黄、渤海盐度准三维数值预报模式

黄、渤海盐度的垂直结构具有典型的自模性,而其水平分布又受平流、水平扩散效应及径流等因素的影响。本文根据黄、渤海实测资料拟合了盐度垂直剖面的自模函数,并结合描述表、底层盐度及上均匀层厚度这三个特征量水平分布的方程,形成给出盐度三维结构的准三维模式。在模式中,综合考虑了海面风和热输入的强迫作用以及流场的平流、侧向混和及底层混和影响因素,同时还考虑了径流、蒸发及降水的作用,较客观地反映了盐度的三维分布及其变化的物理过程。试报结果分析表明,模式的功能较好,结果令人满意。     

基于光谱分析的MODIS云检测算法的研究

在总结云、陆地、植被、水体等目标光谱特性以及云和不同目标间光谱差异的基础上,改进了一种下垫面多光谱云检测算法,并采用MODIS影响进行了试验.试验结果表明,此改进方法行之有效.     

Effect of Multipoint Heterogeneity on Nonlinear Transformations for Geological Modeling： Porosity-Permeability Relations Revisited

An analysis of statistical expected values for transformations is performed in this study to quantify the effect of heterogeneity on spatial geological modeling and evaluations. Algebraic transformations are frequently applied to data from logging to allow for the modeling of geological properties. Transformations may be powers, products, and exponential operations which are commonly used in well-known relations (e.g., porosity-permeability transforms). The results of this study show that correct computations must account for residual transformation terms which arise due to lack of independence among heterogeneous geological properties. In the case of an exponential porosity-permeability transform, the values may be positive. This proves that a simple exponential model back-transformed from linear regression underestimates permeability. In the case of transformations involving two or more properties, residual terms may represent the contribution of heterogeneous components which occur when properties vary together, regardless of a pair-wise linear independence. A consequence of power- and product-transform models is that regression equationswithin those transformations need corrections via residual cumulants. A generalization of this result isthat transformations of multivariate spatial attributes require multiple-point random variable relations. This analysis provides practical solutions leading to a methodology for nonlinear modeling using correct back transformations in geology.     

Formation Models and Distribution of Oil and Gas Pools in Tarim Basin,China

This article reports the main formation models and distribution of the oil and gas pools in Tarim basin,China,including (I) occurrence of the found oil and gas pools,(2) main formation models of oil and gas pools,and (3) distribution law of oil/gas pools.Petroleum is distributed widely in the strata of Tarim basin from the Sinian at the bottom to the Neogene at the top.However,the found oil and gas fields are mainly distributed in Shaya (沙雅) uplift,Tazhong (塔中) uplift,and Kuche (库车)depression.This article presents 4 main formation models,namely,early formation and long-term preservation,early formation and late reformation,middle-late multiphase-multisource formation,late single-stage formation.Tarim basin is very rich in petroleum resources.Long-term inherited intrabasinal paleohighs and slope zones are the most favorable areas for accumulation of hydrocarbons,but the types of oil and gas pools are different from area to area.The control of unconformities and faults on hydrocarbon accumulating is prominent in Tarim basin.Preservation conditions are of utmost importance.Formation of some oil and gas pools is the result of reforming and re-accumulating of early accumulated hydrocarbons.     

基础电子地图显示的关键技术

电子地图在走向产业化、实用化的过程中,人们越来越感到电子地图的显示所产生的问题不能被忽视。目前,对电子地图显示缺少系统的研究,特别是从理论、技术和实际应用层面相结合的研究还比较少见。因此,在分析基础电子地图显示存在问题的基础上,以地图制图理论为指导,研究了基础电子地图的显示特点,提出了基础电子地图显示研究的理论框架,并针对基础电子地图自适应变焦显示、可视化表达以及显示风格转换系统的研制等关键问题进行了探讨和实践。     

青藏高原边缘地区晚更新世人类遗存与生存模式

自20世纪80年代在青海小柴旦发现旧石器遗存以来,青藏高原边缘地区已经发现了10余处旧石器时代遗址,年代属晚更新世晚期。这些遗存显示,古人类在距今30ka左右开始尝试向这些高海拔地区扩散,但直至距今15ka以后才有更多的人群迁徙至此。通过对这些遗存分布位置、古环境特征、年代测定和石器技术、组合分析,得以管窥古人类对该地区的开发利用过程,并进而阐释史前人类技术发展、生存模式演变和古环境的耦合关系。     

节水稻基农田作物轮作与灌溉模式需水规律研究

采取田间试验方法,研究了南方丘陵典型季节性干旱区节水稻基农田作物轮作与灌溉模式的需水规律和稻田水分利用率.结果表明,节水稻基农田作物轮茬与灌溉模式通过对水稻和油菜等作物产生的生长调控作用和补偿生效应,使植株蒸腾量、棵间蒸发量及稻田渗漏量大幅降低,各阶段的腾发量、需水强度和需水模系均发生显著变化,形成了稻基农田作物轮茬与灌溉模式新的需水规律.与常规双季模式相比,节水灌溉双季稻模式、水旱轮作双季稻模式、稻油轮作模式的需水强度分别减少了0.76、1.15、0.71 mm/d,渗漏强度分别减少了0.12、0.16、0.19mm/d,水分利用率提高了30.14%、47.95%、17.81%.     

平面约束条件在LIDAR点云滤波中的应用

介绍了一种利用平面约束条件对LIDAR点云数据进行滤波的方法,利用每个数据点的邻域点拟合平面,根据平面约束条件和平面点分类方法得到地面点,最后利用地面点内插该区域的DTM.     

陡坡林区的LIDAR点云滤波方法

提出了基于坡度对陡坡林区LIDAR点云数据滤波的预处理算法,结合迭代最小二乘滤波方法改进了滤波效果,实测数据表明,有效地降低了第一类误差和第二类误差。