Geochronology and geochemistry of eclogites from the Mariánské Lázně Complex,Czech Republic: Implications for Variscan orogenesis

The Mariánské Lázn complex (MLC) is located in the Bohemian Massif along the north-western margin of the Teplá-Barrandian microplate and consists of metagabbro, amphibolite and eclogite, with subordinate amounts of serpentinite, felsic gneiss and calcsilicate rocks. The MLC is interpreted as a metaophiolite complex that marks the suture zone between the Saxothuringian rocks to the north-west and the Teplá-Barrandian microplate to the south-east. Sm-Nd geochronology of garnet-omphacite pairs from two eclogite samples yields ages of 377±7, and 367±4 Ma. Samples of eclogite and amphibolite do not define a whole rock Sm-Nd isochron, even though there is a large range in Sm/Nd ratio, implying that the suite of samples may not be cogenetic. Eclogites do not have correlated _Nd values and initial ⁸⁷Sr/⁸⁶Sr ratios. Five of the eight eclogite samples have high _Nd values (+10.2 to +7.1) consistent with derivation from a MORB-like source, but variable ⁸⁷Sr/⁸⁶Sr ratios (0.7033 to 0.7059) which probably reflect hydrothermal seawater alteration. Three other eclogite samples have lower _Nd values (+ 5.4 to –0.8) and widely variable ⁸⁷Sr/⁸⁶Sr ratios (0.7033 to 0.7096). Such low _Nd values are inconsistent with derivation from a MORB, source and may reflect a subduction or oceanic island basalt component in their source. The MLC is an important petrotectonic element in the Bohemian Massif, providing evidence for Cambro-Ordovician formation of oceanic crust and interaction with seawater, Late Devonian (Frasnian-Famennian) high- and medium-pressure metamorphism related to closure of a Saxothuringian ocean basin, Early Carboniferous (Viséan) thrusting of the Teplá terrane over Saxothuringian rocks and Late Viséan extension.     

Comparison between a radiative wind model for be stars and high angular resolution data from the GI2T interferometer

I present theoretical line profiles and intensity maps from an axi-symmetric radiative wind model from a rapidly rotating Be star. The introduction of a viscosity parameter in the latitude-dependent hydrodynamic code enables us to consider the effects of the viscous force in the azimuthal component of momentum equations (Araújo et al. 1994). Both velocity field and density law derived from the hydrodynamic equations have been used for solving the statistical equilibrium equations. By adopting the Sobolev approximation, we could easily obtain a good estimate of both electronic density and hydrogen level populations throughout the envelope. The numerical calculation was performed for parameters characterisic of the Be star Cassiopeiae.     

TOWARD ESTABLISHING THE CONCEPT OF PHYSICAL URBAN AREA IN CHINA

I.IntroduchollWiulegeOgraphystudiestheterritoria1systemsabouttherelationsbforeenhumanbeingSandthenature[I4],urbanmpaphyfocusesspecificallyonthespatialoopltizationandprocessofurbanterritory,anditsinteraCtionwiti1Otherterritorialsystems.Usually,wedoresearch…     

Using numerical modelling to evaluate tsunami hazard near the Kuril Island

A sequence of computer experiments is used to study questions concerning the tsunami problem as a quantitative estimate of tsunami danger, detailed geographical tsunami classification, determination of the parameters of critical tsunami waves, and the conditions of their development. We call a wave critical, if its impact on the coast is most hazardous.Using the Middle Kuril Island as an example, we present the results of a computer experiment which includes determining the wavefields on the shelf and estimating the effects connected with the deep-water Bussol and Diana Straits.Numerical simulation of tsunami waves of different sources permits the assessment of the extent of tsunami danger in different areas of the coastal zone of Simushir Island, depending on the location of the focus zone and their geometry.The major singularities of the wavefield arise in the zones of the deep-water straits. The distribution of the amplification factors is determined by both the global parameters of the wavefields and the local properties of individual harbours. The results obtained for a particular harbour in the northern part of Simushir Island, formed the basis for the quantitative estimate of tsunami danger for this area.     

预测陕西关中地区需水量的改进GM(1,1)模型

需水量评价与预测是水资源规划与管理一项重要的研究内容。本文采用定额法计算需水量。通过对陕西关中地区需水量要素组成的分析,认为需水量要素属平稳时间序列,且一阶累加生成数据系列满足指数规律,符合灰色预测条件。为了提高GM(1,1)模型的精度,采用一种改变背景值的新方法,即:中心逼近方法。通过精度检验,中心逼近式GM(1,1)模型平均误差百分比、误差平方和分别比传统的GM(1,1)模型提高了0.147和1.579。用中心逼近式GM(1,1)模型预测需水量各要素近期和中长期值,经检验,其中非农业人口、农业人口、耕地面积、工业总产值预测模型满足一级模型,等级为良好。牲畜头数预测模型为不合格模型,分析其原因,主要是因为时间序列数据不完全符合指数规律。通过定额法计算,预计75%保证率时2005年和2010年关中地区工农业需水量分别占总需水量的92.21%和89.75%,生活需水量分别占7%和9.04%。     

Na depletion in modern adakites via melt / rock reaction within the sub-arc mantle

Interaction between slab-derived melt and mantle peridotite and the role of slab melt as a metasomatizing agent in the sub-arc mantle is being increasingly recognized. Adakite, the slab melt erupted on the surface, usually exhibits anomalously high MgO, CaO, Cr and Ni contents that indicate interaction with mantle peridotitite. Here we note that Cenozoic adakites have Na₂O contents below 5.8 wt.% with ∼95% samples lower than 5.0 wt.%, and are generally depleted in this component relative to experimental basalt partial melts (mostly beyond 5.0 wt.% and up to 9.0 wt.% Na₂O) produced under 1.5-3.0 GPa conditions that are most relevant to adakite production. We interpret the adakite Na depletion to be also a consequence of the melt / rock reaction that takes place within the hot mantle wedge. During ascent and reaction with mantle peridotite, primary adakite melts gain mantle components MgO, CaO, Cr and Ni but lose Na₂O, SiO₂ and perhaps K₂O to the mantle, leading to Na-rich mantle metasomatism. Selective assimilation of predominately mantle clinopyroxene, some spinel and minor olivine at high T/P has been considered to be an important process in producing high-Mg adakites from primary low-Mg slab melts [Killian, R., Stern, C. R., 2002. Constraints on the interaction between slab melts and the mantle wedge from adakitic glass in peridotite xenoliths. Eur. J. Mineral. 14, 25-36]. In such a process, Na depletion in the assimilated melt is the result of dilution due to the increase in melt mass. Phase relationships in the reaction system siliceous melt + peridotite and quantitative calculation suggest that assimilation of mantle clinopyroxene, olivine and spinel and fractional crystallization of sodic amphibole and orthopyroxene, under conditions of moderate T/P and increasing melt mass, is also an important process that modifies the composition of adakites and causes the Na depletion.     

Statistical evaluation of methods for the calculation of static formation temperatures in geothermal and oil wells using an extension of the error propagation theory

The feasibility of using the more sophisticated weighted least-squares (WLS) model, as opposed to the traditional ordinary least-squares (OLS), in linear regressions of BHT data to estimate the static formation temperatures (SFT) was investigated. The most commonly used analytical methods (line-source; spherical and radial heat flow; and cylindrical heat source) were applied. Error propagation equations were derived to calculate errors in the time function of each method. These errors were combined with the BHT measurement errors to compute weighting factors for applying the WLS. Intercept uncertainties were estimated for all regressions using sets of synthetic and actual borehole logs taken from geothermal and oil applications. SFT computed with the spherical and radial heat flow method were generally greater than those from the other two methods.     

Stratigraphy and optically stimulated luminescence (OSL) dating of a Quaternary sequence along the Dong Nai River, southern Vietnam

The pre-Holocene Cenozoic sequence outcrops in the terrestrial part of the eastern margin of the Mekong Basin. However, the stratigraphy of the sequence is still unclear. Its detailed stratigraphy and chronology were therefore studied along the Dong Nai River, southern Vietnam, and the lithofacies and the relations among the formations were investigated from the outcrops. The ages of the deposits were determined by using optically stimulated luminescence (OSL) dating.The Ba Mieu Formation was deposited about 176±52 ka during marine isotope stage (MIS) 7–6. The Thu Duc Formation was deposited about 97±27 ka during MIS 5. Both the Ba Mieu and Thu Duc formations are composed of fluvial and tidally influenced coastal deposits. The newly proposed Nhon Trach Formation was originally an eolian (blanket) deposit, but it has been partly reworked by fluvial processes. The Nhon Trach Formation was deposited about 10.9±4.7 ka, in the last part of the Pleistocene to the beginning of the Holocene. The OSL ages for the Ba Mieu, Thu Duc, and Nhon Trach formations are younger than the ages previously assigned to these formations.     

Geochemistry and Origin of Ananai Stratiform Manganese Deposit in the Northern Chichibu Belt, Central Shikoku, Japan

Abstract. Major and trace element contents are reported for Permian manganese ore and associated greenstone from the Ananai manganese deposit in the Northern Chichibu Belt, central Shikoku, Japan. The manganese deposit occurs between greenstone and red chert, or among red chert beds. Chemical compositions of manganese ore are characterized by enrichments in Mn, Ca, P, Co, Ni, Zn, Sr and Ba, and negative Ce and positive Eu anomalies relative to post-Archean average Australian Shale (PAAS). Geochemical features of the manganese ore are similar to those of modern submarine hydrother-mal manganese deposits from volcanic arc or hotspot setting. In addition, geochemical characteristics of the greenstone closely associated with the Ananai manganese deposit are analogous to those of with-in plate alkaline basalt (WPA). Consequently, the Ananai manganese deposit was most likely formed by hydrothermal activity related to hotspot volcanism in the Panthalassa Ocean during the Middle Permian. This is the first report documenting the terrestrially-exposed manganese deposit that was a submarine precipitate at hotspot.     

Heavy metals in freshly deposited sediments of the river Subernarekha, India: an example of lithogenic and anthropogenic effects

Heavy metal distribution patterns in river sediments aid in understanding the exogenic cycling of elements as well as in assessing the effect of anthropogenic influences. In India, the Subernarekha river flows over the Precambrian terrain of the Singhbhum craton in eastern India. The rocks are of an iron ore series and the primary rock types are schist and quartzite. One main tributary, the Kharkhai, flows through granite rocks and subsequently flows through the schist and quartzite layers. The Subernarekha flows through the East Singhbhum district, which is one of India’s industrialised areas known for ore mining, steel production, power generation, cement production and other related activities. Freshly deposited river sediments were collected upstream and downstream the industrial zone. Samples were collected from four locations and analysed in <63-μm sediment fraction for heavy metals including Zn, Pb, Cd and Cu by anodic stripping voltammetry. Enrichment of these elements over and above the local natural concentration level has been calculated and reported. Sediments of the present study are classified by Muller’s geo-accumulation index (I _geo) and vary from element to element and with climatic seasons. During pre-monsoon period the maximum I _geo value for Zn is moderately to highly polluted and for Cu and Pb is moderately polluted, respectively, based on the Muller’s standard. Anthropogenic, lithogenic or cumulative effects of both components are the main reasons for such variations in I _geo values. The basic igneous rock layer through which the river flows or a seasonal rivulet that joins with the main river may be the primary source for lithogenic components.