PAN－PVAβ修正新光度法测定地表水中的微量锌

本文研究了ｚｎ（Ⅱ）与ＰＡＮ和ＰＶＡ在ＮＨ＿４Ｃｌ－ＮＨ＿４ＯＨ缓冲介质中的显色反应，提出在５２０ｎｍ处用β修正新光度法测定微量锌。该法可准确消除剩余显色剂的干扰，分析精密度、灵敏度和线性范围均比单波长高，修正吸光度（Ａ＿ｓ）与Ｚｎ（Ⅱ）浓度在０－１．４μｇ／ｍｌ符合比耳定律，检出限０．０２μｇ／ｍｌ，样品加标回收率／％９３－９６，方法适合环境水样中锌的测定。     

豫西南矽线石物相分析方法研究

以豫西南地区4个矿区的矿物组合为依据,建立了铝量法测定矽线石含量的物相分析方法。对比了不同方法制备的矽线石及其不同存在条件下溶解率的差异,确定了接近矿区实际的、准确合理的分析结果校正办法。     

Estimation of abl Parameters Using the Vertical Velocity Measurements of an Acoustic Sounder

The friction velocity, the surface heat flux and the height of the Atmospheric Boundary Layer (ABL) are important parameters. In this work, vertical velocity variance ( _w ² ) and wind velocity structure parameter (C _v ² ) profiles estimated by acoustic sounder measurements are used, along with similarity relations, to estimate these parameters in the unstable Atmospheric Boundary Layer and the friction velocity in the stable one. The data were collected by two acoustic sounders with different height range and resolution under various atmospheric conditions (stability) and at two experimental sites in different terrain. The C _v ² profiles are estimated using gate difference of the vertical velocity measurements and the assumption of local isotropy. The vertical velocity data are corrected for the significant effects of noisy measurements and sampling volume averaging on the _w ² and C _v ² estimations using original techniques that are presented in this work. The results of the similarity method using acoustic sounder data are compared against estimates of the corresponding atmospheric parameters obtained from direct measurements. The comparison confirms the ability of the method to provide reasonably accurate estimates of these parameters especially in the middle of the day.     

Estimation and improvement in the geolocation accuracy of rational polynomial coefficients with minimum GCPs using KOMPSAT-3A

ABSTRACT

In this paper, we propose a method to regenerate Rational Polynomial Coefficients (RPCs) using KOMPSAT-3A imagery and to reduce the geolocation error using minimum ground control points (GCPs). To estimate the new RPCs, the physical sensor model fitted to KOMPSAT-3A imagery was utilized and virtual GCPs over the study area were created. The size of the virtual grid used was 20x20x20. To remove the sensor-related errors in physical sensor model, three different image correction models (image coordinate translation model, shift and drift model, and affine transformation model) were additionally applied. We evaluated our proposed method in two areas within Korea, one in urban (Seoul) and one in rural (Goheung) areas. The results showed that there was a significant improvement after applying the suggested approach in the two areas. The image coordinate translation model is suggested in terms of GCP requirement and expected errors estimated from the error propagation analysis using Gauss–Markov Model (GMM).     

VLBI观测双线极化条纹拟合方法

提出了一种可用于下一代VLBI观测系统(VGOS)的双线极化条纹拟合方法。现有的VLBI观测模式采用的是右圆极化(RCP),而VGOS系统采用的是双线极化。本文方法包括校正和组合条纹拟合两部分。校正部分选择一颗强源作为参考源,分别得到不同极化方式下的通道时延及相位校正数据,用于目标源的校正。组合条纹拟合部分将4种极化分量的可见度数据组合成伪Stokes分量,通过搜索差分星位角使伪Stokes分量的幅值达到最大,从而获得最终的时延观测量。与单极化条纹拟合相比,组合极化获得的条纹具有更高的信噪比(SNR)及更小的条纹相位弥散度。     

风云四号气象卫星地面测距系统精度改进技术

风云四号静止气象卫星(FY-4)地面测距系统用于获得分布在不同地方的5个地面站到卫星的精确距离,进而利用得到的距离数据确定并预报卫星的轨道和位置,所以测距精度是影响卫星轨道和位置确定精度的主要因素。本文根据测距系统工作的原理及过程,分析影响测距精度的误差来源,从测距体制、站址坐标测量、地面设备时延测量、转发器时延测量、大气传输时延测量和各站时间同步几个方面分析了风云四号测距系统为了提高测距精度采取的相应的技术手段。     

Chemical Mechanism Development: Laboratory Studies and Model Applications

Within the German Tropospheric Research Programme (TFS) numerous kinetic and mechanistic studies on the tropospheric reaction/degradation of the following reactants were carried out: oxygenated VOC, aromatic VOC, biogenic VOC, short-lived intermediates, such as alkoxy and alkylperoxy radicals.At the conception of the projects these selected groups were classes of VOC or intermediates for which the atmospheric oxidation mechanisms were either poorly characterised or totally unknown. The motivation for these studies was the attainment of significant improvements in our understanding of the atmospheric chemical oxidation processes of these compounds, particularly with respect to their involvement in photooxidant formation in the troposphere. In the present paper the types of experimental investigations performed and the results obtained within the various projects are briefly summarised. The major achievements are highlighted and discussed in terms of their contribution to improving our understanding of the chemical processes controlling photosmog formation in the troposphere.     

遥感影像镶嵌时拼接缝的消除方法

对现有的影像并接缝消除方法的优缺点进行了分析,提出了拼接缝消除的强制改正方法,并用大量的实际图像进行了试验。结果表明：所提出的方法具有较好的拼接缝消除效果,且算法简单,易于实现,可以处理彩色和黑白等多种图像。     

Wavelet filter analysis of atmospheric pressure effects in the long-period seismic mode band

The importance of the reduction of atmospheric pressure effects becomes very clear when investigating seismic normal-mode spectra below 1.5 mHz. The usual simple correction method consists in subtracting a term converted from local atmospheric pressure (pressure multiplied by a frequency-independent admittance) from the gravity record in time domain. Thus, estimating an efficient admittance is the key for an improved correction. Band-pass filters derived from dyadic orthogonal wavelet transform, having narrow pass-bands with good frequency response but without Gibbs phenomenon and causing no phase lag, are very helpful to estimate an efficient admittance, which is both time and frequency-dependent. Processing of high quality superconducting gravimeter (SG) records for the great Sumatra earthquake (Mw = 9.3, Dec 26, 2004) with wavelet filters reveal the three very well resolved splitting singlets of overtone ₂S₁ with a single gravity record after correction with time-dependent and frequency-dependent admittances. We also observe all coupled toroidal modes below 1.5 mHz, except ₀T₅, ₀T₇ and ₁T₁, with good signal-to-noise ratio (SNR); moreover, toroidal modes ₁T₂ and ₁T₃ are for the first time unambiguously revealed in vertical components.     

Constraining P-wave velocity variations in the upper mantle beneath Southeast Asia

We have produced a P-wave model of the upper mantle beneath Southeast (SE) Asia from reprocessed short period International Seismological Centre (ISC) P and pP data, short period P data of the Annual Bulletin of Chinese Earthquakes (ABCE), and long period PP-P data. We used 3D sensitivity kernels to combine the datasets, and mantle structure was parameterized with an irregular grid. In the best-sampled region our data resolve structure on scale lengths less than 150 km. The smearing of crustal anomalies to larger depths is reduced by a crustal correction using an a priori 3D model. Our tomographic inversions reveal high-velocity roots beneath the Archean Ordos Plateau, the Sichuan Basin, and other continental blocks in SE Asia. Beneath the Himalayan Block we detect high seismic velocities, which we associate with subduction of Indian lithospheric mantle. This structure is visible above the 410 km discontinuity and may not connect to the remnant of the Neo-Tethys oceanic slab in the lower mantle. Our images suggest that only the southwestern part of the Tibetan plateau is underlain by Indian lithosphere and, thus, that the upper mantle beneath northeastern Tibet is primarily of Asian origin. Our imaging also reveals a large-scale high-velocity structure in the transition zone beneath the Yangtze Craton, which could have been produced in multiple subduction episodes. The low P-wave velocities beneath the Hainan Island are most prominent in the upper mantle and transition zone; they may represent counter flow from the surrounding subduction zones, and may not be unrelated to processes beneath eastern Tibet.