Tempo-spatial rupture process of the 1997 Mani, Xizang (Tibet), China earthquake of MS=7.9

IntroductionAnearthquakeofMs=7.9occurredinMaul,Xizang(Tibet),Chinaat10:02f55.4(UTC),No')ember8.1997.TheepicenterdeterminedbyChinaNationalSeismographNetwork(CNSN)is87.33"E.3>.26'N,thefocaldepthis40km,andthemagnitudeisMs=7.4.Accordingtothedeterllllnati...     

白山市三道阳岔铁矿床磁铁矿工艺矿物学研究

磁铁矿工艺学研究主要为白山磁铁矿在后期详查,开采,选矿方面,提供科学依据,对其进行了工艺学研究,研究结果表明:矿石中可供回收的主要金属矿物为磁铁矿,其他均达不到综合利用指标。     

太平洋中部微生物与多金属结核的生成关系

作者采用洋底水-岩-微生物相互作用系统的观点首次对太平洋中部洋底多金属结核开展了微生物成矿作用的研究。通过洋底各介质中微生物活动与多金属结核生成机制、成矿物质转化的微生物作用及化学作用对比模拟实验研究、观察和测定系统中成矿物质浓度及环境参数的变化,揭示了成矿组分由微生物活动引起的反应速度和演变方向;从微生物地球化学作用的观点,论证了多金属结核微生物成矿机制和成矿模式;提出了多金属结核微生物成矿阶段和成矿理论。     

Shear Alteration, Mass Transfer and Gold Mineralization: An Example from Jiaodong Ore Deposit Concentrating Area, Shandong, China

Since Ramsay and Graham (1970 ) system atically deliv-ered study results of ductile shear zone,the study on shearzone has been put forward rapidly and has obtained greatachievements.After the“gold- bearing shear zone” type ofmetallogenic model proposed by Bonnemaison(1986 ) ,lots ofstudies showed that large gold- bearing shear zone system,which underwent multi- stage and multi- level tectonic- m inerl-ization evolution,is a complex deformational metam orphic ge-ological body with different d…     

Main technical innovations of Songke Well No.2 Drilling Project

Songke Well No.2, one of the main part of the scientific drilling project in Songliao Basin, which was drilled 7018 m and acquired the part of cores continuously from the Low Cretaceous to the Carboniferous and the Permian from the 2843 m deep, can be considered as the deepest continental drilling project in Asia. Aiming at the features of longer well sections, larger diameters and multiple spud-ins for coring of Songke Well No.2, this project broke through the “coring in small diameter and reaming in large diameter” spud-in drilling-completion procedures which are always used in large-diameter-well coring for continental scientific drilling projects in domestic and overseas and the drilling method of short-single-cylinder roundtrip footage. At the same time, “coring in the same diameter and completing drilling at one single diameter” was achieved at all φ311 mm and φ216 mm coring sections of more than one thousand meters long, high-efficient operation with “drilling long footage with drill tools combined in multi-cylinders” was achieved at deep coring section. Four world drilling records were created which include more than a thousand meters continuous coring at φ311 mm, and the footage per roundtrip footage at φ311 mm, φ216 mm and φ152 mm is all more than 30 m, all of these breakthroughs reduced at least 300 days for this project; moreover, considering the characteristics of formations that the geothermal gradient is high in the drilled sections and the inside-well temperature is over 240°C after drilling completion, a formate-polymer water-based mud system was developed by compounding attapulgite and sodium bentonite and by adding independently developed high-temperature stabilizer, which can provide critical technical support for successful well completion at 7018 m in the super-high-temperature environment It is the first time that the water-based mud is operated at the working temperature higher than 240°C in China; Besides, considering the high-quality requirement on cores imposed by the project, the method “mechanical cored is charge” to discharge core nondestructively on the ground was worked out, and more than 4000 m scatheless cores were discharged out of the drill pipes while maintaining original stratum structures.     

层状地基静压桩贯入过程机理试验

通过在多层软粘土地基中静力压入单桩的室内模型试验,对模型桩在整个沉桩过程中压桩力、桩动端阻力及桩动侧阻力随桩贯入深度的变化情况进行了研究,获得了桩在贯入不同土层分界面时阻力的变化规律以及桩周土体应力的分布特征。并对开口管桩和闭口管桩贯入试验情况进行了比较分析,揭示了不同桩端形式桩在贯入过程中桩动侧摩阻力的发展规律,以及分层土体中开口管桩贯入过程中土塞的变化情况。试验结果表明：在粘性土中沉桩时,压桩阻力主要来自桩端向下穿越土体产生的端阻力,而侧摩阻力较小;由于桩侧水平应力的释放使得同一深度点上的动摩阻力随着桩的下沉表现出不同程度的降低,出现摩擦疲劳。     

Experimental study on strain field evolution around a simulated thrust fault

Earthquakes result from continuous geodynamic processes. A topic of significant interest for the scientific community is to elaborate on the phenomena governing the faulting and fracturing of crustal rocks. Therefore, in this study, uniaxial compressive shear failure experiments were conducted on Fangshan marble rock samples with a prefabricated slot to simulate thrust faulting. The center of each marble plate (105 mm × 80 mm × 5 mm) was engraved with a 30-mm long double-sided nonpenetrating slot (depth: 2 mm, width: 0.5 mm). The deformation and destruction processes of the rock surface were recorded using a high-speed camera. The digital image correlation method was used to calculate the displacement and strain distribution and variation at different loading stages. The accumulative and incremental displacement fields u and v , strain field e_x and e_y, and shear strain e_xy were analyzed. When the loading level reached its ultimate value, the strain field was concentrated around the prefabricated slot. The concentration reached a maximum at the ends of the prefabricated slot. The magnitude of shear strain reached 0.1. This experiment contributes to our understanding of the dynamic process of active faulting.     

丽江7.0级地震前地震分形异常

本提供了丽江７．０级地震前滇西北地震活动空间容量维、关联维、信息熵十分显的异常图像；这些异常是在大震孕震区形成、应变释放加速阶段之后出现的，恰好揭示了源区、近源区大释放前的非线性变化过程。这与１９６５年以来云南及邻区８组大震前地震分形研究的结论完全一致；进一步说明地震活动分形异常对地震孕育的短临阶段具有重要的指示意义。     

Plant drought tolerance trait is the key parameter in improving the modeling of terrestrial transpiration in arid and semi-arid regions

陆面过程蒸腾作用的模拟制约着天气,气候降水预测的精确度.近几十年来,为了更好地描述植被蒸腾的水力约束,陆面过程模式发展了基于植物性状的植物水力胁迫方案.然而,我们对于植物性状在蒸腾模拟中的地位仍然缺乏了解,植物性状对蒸腾的重要性仍需进一步量化.本研究利用Morris方法评估植物性状参数在通用陆面模式植物水力胁迫方案(CoLM-P₅₀HS)中的重要性,针对17种植物性状,筛选出最为重要的:耐旱性状(P₅₀),气孔性状,和光合作用性状.在12个FLUXNET站点中,参数的重要性由归一化敏感度来衡量.P₅₀的重要性随着降水的减少而增加,而气孔性状和光合作用性状的重要性则随着降水的减少而减少.在干旱或半干旱地区,P₅₀比气孔性状和光合作用性状更重要,这意味着当植物经常经历干旱时,水力安全策略比植物生长策略更关键.而耐旱性状的巨大变异性进一步暗示了多种植物水力安全策略的共存.忽视P₅₀的变异性可能会对陆面过程模式蒸腾作用的模拟造成严重误差.因此,为了更好地表示植物水力功能的变异性,需要增加对耐旱性状的观测并耦合到陆面模式中.     

高空急流对一次强沙尘暴过程沙尘传输的影响

使用GRAPES_SDM沙尘暴数值模式,对2011年4月28-30日中国北方强沙尘暴天气进行分析,讨论高空急流在此次过程中对沙尘传输的影响,得出以下结论:（1）GRAPES_SDM沙尘暴模式较好地模拟了此次沙尘暴过程的范围和强沙尘暴中心,整体模拟效果较好;（2）沙尘天气发生时间及移动路径与200 hPa高空急流的加强、移动发展有很好的对应关系;（3）高空强纬向风速的加强能够促使中低层形成垂直环流圈,其下沉支流使高空动量有效下传到近地面,进而在地面形成大风及扬沙和沙尘暴天气,强沙尘暴中心位于此垂直环流圈的下沉支;（4）等熵位涡与高空急流及地面沙尘浓度分布演变有很好的对应关系,等熵位涡位于高空急流北侧,地面沙尘浓度中心位于高空急流出口区、等熵位涡中心西南侧、等值线密集带;高层高值位涡区向下延伸的路径与高空急流北侧纬向风速等值线密集带有非常好的对应关系。本文还通过对高空急流轴线动力、热力结构垂直剖面的分析,探讨了高空急流对大范围沙尘天气影响的可能机制。