoscandian ice sheet. Cosmogenic ¹⁰Be and ²⁶Al exposure ages of 19 boulders from the crests of these moraines, combined with the field evidence, are correlated to episodes of moraine stabilisation, Pleistocene surface weathering, and glacial overriding. The last deglaciation event dominates the exposure ages, with ¹⁰Be and ²⁶Al data derived from 15 moraine boulders indicating regional deglaciation 9600 ± 200 yr ago. This is the most robust numerical age for the final deglaciation of the Fennoscandian ice sheet. The older apparent exposure ages of the remaining boulders (14,600-26,400 yr) can be explained by cosmogenic nuclide inheritance from previous exposure of the moraine crests during the last glacial cycle. Their potential exposure history, based on local glacial chronologies, indicates that the current moraine morphologies formed at the latest during marine oxygen isotope stage 5. Although numerous deglaciation ages were obtained, this study demonstrates that numerical ages need to be treated with caution and assessed in light of the geomorphological evidence indicating moraines are not necessarily formed by the event that dominates the cosmogenic nuclide data.     

Threshold velocity for wind erosion: the effects of porous fences

Porous fence is a kind of artificial windbreak that has many practical applications. The threshold wind velocities at different distances downwind from porous fences were measured and the corresponding characteristics of particle movement observed to assess their shelter effect. It is found that the fence’s porosity is the key factor that determines the resulting shelter effect. The area near a fence can be typically classified into five regions, each with a different mode of particle movement. Dense fences, and especially solid fences, favor the accumulation of sand upwind of the fences. Fences with porosities of 0.3–0.4 produce the maximum threshold wind velocity; those with porosities of 0.3–0.6 (depending on the fence height) provide the maximum effective shelter distance. It is confirmed that the fence porosities of 0.3–0.4 that have been proposed for practical application in previous research are the most effective for abating wind erosion.     

Real Time Analysis and Forecasting of Strata Caving Behaviour during Longwall Operations

Summary. Discontinuous manual observations and irregular caving characteristics of roof rocks often lead to improper decisions resulting in accidents and production loss. Hence, systematic monitoring of the hanging roof behind the chock shields is necessary for safe and productive mining operations. A real-time application was successfully implemented in an Indian mine for forecasting of hanging roof behaviour to enhance safety and productivity. This paper reports the functioning of real-time TWAP (time weighted average pressure) analysis in the forecasting of hanging roof behaviour in real time.     

Net Energy Payback and CO2 Emissions from Three Midwestern Wind Farms: An Update

This paper updates a life-cycle net energy analysis and carbon dioxide emissions analysis of three Midwestern utility-scale wind systems. Both the Energy Payback Ratio (EPR) and CO₂ analysis results provide useful data for policy discussions regarding an efficient and low-carbon energy mix. The EPR is the amount of electrical energy produced for the lifetime of the power plant divided by the total amount of energy required to procure and transport the materials, build, operate, and decommission the power plants. The CO₂ analysis for each power plant was calculated from the life-cycle energy input data. A previous study also analyzed coal and nuclear fission power plants. At the time of that study, two of the three wind systems had less than a full year of generation data to project the life-cycle energy production. This study updates the analysis of three wind systems with an additional four to eight years of operating data. The EPR for the utility-scale wind systems ranges from a low of 11 for a two-turbine system in Wisconsin to 28 for a 143-turbine system in southwestern Minnesota. The EPR is 11 for coal, 25 for fission with gas centrifuge enriched uranium and 7 for gaseous diffusion enriched uranium. The normalized CO₂ emissions, in tonnes of CO₂ per GW_eh, ranges from 14 to 33 for the wind systems, 974 for coal, and 10 and 34 for nuclear fission using gas centrifuge and gaseous diffusion enriched uranium, respectively.     

北京市区春季燃烧源大气颗粒物的污染水平和影响因素

以大气中PM2.5和PM10为研究对象,于2005-03-13—25共7天的时间内,在中国地质大学(北京)测试楼顶、首钢焦化厂和首钢东门设立3个采样点进行采样监测。结果表明:PM2.5和PM10质量浓度的日变化呈现一定规律性,在不同时段PM2.5和PM10的质量浓度不尽相同,且变化较大,在特定时刻出现峰值,主要受污染源排放和气象因素的控制;PM2.5和PM10质量浓度随气温的升高而降低,这与高温有利于颗粒物扩散、低温容易形成逆温层有关;在一定的相对湿度范围内(以大气中水汽不发生重力沉降为界限),PM2.5和PM10质量浓度与相对湿度呈正相关关系;而当发生降水时,由于水滴的冲刷和附带作用,PM2.5和PM10质量浓度降低;PM2.5和PM10质量浓度与风级呈明显的负相关关系。通过北京市与国内8个省会城市的PM2.5和PM10质量浓度的对比,发现北京市PM2.5和PM10污染比较严重,PM2.5和PM10质量浓度分别超过了1996年中国制定的PM10排放标准和1997年美国EPA制定的PM2.5排放标准。     

WAFS产品中GRIB资料中国区产品评估

为了给使用WAFS产品的用户提供量化参考依据，选取WAFS产品中常用区域和层次的GRIB数据，利用由国家气象中心提供的风、温客观分析网格点资料，与WAFS中同时刻的预报场产品（风、温网格点资料），用均方根误差进行数字化形式分析比较。结果表明：WAFS提供的风、温预报，通常是短时效的风、温预报比长时效的风、温预报更接近客观分析场；低层的预报比高层的预报更接近客观分析场；风的预报以v矢量的预报优于u矢量的预报；风的误差主要来源于u矢量的误差。     

冬季浙闽沿岸水分布的短期变动与风的关系初探

利用1999年7月至2003年5月期间的遥感数据,包括AVHRR海表层温度、QuikSCAT风场和风应力数据,在分析4年内月平均遥感温度场和风场特征与历年现场观测所获得的认识一致的基础上,选取2002年002-008天这一连续晴空的时段,尝试建立简单的沿岸冷水影响面积表征方法,初步探讨了冬季台湾海峡浙闽沿岸水分布的短期变动与风应力之间的关系。结果表明,风是决定冬季台湾海峡海表层温度逐日变动的关键因素,日平均SST与风应力的相关系数R2达到0·90。采用温度法(SST≤17℃)和温度空间距平法(≤-1℃)表征的浙闽沿岸水影响面积的变化趋势基本一致,而且影响面积的逐日变动与风应力显著相关,二者的相关系数R2分别达到0·90和0·91。     

Wind and Wave Data Analysis for the Aegean Sea - Preliminary Results

In this paper, a statistical analysis on wind and wave buoy measurements and wind and wave model forecasts obtained during a two-year period (1999-2001) is presented with reference to four characteristic near-shore sites of the Aegean Sea. The measurements are a main product of the "POSEIDON" system aiming at the monitoring and forecasting of the state of the Greek seas, operated by the National Centre for Marine Research (NCMR). Although the two-year period is rather short for a thorough analysis of the local wind and wave climate, yet the obtained results, presented herein for the first time, reveal some interesting features of the corresponding wave and wind characteristics. Comparisons between the measurements and the forecast results are also performed at the locations under consideration. It is found that (i) wind speeds obtained from the POSEIDON weather forecasting system are, in general, in agreement with the measurements, except for high wind speeds which are systematically underestimated, (ii) the WAM model can successfully follow the monthly and over year trend of the evolution of wind and wave characteristics, but face significant problems for efficient sea-state forecasting. Finally, the overall pattern of the wind/wave climate for the entire Aegean Sea as obtained from the models is presented by means of the spatial distribution of the mean annual wind and sea-state intensity.     

Optimal design of passive energy dissipation systems based on H∞ and H2 performances

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.     

A comparison of tectonic ambient shear stress value in China with that in western USA

Introduction The stress status of the earths crust is closely related to global structure, the direction of plate movement, the drive mechanism of plate, earthquake cause, etc. Therefore the researches of the stress status of the earths crust and the process of dynamic evolution are paid a great attention to by many people around the world (Zoback, Zoback, 1980; Zoback, et al, 1989; Zoback, 1989; Spence, 1997; Fuchs, 1997; Plenefish, Bonjer, 1997; Muller, et al, 1997; XU, et al, 1989; WAN…