Nonlinear numerical simulation on extreme-wave kinematics

A fully nonlinear numerical model based on a time-domain higher-order boundary element method (HOBEM) is founded to simulate the kinematics of extreme waves. In the model, the fully nonlinear free surface boundary conditions are satisfied and a semi-mixed Euler-Lagrange method is used to track free surface; a fourth-order Runga-Kutta technique is adopted to refresh the wave elevation and velocity potential on the free surface at each time step; an image Green function is used in the numerical wave tank so that the integrations on the lateral surfaces and bottom are excluded. The extreme waves are generated by the method of wave focusing. The physical experiments are carried out in a wave flume. On the horizontal velocity of the measured point, numerical solutions agree well with experimental results. The characteristics of the nonlinear extreme-wave kinematics and the velocity distribution are studied here.     

Multivariate analysis of fluorescence and source identification of dissolved organic matter in Jiaozhou Bay, China

Hierarchical clustering analysis and principal component analysis (PCA) methods were used to assess the similarities and dissimilarities of the entire Excitation-emission matrix spectroscopy (EEMs) data sets of samples collected from Jiaozhou Bay, China. The results demonstrate that multivariate analysis facilitates the complex data treatment and spectral sorting processes, and also enhances the probability to reveal otherwise hidden information concerning the chemical characteristics of the dissolved organic matter (DOM). The distribution of different water samples as revealed by multivariate results has been used to track the movement of DOM material in the study area, and the interpretation is supported by the results obtained from the numerical simulation model of substance tracing technique, which show that the substance discharged by Haibo River can be distributed in Jiaozhou Bay.     

基层台站关于温带气旋诱发风暴潮的预报与检验

本文利用地转风计算公式、增水公式和日本数值预报产品相结合的方法,计算由温带气旋诱发渤海湾风暴湖时的增水值,并结合天文湖资料,估算高潮位.应用该预报方法对渤海湾发生的"070304"风暴潮个例进行检验,预报值与实测值基本相当,是基层台站较实用的一种风暴潮预报方法.但此方法是否适用干其它造成风暴湖的影响系统有待于进一步求证.风暴潮的发生与风向、风速关系密切,一般当渤海湾盛行东北风或偏东风,且风向维持时间较长、风速较大时,易造成风暴潮的天气.日本数值预报产品对渤海风向、风速的预报对预报渤海的大风有较好的参考价值.     

COMCOT数值模式的介绍和应用

介绍了一个成熟的海啸数值模式-COMCOT模式.COMCOT模式是一个能够模拟海啸产生、传播和增水全过程的基于浅水波方程的有限差分模型.模型采用多层网格嵌套,根据海啸在不同区域的传播特点和要求,分别选用不同的分辨率和计算设置,从而兼顾了模式的精度和计算效率.利用此模式模拟了2006年12月26日台湾南部7.2级地震产生海啸波的传播情况,结果与两个潮位站的海啸波监测数据相吻合.     

“罗莎”台风环流北部中-β尺度大暴雨成因分析

通过对"罗莎"台风对杭州造成特大暴雨期间的卫星、雷达、高低空常规观测等资料的综合分析,认为"罗莎"台风对杭州造成的特大暴雨是在多种尺度天气系统的相互作用和地形影响下形成的;并细致分析各种尺度天气系统的影响过程和可能影响机制,对今后在同类系统造成强降水的预报中有一定借鉴意义.     

A Lagrangian mean theory on coastal sea circulation with inter-tidal transports Ⅱ. Numerical Experiments

The results of the new concept of coastal sea circulation are demonstrated by numerical simulations for the first time. The numerical experiments in three types of rectangular model seas illustrate the dependence of circulation on tidal phases due to the convectively nonlinear effect which is estimated by a newly defined drift dispersion in-dex. Then, the present theory is applied in the Bohai Sea of China. At the Bohai Straits and the Huanghe River mouth area the circulation direction even reverses owing to different initial tidal phases which shows that the the-ory copes with nonlinearity well. The calculated M2 tide-induced residual circulation shows that a clockwise gyre exists in the center of an anticlockwise gyre in the central Bohai Sea due to the topographic features. In the Bo-hai Gulf the tide induced circulation shows a 3D structure with outflow at the surface and the inflow at the bottom which can partly explains the spread of the Huanghe River fresh water out of the Bohai Gulf and the inflow of the sediment from the Huanghe River.     

黄河口粉质土沉积物侵蚀性动态变化试验研究

通过一系列室内试验,研究了黄河口粉质类沉积物在循环动荷载作用后侵蚀性的变化.在试验中,采用真空预压固结装置制备重塑土样,采用液压伺服土动三轴试验机实现了不同幅值及不同振次的动荷载作用条件,并通过动三轴静态试验及贯入强度测试,测定了动荷载作用后土样强度的变化.通过水槽冲刷试验测试了不同条件的动荷载作用后,土样抗冲刷能力的变化,并进行了临界剪切应力的计算.试验结果表明:对于黄河口粉质类沉积物,动荷载作用后其强度及抗侵蚀性均降低;沉积物强度指标(不排水剪切强度、残余强度、贯入阻力)、侵蚀性指标(起动流速、临界剪切应力、冲刷率)与动荷载幅值、动荷载振次均呈现出较好的线性相关性.     

青藏高原北缘公格尔山地区地形梯度的剖析

本文以青藏高原北缘西昆仑山脉的公格尔山地区为试验区域,基于SRTM-DEM数据,采用线状地形剖面和带状地形剖面的研究方法,对试验区从公格尔山顶到塔里木盆地的地形梯度进行了研究,并探讨了地形梯度与隆升过程之间的关系。研究结果表明:(1)线状地形剖面清晰直观,操作简单;带状剖面法能较好地反映区域的地形起伏状况。若将两种方法联合起来共同进行区域地形研究,则会获得更好效果。(2)从塔里木盆地到公格尔山顶,地形抬升共分3个梯度:分别是从海拔高度2 000m左右上升到约4 500m,从约4 500m上升到将近6 000m,从将近6000m上升到约7500m。地形抬升的不同梯度可能对应着公格尔山晚新生代地貌形成过程的不同隆升过程;而每个抬升梯度的拐点,则对应着不同隆升过程形成海拔高度的分界点。