A simplified approach for vulnerability assessment in moderate-to-low seismic hazard regions: application to Grenoble (France)

Due to the moderate seismic risks in France, the building vulnerability assessment methods developed for high seismic risk countries could not easily be used here because of their cost and the low-risk perception among the public and officials. A light vulnerability assessment method is proposed and tested in Grenoble (France), based on classes and scores provided in the GNDT method but simplified in terms of visual screening and number of structural parameters used. Compared to the RiskUE method, the damage obtained by our approach shows that 90% of buildings have residuals smaller than 0.2, i.e. one grade of the EMS98 damage scale. A large scale survey is devised and conducted among the inhabitants of Grenoble in order to collect the main structural parameters. By comparing the results from the survey to the historical urbanization of Grenoble and to expert surveys performed in two urban districts, the information useful for the light method of vulnerability assessment can be rapidly collected by non-experts reducing substantially the estimate cost. The average damage is then computed using the GNDT formula considering the probable intensities which could be observed in Grenoble (VII and VIII). The average damage reaches 0.4 in the oldest part of Grenoble mainly made of masonry buildings and 0.2 in reinforced concrete suburbs where reinforced concrete predominates. The results are a relative vulnerability assessment that provides useful initial information for the urban zones of Grenoble where the vulnerability is higher. This method can be used to classify the seismic vulnerability in wide seismic-prone regions to a fair degree of accuracy and at low cost.     

Logic-tree Approach for Probabilistic Tsunami Hazard Analysis and its Applications to the Japanese Coasts

For Probabilistic Tsunami Hazard Analysis (PTHA), we propose a logic-tree approach to construct tsunami hazard curves (relationship between tsunami height and probability of exceedance) and present some examples for Japan for the purpose of quantitative assessments of tsunami risk for important coastal facilities. A hazard curve is obtained by integration over the aleatory uncertainties, and numerous hazard curves are obtained for different branches of logic-tree representing epistemic uncertainty. A PTHA consists of a tsunami source model and coastal tsunami height estimation. We developed the logic-tree models for local tsunami sources around Japan and for distant tsunami sources along the South American subduction zones. Logic-trees were made for tsunami source zones, size and frequency of tsunamigenic earthquakes, fault models, and standard error of estimated tsunami heights. Numerical simulation rather than empirical relation was used for estimating the median tsunami heights. Weights of discrete branches that represent alternative hypotheses and interpretations were determined by the questionnaire survey for tsunami and earthquake experts, whereas those representing the error of estimated value were determined on the basis of historical data. Examples of tsunami hazard curves were illustrated for the coastal sites, and uncertainty in the tsunami hazard was displayed by 5-, 16-, 50-, 84- and 95-percentile and mean hazard curves.     

GIS‐assisted modelling for debris flow hazard assessment based on the events of May 1998 in the area of Sarno,Southern Italy: Part I. Maximum run‐out

Based on the debris flow events that occurred in May 1998 in the area of Sarno, Southern Italy, this paper presents an approach to simulate debris flow maximum run‐out. On the basis of the flow source areas and an average thickness of 1·2 m of the scarps, we estimated debris flow volumes of the order of 10⁴ and 10⁵ m³. Flow mobility ratios (ΔH/L) derived from the x, y, z coordinates of the lower‐most limit of the source areas (i.e. apex of the alluvial fan) and the distal limit of the flows ranged between 0·27 and 0·09. We performed regression analyses that showed a good correlation between the estimated flow volumes and mobility ratios. This paper presents a methodology for predicting maximum run‐out of future debris flow events, based on the developed empirical relationship. We implemented the equation that resulted from the calibration as a set of GIS macros written in Visual Basic for Applications (VBA) and running within ArcGIS. We carried out sensitivity analyses and observed that hazard mapping with this methodology should attempt to delineate hazard zones with a minimum horizontal resolution of 0·4 km. The developed procedure enables the rapid delineation of debris flow maximum extent within reasonable levels of uncertainty, it incorporates sensitivities and it facilitates hazard assessments via graphic user interfaces and with modest computing resources. Copyright © 2007 John Wiley & Sons, Ltd.     

Improved seismic hazard model with application to probabilistic seismic demand analysis

An improved seismic hazard model for use in performance‐based earthquake engineering is presented. The model is an improved approximation from the so‐called ‘power law’ model, which is linear in log–log space. The mathematics of the model and uncertainty incorporation is briefly discussed. Various means of fitting the approximation to hazard data derived from probabilistic seismic hazard analysis are discussed, including the limitations of the model. Based on these ‘exact’ hazard data for major centres in New Zealand, the parameters for the proposed model are calibrated. To illustrate the significance of the proposed model, a performance‐based assessment is conducted on a typical bridge, via probabilistic seismic demand analysis. The new hazard model is compared to the current power law relationship to illustrate its effects on the risk assessment. The propagation of epistemic uncertainty in the seismic hazard is also considered. To allow further use of the model in conceptual calculations, a semi‐analytical method is proposed to calculate the demand hazard in closed form. For the case study shown, the resulting semi‐analytical closed form solution is shown to be significantly more accurate than the analytical closed‐form solution using the power law hazard model, capturing the ‘exact’ numerical integration solution to within 7% accuracy over the entire range of exceedance rate. Copyright © 2007 John Wiley & Sons, Ltd.     

山西榆次地裂缝形变微动态的观测与研究

通过对山西榆次地裂缝及墙体裂缝的动态监测，发现如下特征：地裂缝总体趋势为增大，年速率小于等于1mm/a。东部地裂缝带地裂平均速率为0．6mm/a，且大于西部地裂缝带，地裂有向东南方向（榆次市区）扩展的态势；从曲线形态看，无论是地面测点还是建筑物上的测点，都不同程度地受气温变化和降水的干扰。裂缝与温度的变化呈负相关，与降水的变化呈正相关。从地裂的分布形状、区域形变场特征及新构造运动的角度看，附近的断裂活动与地裂的发展似有一定的关系。     

石河子市多层砖混结构房屋震害概率矩阵的建立

以概率理论为基础，采用震害指数法对石河子市重要建筑物中的多层砖混结构房屋进行抗力计算，通过抽样计算建立了石河子市砖混结构房屋按建筑年代分类的震害概率矩阵，又进一步综合这次普查得到的相关统计数据建立了修正的石河子市砖混结构房屋震害概率矩阵，从而为群体房屋的震害预测提供依据。     

地貌灾害预测预报的基本问题——以泥石流预测预报为例

从地貌灾害的定义入手，阐述了地貌灾害预测预报需要解决的四个基本问题、解决这四个问题的二种途径，以及进行预测预报的四种方法。以泥石流为例，论述了泥石流预测预报的现状及其热点、难点和可能的突破点，以及目前和今后一段时期的切人点和研究重点。综述了国内外对泥石流小尺度空间预测，规模预测，时间预测，包括重现期预测、降雨预测和危险度预测的一系列有实用价值的经验公式及其在应用中存在的问题。阐明了灾害评价和预测预报在灾害学研究中的重要地位。     

Evolutionary properties of stochastic models of earthquake accelerograms: Their dependence on magnitude and distance

An approach to generate artificial earthquakeaccelerograms on hard soil sites is presented. Eachtime-history of accelerations is considered as arealization of a non-stationary gaussian stochasticprocess, with statistical parameters depending onmagnitude and source-to-site distance. In order tolink the values of these parameters for each groundmotion record with the corresponding magnitude andsource-to-site distance, semi-empirical functionalrelations called generalized attenuationfunctions are determined. The set of realground-motion time histories used to obtain thesefunctions correspond to shocks generated at differentsources and recorded at different sites in thevicinity of the southern coast of Mexico. The resultsshow significant dispersion in the parameters of themodel adopted, which reflect that associated with thereal earthquakes included in the sample employed.The problem of conditional simulation of artificialacceleration time histories for prescribed intensitiesis briefly presented, but its detailed study is leftfor a companion paper. The criteria and modelsproposed are applied to generate two families ofartificial acceleration records for recurrenceintervals of 100 and 200 years at a specific sitelocated in the region under study. The results shownin this article correspond to acceleration timehistories recorded on firm ground for earthquakesgenerated at the subduction zone that runs along thesouthern coast of Mexico, and cannot be generalized tocases of earthquakes generated at other sources orrecorded at other types of local conditions. Thismeans that the methods and functional forms presentedhere are applicable to these other cases, but thevalues of the parameters that characterize thosefunctions may differ from those presented here.     

The earthquake sequence of May 1951 at Jucuapa, El Salvador

Three earthquakes that happened over two days in May 1951 caused extensive damage to villages in a small area of eastern El Salvador (Central America). Contemporary hypocentral solutions indicated focal depths, confirmed by re-calculations using available seismic data, of the order of 90 km, suggesting events associated with the subducted Cocos plate. Macroseismic observations strongly indicate that the earthquakes were of very shallow focus and this is supported by wave-form modeling and the appearance of seismograms recorded in Guatemala. A re-evaluation of the location and source characteristics for these events is presented, together with a fault plane solution and additional macroseismic evidence. The implications for seismic hazard and risk assessment in Central America, where shallow earthquakes of moderate magnitude, frequently occurring in clusters, pose the greatest threat to settlements which, like the area affected by these events, are concentrated along the axis of Quaternary volcanoes.