无锡梅雨期湿沉降综合分析

利用2008—2014年梅雨期间酸雨观测资料及2014年6月16—27日降水个例加密采样资料,结合大气污染物资料分析了近7 a无锡梅雨期酸雨特征,研究降水过程中空气污染物、p H值、电导率的变化及降水对污染物的清除作用。结果表明:无锡市梅雨期酸雨年平均p H值呈现逐年递增趋势。降水过程中,颗粒物质量浓度显著降低;气体浓度变化受其自身日变化及排放源影响大于雨水的清除作用;样品的p H值、K值每个过程变化并不一致,K值变化与颗粒物质量浓度变化大致保持一致。降水、风对颗粒物质量浓度影响大于对气体浓度的影响。长时间连续降水时,降水对颗粒污染物的清除存在极限。小时雨量在0~0.5 mm时,降水对颗粒物浓度做负清除,其值反而略有增加;小时雨量在0.6~5.0 mm时,降水对颗粒物质量浓度做正清除;小时雨量达到5.1 mm及以上时,对PM_(2.5)和PM_(2.5-10)做正清除,对PM_(10)做负清除。降水对SO_2有稀释清除作用;对NO_2的稀释作用取决于其开始浓度值;对CO、O_3的清除作用不显著。     

基于规则格网的DEM插值实验

通过地形建模,将6个地形隶属函数按照101×101,112×112,126×126,144×144,168×168,201×201,257×257 7种格网密度生成6种局部地形单元的规则格网DEM;使用反距离加权(IDW)等7种插值算法,将前6种格网密度下的DEM插值成257×257规格;从原始257×257DEM中随机抽取检查点计算残差,并对残差中误差进行分析。通过分组插值实验,运用控制变量法、方差分析等方法研究地貌类型、采样密度和插值算法对DEM插值精度的影响。     

FD-600全液压动力头反循环连续取样钻机研制与应用

文章结合国内外CSR取心技术的现状和所生产钻机的特点,为满足国内对空气反循环连续取样（心）、冲击回转、定向钻进等多种高效钻探工艺对钻机的需要,从钻机整体结构设计、整体布局进行详细考量,采用质量可靠的液压件、动力机等外购件,摒弃传统钻机设计周期长、动力小、机械化程度低、对地形和钻探工艺适应性低等特点,研制出了一台高效、可靠、机械化程度较高的FD-600型全液压动力头式反循环取样钻机。在3次野外生产试验中充分体现出了优越性,可满足砂金勘探、工程施工等取心钻探的要求。     

黑龙江省浅覆盖区地物化特征与找矿标志——以黑河市340高地金矿化区为例

黑龙江省黑河市340高地金矿点大地构造上位于兴安地块东北缘,多宝山Cu-Au-Mo-W-Fe成矿亚带内,其地貌为浅覆盖区,找矿较为困难。本文采用浅钻技术取样,对研究区进行基岩填图,圈定出以硅化为中心、青磐岩化为外围的蚀变矿化带。对基岩样品进行岩石地球化学分析,通过主成分分析,确定有6个主成分特征值大于1,其中第二主成分与金元素关系密切,是研究区有效的找矿标志。高精度磁测结果显示区内构造以NNW向为主,且其线性低值异常或与蚀变引起的退磁有关。对区内的地物化异常进行工程查证,发现金矿点1处,圈定预测靶区1处。     

基于MATLAB的基本矩阵随机采样鲁棒估计

基本矩阵的估算可以分为线性算法、非线性优化迭代算法、鲁棒估计算法三大类,而以鲁棒估计效率、效果最为突出,但是实现比较复杂。本文通过数码相机获取的两张未标定照片,采样互相关系数法和RANSAC算法,在MATLAB中实现了基本矩阵的自动拟合,实验表明拟合精度较高、速度快,为下一步三维场景的自动重建和量测奠定了基础。     

地下管线普查产品的检验

随着城市地下管线在城市管理、规划及建设发展过程中重要性的逐渐体现,越来越多的城市开展了地下管线普查,但其质量检验与质量评定方法却相对滞后,本文结合实例阐述了地下管线普查产品的检验及质量评定方法,供大家参考。     

碳氮稳定同位素比值在潮间带大型底栖动物组织间差异性研究

近年来,稳定同位素技术已被广泛应用于食物网研究中。然而,生物样品取样部位对食物网构建的影响的研究相对少见。大型底栖动物作为潮间带食物网的重要组成部分,在食物网研究中有必要对其采样部位进行统一,以增加研究结果的准确性及可比较性。本研究选取黄河三角洲和烟台潮间带10种代表性的大型底栖动物,比较δ13C和δ15N在不同采样部位中的差异。结果显示,对于大多数底栖动物而言,采样部位将直接影响到δ13C和δ15N的测定结果。当底栖动物作为摄食者,需分析其食性和营养级时,应统一采用肌肉组织,如贝类的闭壳肌或足部肌肉,蟹类的鳌足肌肉,鱼类的背部肌肉;当底栖动物作为被摄食者,需分析次级消费者的食性和营养级时,除多毛类采用去除消化道内容物的体壁外,其他种类应选取整体（难以被消化的组织除外）,如贝类的软体部,蟹类肌肉与鳃等的混合组织。     

Impact of different sampling rates on precise point positioning performance using online processing service

In this study, the effect of different sampling rates (i.e. observation recording interval) on the Precise Point Positioning (PPP) solutions in terms of accurac...     

High resolution micromill sampling for analysis of fish otoliths by ICP-MS: effects of sampling and specimen preparation on trace element fingerprints

Otoliths are calcified structures in the head of fish that record environmental information about fish's life history. Gathering the elemental information from the core of an otolith corresponding to the juvenile period of fish's life is critical to discriminate the adult fish to their natal habitats reliably. A high resolution micromill has been used to isolate the otolith core from a whole otolith for elemental analysis. The effects of micromilling procedures (e.g., sectioning, embedding and drilling) on contamination to otolith trace element levels were examined using paired blackfin tuna (Thunnus atlanticus) otoliths. Otoliths were decontaminated by dilute hydrogen peroxide and nitric acid throughout to remove surface contamination. A preconcentration procedure was used to determine the trace elements from the small core material by ICP-MS. It was found that micromilling procedures introduce significant contamination to otoliths, especially for Al, Cu, Pb and Zn. The sectioning procedure caused significant contamination for Co and Cu, while the embedding procedure resulted in contamination for nearly all trace elements (Al, Cd, Co, Cu, Ga, Mn, Ni, Pb, V and Zn). The combined sectioning, embedding and drilling procedure also resulted in contamination for most trace elements. Despite the contamination across all procedural steps, the decontamination procedure effectively removed the surface contamination with the exception of Pb and Zn. Bias (e.g., residual contamination) on Pb was small in comparison to overall concentration of Pb expected to occur in fish otoliths, therefore, its effect may be minor in discriminating individuals. Bias on Zn was larger that could limit its application in discriminating individuals.     

The role of water mass dynamics in controlling bacterial abundance and production in the middle Adriatic Sea

Month-to-month fluctuations in the abundance of bacteria and heterotrophic nanoflagellates (HNF) and bacterial production, as well as various chemical (nutrients, oxygen) and physical (salinity, temperature) parameters were analysed at a station located in the open middle Adriatic Sea during one decade (1997-2006). Being influenced by both coastal waters and open Adriatic circulation in the surface layer, and by the deep Adriatic water masses in the deep layers (100 m), this station is quite suitable for detecting the environmental changes occurring in the open Adriatic Sea with respect to the circulation of its water masses and their long-term changes and anomalies. Multivariate methods were used to identify seasonal and inter-annual changes of the investigated parameters, associating observed changes to the changes in Adriatic water masses and circulation regimes. The analyses showed that bacterial abundance and production were controlled by different water mass dynamics during 1997-2001 compared to 2002-2006 period, particularly noticeable in different seasonal patterns of biological parameters. The interplay between North Adriatic Dense Water (NAdDW) and Levantine Intermediate Water (LIW) resulted in a change in the available nutrients (NAdDW is poor in orthophosphates), and as a consequence different bacterial abundance and production. A few periods were examined in detail, such as 2004, when LIW inflow was particularly strong and was accompanied by an increase of bacterial and HNF abundances, as well as of bacterial production.