浙江江山石鼓水库除险加固工程技术措施

根据浙江江山石鼓水库大坝的结构构造特点、水库地质条件以及水库病险原因与状况，制定出一套科学完善的病险水库除险加固工程技术措施和施工操作规程，对病险水库进行了全面彻底治理，并取得良好效果。详细介绍了工程病险状况，除险加固方案设计，施工工艺及操作规程，加固效果检测及评价等。     

Stability analysis of tunnels driven in jointed rocks by means of a homogenized limit analysis approach

Conceived as a potential alternative to the classical design methods employed for analyzing the stability of underground structures driven in jointed rocks, the homogenization approach stems from the heuristic idea that, from a macroscopic point of view, a rock mass cut by a network of joints may be perceived as a homogenized continuum. The strength properties of the latter can be theoretically obtained from the failure conditions of its individual constituents: rock matrix and joint interfaces. At the material level, the limit analysis reasoning is used in the context of homogenization to formulate the homogenized strength criterion of a jointed rock mass in the particular situation of a single set of parallel joints. As it could be expected, the obtained closed‐form expressions show the strength anisotropy induced by joint preferential orientation. The support functions (π functions) associated with the homogenized strength criterion are also determined in both plane strain and three‐dimensional cases. This criterion is then applied to the investigation of stability analysis of a tunnel excavated in a jointed rock mass. Upper bounds estimated of the stability factor are derived from the implementation of the kinematic approach directly on the homogenized underground structure. Finally, the approach is applied to analyze and discuss the collapse of the Pinheiros subway station (São Paulo, Brazil). Copyright © 2014 John Wiley & Sons, Ltd.     

A new numerical approach to the hyperstatic reaction method for segmental tunnel linings

This paper proposes a numerical approach to the hyperstatic reaction method (HRM) for the analysis of segmental tunnel linings. The influence of segmental joints has been considered directly using a fixity ratio that is determined on the basis of the rotational stiffness. The parameters necessary for the calculation are presented. A specific implementation has been developed using a FEM framework. This code is able to consider the three‐dimensional (3D) effect of segment joints in successive rings on the tunnel lining behaviour. The present HRM allows one to take an arbitrary distribution of segment joints along the tunnel boundary into consideration. In addition, the rotational stiffness of segment joints has been simulated using nonlinear behaviour, as it is closer to the true behaviour of a joint than linear or bilinear behaviour. The numerical results of three hypotheses on ring interaction, which allow the 3D effect of a segmental tunnel lining to be taken into account, have been compared with data obtained from the shield‐driven tunnel of the Bologna–Florence high‐speed railway line project. The numerical results presented in the paper show that the proposed HRM can be used to effectively estimate the behaviour of a segmental tunnel lining. Copyright © 2014 John Wiley & Sons, Ltd.     

基于GDAL的遥感影像快速裁切技术

介绍了基于开源GDAL类库开发,实现遥感影像的大批量快速裁切的技术,经应用测试,该技术提高了遥感影像处理的作业效率和自动化水平,降低了生产成本。     

秩亏自由网平差在地铁隧道保护区中的应用

地铁隧道保护区沉降监测网中包含多个基准点,依据不同基准点平差所得结果也不相同。本文引入秩亏自由网平差方法,将所有基准点视为待定参数进行平差,并通过工程实例,验证此方法在地铁隧道保护区沉降观测中有一定的适用性。     

浅析运营期间电力隧道自动化监测技术

针对城市电力隧道结构、走向多变、电缆设施多、电磁干扰大等因素,常规的监测方法难以顺利完成的现状,对目前先进的3种隧道结构自动化监测系统进行深入的研究比较,光纤传感自动技术解决了电力隧道结构监测点布设困难,数据受电磁干扰大的问题,能实时有效、可靠、高精度地监控电力隧道,及时掌握隧道的应力、应变及振动等主要结构参数,确保隧道结构安全。研究对类似的城市电力隧道自动化监测具有一定的参考意义。     

基于等高线隔断线确定DEM适宜分辨率的方法研究

分辨率是等高线数据插值生成格网DEM数据过程中需要考虑的一个重要参数,适宜的分辨率既能将等高线高程信息尽可能保留,又不会因插值造成数据冗余及误差。基于对格网DEM生成方式的理解,提出了等高线隔断线的相关概念,分析了基于地形图矢量化的等高线数据插值生成格网DEM数据,由不同长度等高线隔断线频率统计来确定格网适宜分辨率参考值的方法。同时,不同长度等高线隔断线的长度与其频率相乘得到标准长度,以及等高线隔断线中心点生成的密度分析图,均可在频率特征决定适宜分辨率参考值时起到一定的参考作用。通过样区实验验证,实现简便,可度量性强,与其他相关研究具有一致性,对确定适宜格网分辨率参考值具有一定的借鉴意义。     

松辽盆地大陆科钻二开段大井眼钻井液技术

CCSD-SK2井是一口钻穿松辽盆地白垩纪陆相沉积地层的中国大陆科学钻探井。二开段先以216mm口径钻至2806.20m,然后进行444.5mm口径扩孔。泥页岩地层大井眼钻进过程中粘土矿物含量高且易造浆,砂砾岩层渗透性强易粘卡,井壁稳定控制与钻屑携带难度大。选用了钾铵聚合物钻井液体系和聚磺钻井液体系,通过正交实验确定了钻井液配方。将钻井液控制在合适的密度、较低的失水量以及较强的封堵性,有效实现了井壁稳定;保持适当的环空返速、较高的动塑比以及定期打稠塞举砂等措施,有效实现了井眼净化。1086.45m~1147.56m与1182.74m~1256.01m井段累计收获岩心130.90m,取心率达到97.41%,平均机械钻速为0.84m/h;最终顺利钻至2806.20m。     

港珠澳大桥沉管隧道贯通误差预计

针对港珠澳大桥沉管隧道的安全贯通问题,该文从隧道外GPS网的布设及施测方法出发,通过多期复测数据评价GPS网具有可靠的测量精度;通过对GPS网点的稳定性分析,阐明了沉管隧道地面控制点位无法长期保留、稳定性差的特点;最后就GPS网引起的贯通误差影响值进行了估算。     

仿生高效切削齿试验研究

在仿生高效耐磨理论的指导下,以鼹鼠爪趾为仿生原型,引入了其经长期进化而具有的高效、耐磨的特性。选用CVD多晶金刚石为切削齿的切削单元,采用真空热压烧结工艺制备仿生高效切削齿,并将其与常规PDC齿、仿生PDC齿的耐磨性和切削效率进行对比试验,结果显示：仿生高效切削齿的耐磨性较常规PDC齿提高23%;切削效率较常规PDC齿提高1.49倍,较仿生PDC齿提高48%。初步证明了仿生高效切削齿工艺的可行性,为下一步高效切削钻头的研究奠定了坚实的基础。