ODP204航次天然气水合物的可能有利储层——浊积层

为了解岩性在天然气水合物分布中的作用, 利用岩矿鉴定、扫描电镜和能谱法对ODP204航次的 4个站位 10个钻孔共计 115个沉积物样品进行分析, 发现沉积物中矿物成分基本相近, 以粘土矿物为主, 含少量以石英为主的陆源碎屑。样品中含有丰富的硅藻和有孔虫等微体化石, 可形成硅藻粘土—硅藻土、有孔虫硅藻土或凝灰质硅质生物粘土。石英碎屑大多呈棱角状, 粒径小、含量少, 同时, 样品中可见透镜体、团块或旋涡状层状结构以及杂乱堆积的斑杂构造。上述特征表明沉积物为含有大量深海或半深海的浊流沉积物或其夹层。由于钻井岩心中有相当部分的天然气水合物样品分布在上述沉积物中, 推断这些浊流沉积物很可能是ODP204航次天然气水合物的有利储层。     

激光剥蚀等离子体质谱分析中激光剥蚀参数对信号响应的影响

探讨了激光剥蚀等离子体质谱固体微区分析中激光剥蚀参数对元素分析信号灵敏度及稳定性的影响。这些参数包括激光功率、脉冲频率、剥蚀孔经、散焦距离、剥蚀方式等。讨论了优化的激光剥蚀等离子体质谱信号采集及数据处理方式。在全质量范围内选用具有代表性的元素作为研究对象,建立了激光剥蚀的一般性特征规律和266nm紫外激光系统的最佳操作条件。在选定的激光剥蚀参数下,大多数被测元素的检出限为22.8~457ng/g,能够满足固体微区分析的要求。     

"嫦娥"卫星绕月飞行轨道的激光测定法

依据地月激光测距的成功实践和对卫星激光定轨的基础研究,提出了用地面对嫦娥卫星作激光测距的方法,高精度地测定嫦娥卫星绕月飞行时的实时在轨位置,论述了多站激光定轨和单站激光定轨的解算数模。     

Combined Digital Photogrammetry and Time-of-Flight Laser Scanning for Monitoring Cliff Evolution

Although cliffs form approximately 75% of the world's coastline, the understanding of the processes through which they evolve remains limited because of a lack of quantitative data on the morphological changes they undergo. In this paper the combination of terrestrial time-of-flight laser scanning with high-resolution digital photogrammetry is examined to generate high-quality data-sets pertaining to the geomorphic processes governing cliff development. The study was undertaken on a section of hard rock cliffs in North Yorkshire, UK, which has been monitored over a 12-month period. High-density, laser-scanned point clouds have been used to produce an accurate representation of these complex surfaces, free from the optical variations that degrade photographic data. These data-sets have been combined with high-resolution photographic monitoring, resampled with the fixed accuracies of the terrestrial laser survey, to generate a new approach to recording the volumetric changes in complex coastal cliffs. This has led to significant improvements in the understanding of the activity patterns of coastal cliffs.     

Spectral Filtering and Classification of Terrestrial Laser Scanner Point Clouds

A method is presented for filtering and classification of terrestrial laser scanner point clouds. The algorithm exploits the four-channel (blue, green, red and near infrared) multispectral imaging capability of some terrestrial scanners using supervised, parametric classification to assign thematic class labels to all scan cloud points. Its principal advantage is that it is a completely data-driven algorithm and is independent of spatial sampling resolution since the processing is performed in four-dimensional spectral feature space. Its application to two data-sets of different spatial extent and spatial and spectral complexity is reported, for which respective overall classification accuracies of 87·0% and 82·0% were achieved. Analysis of the input data with emphasis on the characteristics pertinent to the anticipated outcomes precedes detailed analysis of the classification results and error sources and their causes. Erroneously classified points are attributed to radiometric errors stemming from both detector hardware and physical effects.     

3D characterization of coarse aggregates

A new and accurate characterization method for dimensions, shape and roughness of aggregate particles has been developed. The method is based on the 3D-laser scanning technique and evaluation of coarse-grain aggregate-particle images. Parameters are obtained with either analytical Fourier analysis or geometrical analysis. The results from the two methods are compared with each other as well as with manual measurements. Although the Fourier-based analysis gives about 10% smaller size values, the comparison of the results shows, in general, a good agreement between the different techniques. This new method for analysis of coarse-grain aggregates gives reliable results for both the shape and topographical parameters of particles.     

2002年CT扫描和三维成像学术年会评述

由CT理论与应用研究编辑部和北京信息工程学院主办、有中国体视学学会多位理事和会员参加的“2002年CT扫描和三维成像研讨会（CT科技学术年会）”于2002年10月18－20日，在北京大学逸夫苑理科楼学术报告厅举行。中国体视学学会副理事长刘国权教授出席致辞，对于这次CT科技年会的召开表示祝贺，并介绍了2003年在美国圣迭戈和北京将要召开第11届国际体视学会大会的有关情况，希望有关专家准备论文出席，来自全国各地48位专家，教授出席了会议，本次会议涉及CT理论、计算方法和软件及硬件技术；医学CT扫描成像和疾病诊断；工业CT和三维成像：地球层析和工程CT。美国爱荷华大学王革教授，纽约罗彻斯特大学宁若拉教授专程到会，分别做了精彩的特邀主题报告：显微CT的锥束重建新方法和近年来在这方面的进展和展望”，“锥光束三维CT技术在美国的过去、现在和未来”“国内专家也报告了前沿研究的新成果，在会前，CT理论与应用研究编辑部，根据收到的论文和摘要汇编和印制了专集，在会议最后一天，召开了“CT理论与应用研究”期刊编委会，传达了中国科协对于办好科技期刊的新要求，会议开得很成功。     

图像处理技术在地质灾害监测中的应用

三维激光微位移监测技术是一种对地质灾害进行长期监测的新方法。该技术用激光作为光源，用CCD摄像器作为镜头，通过图象采集卡把视频信号采入计算机中，用与该仪器配套的专门软件对采集到的光斑图像进行处理，计算出光斑的三维中心坐标值，把该值和原点坐标值进行比较，就可以算出灾害体滑动的距离。该系统可以对灾害体进行长期、非接触监测，监测时间、监测频率可以任意设定。文章概括介绍该监测的原理，各个组成部分，重点介绍软件部分，即采集的视频信号进入计算机后的图像处理过程和数据库结构。该监测系统已在三块地区试运行了3个月，效果较好。     

声波扫描成像在灾害防治及环境保护中的应用

利用超声波扫描成像测井技术，在地质灾害的预防与环境保护中可以检测由于采矿而形成的冒落带、裂隙带、离层带、洞穴及软弱层的存在状况及部位，测定基岩风化蚀变程度及深度，在地质灾害与环境保护的治理时可以监测治理的质量，提供了直观精确可靠的基础资料。     

机载激光测深中的波浪改正技术

基于我国新研制的机载激光测深系统基本配置，提出了3种可供选择的波浪改正计算方案(也称为深度值归算方案)，具体分析了3种方案的适用条件和应用范围，并从理论上对3种改正模型的计算精度进行了估算。