Microwave-assisted extraction of organochlorine pesticides from sediments and determination by gas chromatograph with electron capture detection

A simple and rapid procedure to extract organochlorine pesticides （OCPs） from sediments by means of microwave energy is proposed. Sediment samples were irradiated with microwaves in a closed vessel system while immersed in hexane-acetone （1 ： 1, v/v）. The sample extracts were cleaned up using solid phase extraction with Florisil as adsorbent. Pesticides were eluted with hexane-ethyl acetate （80 ： 20, v/v） and determined by gas chromatographic separation with electron capture detection. Three oven programs were assayed with two different solvent mixtures in order to achieve adequate experimental conditions for the complete extraction of organochlorine pesticides from the matrix. Different variables such as the composition of extraction solvent,     

Speciation analysis and significance of ecological geochemistry

Different species of one element have different activities, so it has different effects on environment and human health. To analyze qualitatively and quantitatively the speciation of a special element in sample, which is the important basis for appraising the toxicity and studying the rule of transfer and translation of elements. Since the 1970＇s, the scheme of sequential extraction has already been used at many laboratories both at home and abroard, to get the information about heavy metals＇ activity in polluted soils. Because this method has the experimental nature, many schemes of problem has taken place, the absence of consistency of these sequential extraction have been formed. Thus the complexity of the schemes, the lack of selectivity of reagent, the lack of quality control, the result mainly related to the extraction scheme used, and so on. In the face of these problems, the study of experimental methods of sequential extraction on three different soils, sediment in Dongting Lake, soil in Jiangsu Province and loess in Shanxi Province was made. Reference materials of heavy metal speciation following sequential extraction in soil and sediment had been developed. Nowadays two kinds of sequential extraction methods which are widely used are BCR （three steps） and improved Tessier methods （seven steps）. Based on three steps of BCR, water-soluble speciation and the residual speciation were increased in our research. BCR701 was determined eight times at different laboratories using BCR three steps. The results showed that determined data obtained eight times were identical to the standard value, and it is indicated that this method has good reproducibility. The stability and homogeneity experiments indicated that the preparation of three types of candidates accorded with our requirements. Eight laboratories had afforded the determined values of 12 heavy metal elements （Cu, Pb, Zn, Mn, Co, Ni, Cd, Cr, Mo, As, Sb, Hg, Se et al.） using BCR three steps. Also, these three candidates afforded the determined values by seven steps, and 12 laboratories had participated.     

Assessment of mercury mobility and bioavailability by fractionation method in sediments from coastal zone inundated by the 26 December 2004 tsunami in Thailand

The 26 December 2004 tsunami covered significant portion of a coastal zone with a blanket of potentially contaminated sediments. In this report are presented results on mercury concentrations in sediments deposited by the tsunami in a coastal zone of Thailand. Since the total mercury concentrations are insufficient to assess mercury mobility and bioavailability in sediment, its fractionation was applied. Sediments were sampled within 50 days after the event and analyzed by sequential extraction method. The procedure of sequential extraction involved five subsequent stages performed with solutions of chloroform, deionized water, 0.5 M HCl, 0.2 M NaOH, and aqua regia. The mean concentration of total mercury in sediments was 119 ± 50 ng g⁻¹ dry mass (range 66–230). The fractionation revealed that mercury is mainly bound to the least bioavailable sulphides 75 ± 6% (range 62–86), organomercury compounds 14 ± 7% (range 4–26), and humic matter 9 ± 7% (range 1–27). The lowest contributions bring fractions of water-soluble mercury 0.8 ± 1.0% (range 0.1–3.6) and acid soluble mercury 0.9 ± 0.5% (range 0.2–2.1). Although, the total mercury content is similar in a reference sample and in the tsunami sediments, the highly toxic organomercury fraction contribution is higher in the latter. The results were compared with chemical and sedimentological properties of the sediments but no significant correlations were obtained between them.     

Distribution of cadmium, chromium, copper, lead and zinc in marine sediments in Hong Kong waters

Partitioning of heavy metals (Cd, Cr, Cu, Pb, Zn) in marine sediments collected from various sites in Hong Kong waters were determined using sequential extraction method. Sediments from Kellette Bank, located in Victoria Harbour, had higher metal concentrations especially Cu and Zn than most other sites. Slightly over 20% of total Cu and Cr existed as readily available forms in Peng Chau and Kellette Bank. At most sampling sites, over 15% of the Cu existed as the exchangeable form indicating that Cu could be readily released into the aqueous phase from sediments. A significantly higher percentage of Pb and Zn was associated with the three non-residual fractions. Hence, there is a greater environmental concern for remobilization of Pb and Zn compared with Cr. The high amount of residual Cd (>50%) and the relatively lower Cd content indicate that little environmental concern is warranted for the remobilization of Cd. Distribution of metals in sediments collected from different depth at Kellette Bank shows that metal concentrations decreased with profile depth. The levels of Pb and Zn associated with the two readily available fractions increased sharply in the surface sediment. These metals represented the pollutants, which were introduced into the area in the mid-eighties through early nineties as a result of rapid economic and industrial development in the territory. As significant portions of these metals were bound to the readily available phases in the surface sediments, metal remobilization could be a concern. An erratum to this article can be found at     

Impact of Flood Disasters on Taiwan in the Last Quarter Century

The increasing natural disasters, especially floods during the last quarter century, are raising the economic losses in Taiwan. The most severe hazard in Taiwan is flooding induced by typhoons and storms in summer and autumn. By comparing the rivers around the world, the ones in Taiwan have the steepest slopes, the largest discharge per unit drainage area, and the shortest time of concentrations. Rapid urbanization without proper land uses managements usually worsen the flood problems. Consequently, flood hazards mitigation has become the most essential task for Taiwan to deal with. Although the government keeps improving flood defense structures, the flood damage grows continuously. In this article, possible flood mitigation strategies are identified for coping with complex environmental and social decisions with flood risk involved.     

Climatic characteristics of summer high temperature and assessment methods in the large cities of North China

Based on the high temperature data of June to August in 1961-2000 in North China, the high temperature weather processes are investigated, and a more complete data set for severe high temperature processes is created. The climatic characteristics of adverse high temperature weather in Beijing, Tianjin, Shijiazhuang, Jinan and Taiyuan are analyzed respectively. The major features of the East-Asia Subtropical High and Transformed Continental High are discussed. The outcomes indicate that the influence of both East Asia Subtropical High and Transformed Continental High on these weather events varies, by a larger margin, from one city to another over North China and they are also closely related to the relative humidity. It is found that the behaviours of East-Asia Subtropical High and Transformed Continental High are the major important systems that give rise to the summer high temperature weather over the region. Based on these findings, the 5-day, 10-day and monthly assessment models for such high impact events have been developed. The assessment outcomes prove to be useful in assessing severe high-temperature events in major cities of North China.     

RACIALIZED TOPOGRAPHIES: ALTITUDE AND RACE IN SOUTHERN CITIES*

ABSTRACT. This study examines altitudinal residential segregation by race in 146 cities in the U.S. South. It begins by embedding the topic in recent theorizations of the social construction of nature, the geography of race, and environmental justice. Second, it focuses on how housing markets, particularly in the South, tend to segregate minorities in low‐lying, flood‐prone, and amenity‐poor segments of urban areas. It tests empirically the hypothesis that blacks are disproportionately concentrated in lower‐altitude areas using gis to correlate race and elevation by digital elevation‐model block group within each city in 1990 and 2000. The statistical results confirm the suspected trend. A map of coefficients indicates strong positive associations in cities in the interior South‐where the hypothesis is confirmed‐and an inverse relationship near the coast, where whites dominate higher‐valued coastal properties. Selected city case studies demonstrate these relationships connecting the broad dynamics of racial segregation to the particularities of individual places.     

Branding the design metropole: the case of Montréal, Canada

As part of a broader process of inter-urban competition, city governments have increasingly sought to 'position' themselves as centres of creativity. In these branding initiatives, culture is viewed as a tool of urban regeneration and economic development. Our paper examines the case of Commerce Design Montréal, an annual design competition run by the City of Montréal, which aims to brand Montréal as a centre of design. Commerce Design Montréal is an example of a 'fast' policy initiated by the state, but carried out by business owners and citizens. As such, it represents a downloading of the responsibility for economic development to the private or individual scale and adopts only a partial view of the varied actors and uses that are implicated in the design process. The paper considers the opportunities and challenges that this model presents for promoting design as a form of urban regeneration in a neo-liberal context.     

Historical Auckland on foot

Abstract:  This paper discusses three walking tour guides prepared for the 12th International Conference of Historical Geographers. It argues that the guides are innovative in terms of format, content and ironic sensibility. It construes them as devices for re-imagining Auckland's urban heritage.     

Deformability characteristics of brazilian laterites

This paper summarizes the resilient and permanent deformation characteristics of laterite gravels, determined by cyclic loading in triaxial tests of compacted specimens. A study of laterite pavements was carried out on eight paved road sections in the state of Mato Grosso. Also reported is the influence of fine sand admixture, specimen size and soaking in two laterite samples from Roraima and Rondônia in the North of Brazil. The experimental relationships of resilient moduli against applied stresses are interpreted empirically for models what may be incorporated in a structural analysis of full depth of laterite pavement.