常州市数字化测绘工程及GIS建库概述

数字化地形图和地籍图是城市规划、建设和管理及国土资源管理的重要基础资料．也是开展数字城市和信息化建设的最基础平台。通过对系统总体结构的设计和应用成果介绍，分析了目前基础地理数据生产、管理和应用的现状，介绍了基于GIS的常州市数字化地形图、地籍图测绘工程总体目标及基础地理信息系统总体设计．并概述了整个数字化测绘工程的实施过程和特点。     

一体化基础地形地籍数据库的设计思想

结合某地市级一体化基础地形地籍建设工程，主要介绍了一体化基础地形籍数据库的总体设计思想．对几个值得特别注意的关键技术问题进行了探讨，并给出了基本解决方法。     

Development of a soil moisture‐based distributed hydrologic model for determining hydrologically based critical source areas

A simple grid cell‐based distributed hydrologic model was developed to provide spatial information on hydrologic components for determining hydrologically based critical source areas. The model represents the critical process (soil moisture variation) to run‐off generation accounting for both local and global water balance. In this way, it simulates both infiltration excess run‐off and saturation excess run‐off. The model was tested by multisite and multivariable evaluation on the 50‐km² Little River Experimental Watershed I in Georgia, U.S. and 2 smaller nested subwatersheds. Water balance, hydrograph, and soil moisture were simulated and compared to observed data. For streamflow calibration, the daily Nash‐Sutcliffe coefficient was 0.78 at the watershed outlet and 0.56 and 0.75 at the 2 nested subwatersheds. For the validation period, the Nash‐Sutcliffe coefficients were 0.79 at the watershed outlet and 0.85 and 0.83 at the 2 subwatersheds. The per cent bias was less than 15% for all sites. For soil moisture, the model also predicted the rising and declining trends at 4 of the 5 measurement sites. The spatial distribution of surface run‐off simulated by the model was mainly controlled by local characteristics (precipitation, soil properties, and land cover) on dry days and by global watershed characteristics (relative position within the watershed and hydrologic connectivity) on wet days when saturation excess run‐off was simulated. The spatial details of run‐off generation and travel time along flow paths provided by the model are helpful for watershed managers to further identify critical source areas of non‐point source pollution and develop best management practices.     

A smoothed particle hydrodynamics modelling of soil–water mixing and resulting changes in average strength

Soil–water interaction is a pivotal process in many underwater geohazards such as underwater landslides where soil sediments gradually evolve into turbidity currents after interactions with ambient water. Due to the large deformations, multiphase interactions and phase changes this involves, investigations from numerical modelling of the transition process have been limited so far. This study explores a simple numerical replication of such soil–water mixing with respect to changes in average strength using smoothed particle hydrodynamics (SPH). A uniform viscoplastic model is used for both the solid-like and fluid-like SPH particles. The proposed numerical solution scheme is verified by single-phase dam break tests and multiphase simple shear tests. SPH combinations of solid-like and fluid-like particles can replicate the clay–water mixture as long as the liquidity index of the solid-like particles is larger than unity. The proposed numerical scheme is shown to capture key features of an underwater landslide such as hydroplaning, water entrainment and wave generation and thus shows promise as a tool to simulate the whole process of subaquatic geohazards involving solid–fluid transition during mass transport.     

Piecewise prediction model for watershed‐scale erosion and sediment yield of individual rainfall events on the Loess Plateau,China

Establishing a universal watershed‐scale erosion and sediment yield prediction model represents a frontier field in erosion and soil/water conservation. The research presented here was conducted on the Chabagou watershed, which is located in the first sub‐region of the hill‐gully area of the Loess Plateau, China. A back‐propagation artificial neural model for watershed‐scale erosion and sediment yield was established, with the accuracy of the model, then compared with that of multiple linear regression. The sensitivity degree of various factors to erosion and sediment yield was quantitatively analysed using the default factor test. On the basis of the sensitive factors and the fractal information dimension, the piecewise prediction model for erosion and sediment yield of individual rainfall events was established and further verified. The results revealed the back‐propagation artificial neural network model to perform better than the multiple linear regression model in terms of predicting the erosion modulus, with the former able to effectively characterize dynamic changes in sediment yield under comprehensive factor conditions. The sensitivity of runoff erosion power and runoff depth to the erosion and sediment yield associated with individual rainfall events was found to be related to the complexity of surface topography. The characteristics of such a hydrological response are thus closely related to topography. When the fractal information dimension is greater than the topographic threshold, the accuracy of prediction using runoff erosion power is higher than that of using runoff depth. In contrast, when the fractal information dimension is smaller than the topographic threshold, the accuracy of prediction using runoff depth is higher than that of using runoff erosion power. The developed piecewise prediction model for watershed‐scale erosion and sediment yield of individual rainfall events, which introduces runoff erosion power and runoff depth using the fractal information dimension as a boundary, can be considered feasible and reliable and has a high prediction accuracy. Copyright © 2013 John Wiley & Sons, Ltd.     

Jet instability and the stabilizing effect of topography on jets in two-layer rotating systems

Abstract

Laboratory experiments concerning azimuthal jets in two-layer rotating systems in the absence and presence of bottom topography aligned along the jets have been conducted. The jets were forced by the selective withdrawal of fluid from the upper layer of a two-fluid system contained in a circular dishpan geometry. The principal parameters measured in the experiments were the jet Rossby number, Ro, and a stratification parameter F = r ₁/(λ₁λ₂)^1/2 where r ₁ is the radius of the circular disc used for the selective withdrawal (i.e., r ₁ is the approximate radius of curvature of the jet) and λ₁,λ₂ are the internal Rossby radii of deformation in the upper and lower fluids, respectively.

The no-topography experiments show that for a sufficiently small F, the particular value depending on Ro, the jet is stable for the duration of the experiment. For sufficiently large F, again as a function of Ro, the jet becomes unstable, exhibiting horizontal wave disturbances from modes three to seven. An Ro against F flow regime diagram is presented.

Experiments are then conducted in the presence of a bottom topography having constant cross-section and extending around a mid-radius of the dishpan. The axis of the topography is in the vicinity of the jet axis forced in the no-topography experiments and the crest of the topography is in the vicinity of the interface between the two fluids (i.e., the front associated with the jet). The experiments show that in all cases investigated the jet tends to be stabilized by the bottom topography. Experiments with the topography in place, but with the interface between the fluids being above the topography crest, are shown to be unstable but more irregular than their no-topography counterparts.

Various quantitative measurements of the jet are presented. It is shown, for example, that the jet Rossby number defined in terms of the fluid withdrawal rate from the tank. Q, can be well correlated with a dimensionless vorticity gradient, V_G , across the upper layer jet. This allows for an assessment of the stability characteristics of a jet based on a knowledge of V_G (which can be estimated given a jet profile) and F.     

基于地性线分级的DEM信息量计算方法研究

主要对基于DEM提取的地性线进行信息量的定量分析,探讨地性线的信息量与分辨率、地形单元的关系。这个过程中首先利用河网的自相似理论研究与当前DEM所代表的地貌详细程度相适宜的地性线提取的阈值区间,并讨论此阈值下地性线的分级,以此为基础通过以该分级为权重进行DEM地形信息量的计算。实践证明,这种顾及地性线等级的DEM信息量计算方法能较准确地反映地性线的分布规律和不同等级的要素造成的信息量度量差异。     

车载移动测量系统应用于城市大比例尺地形图更新

将车载移动测量系统与城市大比例尺数字地形图测图相结合,成功地将车载移动测量系统运用于城市大比例尺测图更新应用中。通过在测区内布设靶标控制点,对比靶标的点云量算坐标与全站仪实测实际坐标,统计分析车载移动测量系统的测图精度。实验结果表明,车载移动测量系统能够满足城市大比例尺地形图测图要求。     

基于等高线隔断线确定DEM适宜分辨率的方法研究

分辨率是等高线数据插值生成格网DEM数据过程中需要考虑的一个重要参数,适宜的分辨率既能将等高线高程信息尽可能保留,又不会因插值造成数据冗余及误差。基于对格网DEM生成方式的理解,提出了等高线隔断线的相关概念,分析了基于地形图矢量化的等高线数据插值生成格网DEM数据,由不同长度等高线隔断线频率统计来确定格网适宜分辨率参考值的方法。同时,不同长度等高线隔断线的长度与其频率相乘得到标准长度,以及等高线隔断线中心点生成的密度分析图,均可在频率特征决定适宜分辨率参考值时起到一定的参考作用。通过样区实验验证,实现简便,可度量性强,与其他相关研究具有一致性,对确定适宜格网分辨率参考值具有一定的借鉴意义。     

月球构造新认识：基于60m高精度全月月形图的月球构造形态学研究

一直以来月球上都没有发现像地球上一样的全球板块构造现象,被认为是属于单板块构造的行星体并且是不活动的。随着月球地形探测精度的提高,人们逐渐发现了一些地质现象表明月球并不像之前想象的一样是不活动的。高精度的月形数据显示出了月球上除了存在众所周知的(撞击作用产生的)复杂的撞击构造外,仍然存在许多可能由内生作用产生的构造特征:如裂谷、山脊、火山群等。本文利用最新高精度月球激光高度数据(LOLA数据)建立了全月60m(相当于7秒网格)高精度月形图。由于数据量超大(TB级别),作者编写了基于并行架构的集群计算处理代码,其计算效率提高了近300倍。基于这些图件,作者在全球范围内找出许多重要的构造现象,并根据其构造及地质特征进行分类研究。研究结果表明并不像之前认识一样,月球上的确存在许多地质构造体是由月球的内生地质作用所产生,并建立对于月球结构和构造的新认识。此外,通过对比发现,像地球上全球尺度的线性山脉只是板块构造运动的结果;另一方面,在无板块构造的行星上,就像月球一样,会产生大面积的高地(月陆)和低地(月海地区),这种地质现象很有可能是行星地壳岩浆演化的直接结果。在文章最后,作者还将制作出的60m分辨率的全月月形系列图件附后并公开,以方便其他科研人员进一步开展相关研究;并以此敬献中国地质科学院60周年庆典。