登陆过程中热带风暴"黄蜂"螺旋云带的分析

分析了热带风暴"黄蜂"在登陆过程中逐小时高分辨红外云图上的螺旋云带及其强对流云团的变化规律.从强对流云团发展为主螺旋云带的演变过程中,螺旋云带主要表现为其前端的对流逐渐加强,其余部分逐渐减弱,以及前端的强对流云团总体表现为旋入运动且维持时间较长,而其余部分的云团总体表现为远离中心等的特征.初步探讨了螺旋云带结构变化与风暴强度之间的关系和"黄蜂"在登陆后迅速减弱的可能原因.     

GIS中线元的误差熵带研究

基于现有的线元位置不确定性模型大多与置信水平的选取有关,而置信水平的选取带有一定程度的主观性,因而不能惟一确定,引入信息熵理论,提出了线元的误差熵带模型,并将它与“E－带”进行了比较,计算了落入其内的概率。该模型根据联合熵惟一确定,与置信水平的选取无关。     

地震前低频事件的实验研究

介绍了几种强震前超低频事件的观测证据,并通过实验,研究了产生和传播机理。初步结果表明,微破裂的集结和断层的破裂起始会出现超低频脉冲,并透射到空气中形成次声波。塑性体的冲击或超临界流体的膨胀比脆性破裂更容易激发（超）低频波,且不伴随明显高频辐射成分。这样可以较为合理地解释震前“平衡”背景下的（超）低频事件。对实验中破坏前的低频脉冲给出了断裂力学解释。断裂力学的实验和膨胀－－扩容理论证明了震前会产生断层的张裂隙,从而为超临界流体提供了运移空间。流体在运移过程中突然涨缩会激发（超）低频辐射波。讨论了改进（超）低频事件的观测条件问题。     

新疆伽师强震群区基底界面结构特征

用射线分布分析法对伽师强震群区的高分辨折射地震剖面资料进行了更进一步的分析处理， 得到了伽师强震群区更完整的基底界面结构特征. 结果表明，在伽师强震群区地壳上部存在两个明显的结构界面:第一个界面的结构连续、完整，其埋深变化不大， 在2.6～3.3 km之间，为一向天山方向逐渐抬升、 近平直的倾斜界面；第二个界面的埋深变化较大， 在8.5～11.8 km之间，为古老的塔里木盆地结晶基底. 在约37 km桩号附近结晶基底有近2.5 km的深度突变， 推断可能是伽师强震群区超基底断裂所致. 以该断裂为界，结晶基底分为西南、东北两段. 每段内界面的埋深变化不大， 西南段的埋深约11.5 km， 东北段的埋深约为8.5～9.0 km，该段在从西南向东北整体抬升的背景上略有上隆，反映出在塔里木地块西北缘特殊的构造环境下上部地壳的变形特征.      

MAXIMUM INFORMATION ENTROPY THEORY OF EFFLUENT BAND IN OPEN CHANNEL UNIFORM FLOW

ＭＡＸＩＭＵＭＩＮＦＯＲＭＡＴＩＯＮＥＮＴＲＯＰＹＴＨＥＯＲＹＯＦＥＦＦＬＵＥＮＴＢＡＮＤＩＮＯＰＥＮＣＨＡＮＮＥＬＵＮＩＦＯＲＭＦＬＯＷＫｅＺｈｏｎｇＨＵＡＮＧ１ａｎｄＴａｏＪＩＡＮＧ２ＡＢＳＴＲＡＣＴＴｈｅｐｒｉｎｃｉｐｌｅｏｆｍａｘｉｍｕｍ...     

穿过张家口—渤海地震带西缘的折射剖面所揭示的地壳上地幔构造与速度结构

近期完成的北北东向的繁峙～太仆寺旗宽角反射／折射剖面,由山西断隆进入内蒙地轴,它穿过了山西地震带的大同～阳高震区和北西西向张家口～渤海地震带的西北缘。其主要目的是探测研究张～渤地震带及其两侧壳幔构造与速度结构的差异及其与地震活动的相关性。结果表明：张～渤地震带壳内界面及莫霍面较其两侧有１．０～２．０ｋｍ的不同程度的上隆;在阳原～张家口之间地壳结构纵向与横向非均匀性明显,上地壳和下地壳上部有局部的速度逆转,下地壳下部的低速层由山西断隆一直延伸至内蒙地轴,上地幔顶部的速度梯度明显增大;在阳原、怀安和张北附近分别存在着延伸至莫霍面的地壳深断裂带;在内蒙地轴一系列壳内界面不明显。     

P–T evolution of kyanite eclogite from the Pirin Mountains (SW Bulgaria): implications for the Rhodope UHP Metamorphic Complex

A new occurrence of kyanite eclogite in the Pirin Mountains of southwestern Bulgaria within the rocks belonging to the Obidim Unit of the Rhodope Metamorphic Complex is presented. This eclogite provides important information about the peak–pressure conditions despite strong thermal overprint at low pressure. Textural relationships, phase equilibrium modelling and conventional geothermobarometry were used to constrain the metamorphic evolution. Garnet porphyroblasts with inclusions of omphacite (up to 43 mol.% Jd), phengite (up to 3.5 Si p.f.u.), kyanite, polycrystalline quartz, pargasitic amphibole, zoisite and rutile in the Mg‐rich cores (X_Mg = 0.44–0.46) record a prograde increase in P–T conditions from ～2.5 GPa and 650 °C to ～3 GPa and 700–750 °C. Maximum pressure values fall within the stability field of coesite. During exhumation, the peak–pressure assemblage garnet + omphacite + phengite + kyanite was variably overprinted by a lower pressure one forming symplectitic textures, such as diopside + plagioclase after omphacite and biotite + plagioclase after phengite. The development of spinel (X_Mg = 0.4–0.45) + corundum + anorthite assemblage in the kyanite‐bearing domains at ～1.1 GPa and 800–850 °C suggests a thermal overprint in the high‐pressure granulite facies stability field. This thermal event was followed by cooling at ～0.8 GPa under amphibolite facies conditions; retrograde kelyphite texture involving plagioclase and amphibole was developed around garnet. Our results add to the already existing evidence for ultra high pressure (UHP) metamorphism in the Upper Allochthon of the Rhodope Metamorphic Complex as in the Kimi Unit and show that it is more widespread than previously known. Published age data and field structural relations suggest that the Obidim Unit represents Variscan continental crust involved into the Alpine nappe edifice of the Rhodopes and that eclogite facies metamorphism was Palaeozoic, in contrast to the Kimi Unit where age determinations suggest a Jurassic or Cretaceous age for UHP metamorphism. This implies that UHP metamorphism in the Upper Allochthon of the Rhodopes may have occurred twice, during Alpine and pre‐Alpine orogenic events, and that two independent HP/UHP provinces of different age overlap in this area.     

频率可切换的矩形缝隙环频率选择表面

基于金属屏上周期排列的缝隙单元结构的通带特性,提出矩形缝隙环(Rectangular Slot Ring,RSR)加载短路线的单元结构实现频率可调频率选择表面(Frequency Selective Surface,FSS).谐振缝隙单元开路与短路时相对应的谐振频率分别为13 GHz和15 GHz.RSR-FSS选用Rogers RO4003介质作为基板,按照12×12的方阵进行周期排列,利用全波电磁仿真软件CST对其进行了电磁传输特性仿真.最终,通过实验验证了该频率选择表面在Ku波段通过连通和断开短路线可以进行频率的切换.     

Emerging coral diseases: a temperature‐driven process?

In the last few decades there has been a surge in research focusing on coral disease. While climate change, specifically rising sea surface temperature, has been proposed as a major and growing driver of the emergence of marine diseases, to date a solid connection between disease epizootics and elevated sea surface temperature has not been established. However, a wealth of data now exists, compiled from many different perspectives, that may support such a connection. In this work we provide a comprehensive review targeting one coral disease, black band disease, that spans the infection process, pathobiology, and epizootiology, and links specific mechanisms of the disease process to increasing temperatures. This temperature‐driven pattern of infection can be expanded to include similar processes associated with other temperature‐related coral diseases. The conclusions presented here are based upon the results of many studies using a diverse suite of approaches that have been synthesized to argue that the emergence and continuing spread of black band disease is linked to warming sea surface temperatures. In summary, as global ocean temperatures increase seasonally and over decades, the environment shifts to become more favorable for the growth of potentially pathogenic microorganisms endemic to the immediate environment of the reef. The increase in the relative number of potential pathogens in the microbial community produces microenvironments conducive to the growth of other potential pathogens, leading to infection by a polymicrobial consortium. This consortium is easily perturbed by a (seasonal) temperature decrease, but remains associated with the coral host and can be reactivated with a subsequent seasonal increase in temperature, resulting in a cycle of temperature‐dependent disease emergence.     

山东半岛南部一次沿海强降雨成因分析

利用常规气象观测资料、区域自动站观测资料、NCEP/NCAR 1°×1°再分析资料和雷达探测等资料,对2012年9月21日山东半岛南部沿海强降雨过程的成因进行了天气学诊断分析,结果表明:1强降雨是在500hPa第1个西风槽过后第2个西风槽逼近的过程中产生的,850hPa以下为偏南的向岸风,且风速随时间增大,形成偏南的超低空急流,持续地向沿海输送水汽和能量,造成水汽辐合、湿度增大、对流有效位能升高。产生强降雨的水汽和不稳定能量条件远小于内陆地区。2在向岸的超低空急流的左侧产生中小尺度的涡旋和辐合上升,海岸地形抬升作用使得上升运动加强,触发对流不稳定能量释放,造成强降水。3在雷达回波中,小尺度的对流单体沿海岸线向西南方向发展,后期在日照附近的沿海形成弓状回波,向东南海区移动。