基于ROMS和4DVAR的沿轨与网格化SSH数据同化效果评价

Remote sensing products are significant in the data assimilation of an ocean model. Considering the resolution and space coverage of different remote sensing data, two types of sea surface height(SSH) product are employed in the assimilation, including the gridded products from AVISO and the original along-track observations used in the generation. To explore their impact on the assimilation results, an experiment focus on the South China Sea(SCS) is conducted based on the Regional Ocean Modeling System(ROMS) and the four-dimensional variational data assimilation(4 DVAR) technology. The comparison with EN4 data set and Argo profile indicates that, the along-track SSH assimilation result presents to be more accurate than the gridded SSH assimilation, because some noises may have been introduced in the merging process. Moreover, the mesoscale eddy detection capability of the assimilation results is analyzed by a vector geometry–based algorithm. It is verified that, the assimilation of the gridded SSH shows superiority in describing the eddy's characteristics, since the complete structure of the ocean surface has been reconstructed by the original data merging.     

Numerical modeling investigation on turbulent oscillatory flow over a plane rough bed composed by randomly arrayed particles

A three-dimensional numerical model is established to simulate the turbulent oscillatory boundary layer over a fixed and rough bed composed by randomly arrayed solid spheres based on the lattice Boltzmann method and the large eddy simulation model.The equivalent roughness height,the location of the theoretical bed and the time variation of the friction velocity are investigated using the log-fit method.The time series of turbulent intensity and Reynolds stress are also investigated.The equivalent roughness height of cases with Reynolds numbers of 1×10~4–6×10~4 is approximately 2.81 d(grain size).The time variation of the friction velocity in an oscillatory cycle exhibits sinusoidal-like behavior.The friction factor depends on the relative roughness in the rough turbulent regime,and the pattern of solid particles arrayed as the rough bed in the numerical simulations has no obvious effect on the friction factor.     

HHT-EEMD用于IGS站高程时间序列分析

利用经验模态分解（EMD）和整体经验模态分解（EEMD）方法,将BJFS站2000~2015年高程时间序列进行分解,发现其不仅存在1 a、0.5 a、0.25 a、2个月、1个月以及长周期等周期项,还存在以往方法很难探测出来的近似2 a周期信号。与EMD分解结果对比,整体经验模态分解可以明显减弱模式混叠现象。对各分量进行Hilbert 变换（HHT）,得到时间-频率-能量的Hilbert 频谱图。结果表明,年周期和2 a周期变化是高程运动的主要贡献项。利用小波变换方法对比验证EEMD的分解结果表明,与小波分析相比,EEMD重构信号与高程序列差异的RMS更小,证明了HHT-EEMD方法在数据资料分析过程中的有效性。对环境负载及GRACE负载造成的测站位移进行功率谱分析得出,环境负载确实会造成IGS站高程时间序列的1 a、0.5 a以及季节性运动,GRACE负载还验证了2 a信号的存在。     

Response and capacity of monopod caisson foundation under eccentric lateral loads

Monopod caisson foundation is a viable alternative for supporting offshore wind turbines located at shallow water depths. This foundation system has to resist overturning moment generated due to resultant lateral load, arising from wind and water wave action, that can act at any loading height above the seabed. This paper presents results of a numerical investigation performed to determine the influence of loading height, caisson geometry and superstructure load on the ultimate lateral capacity, initial stiffness, and soil failure zone of the foundation, when installed in very dense sand. Both the ultimate and serviceable states of the caisson foundation obtained from the analyses are represented in terms of envelopes plotted between lateral load and overturning moment. Simplified expressions, which take into account the influence of caisson geometry, loading height, and soil properties, are also presented to serve as a preliminary base for design of the monopod caisson foundation.     

Optimal design of two-dimensional wings in ground effect using multi-objective genetic algorithm

The shape optimization of the 2-dimensional wing in ground effect (WIG) has been performed by the integration of CFD (computational fluid dynamics) and MOGA (multi-objective genetic algorithm). Because of the trade-off between the aerodynamic forces and the height stability, it is difficult to satisfy the design requirements of efficiency and stability at the same time. In this study, the lift coefficient, the lift-drag ratio and the static height stability are chosen as the objective functions to obtain the optimal wing profiles of a WIG craft. An NACA0015 airfoil is used for the baseline model; the aerodynamic characteristics of the base model are compared with that of the optimal solutions. The profile of the airfoil is constructed by four Bezier curves with fourteen control points resulting in the eighteen coordinates, which are adopted as the design variables. The optimal solutions of the multi-objective optimization are not unique but a set of the non-dominated optima: the Pareto frontiers or a Pareto set. As the results of the multi-objective optimization, the forty Pareto optima, which include high-lift, high-efficiency, and more stable airfoils on the edge of the 3-dimensional objective space, are obtained at thirty evolutions of the generation.     

海冰爬坡和堆积行为的试验研究

对于浅海区采油平台等设施常采用斜坡式人工岛形式,虽然在一定程度上起到降低海冰对平台的作用,但是海冰沿着斜坡上爬至平台并形成堆积,同样也会对平台设施造成破坏,因此有必要对海冰堆积爬坡的关键参数进行研究。通过在冰排前进方向放置混凝土实体结构物模拟海冰堆积和爬坡过程,分析了模型冰爬坡和下滑角度、最大堆积高度等关键参数以及模型冰断裂长度的统计特性及其与变形模量的关系,试验结果表明水位越高,冰排越容易发生堆积爬坡。破碎的模型冰在结构物前堆积后,形成爬坡角和下滑角。爬坡角随着堆积体的增大而增大,下滑角则逐渐减小。堆积冰高度一定时,高度不再增加,在来冰方向会形成新的堆积。这种现象为浅海区海上结构物的防冰减灾提供了新思路。     

Parameter analysis for gate metal—oxide—semiconductor structures of ion-implanted 4H silicon carbide metal—semiconductor field-effect transistors

From the theoretical analysis of the thermionic emission model of current--voltage characteristics, this paper extracts the parameters for the gate Schottky contact of two ion-implanted 4H-SiC metal--semiconductor field-effect transistors (sample A and sample B for three and four times multiple ion-implantation channel region respectively) fabricated in the experiment, including the ideality factor, the series resistance, the zero-field barrier height, the interface oxide capacitance, the interface state density distribution, the neutral level of interface states and the fixed space charge density. The methods to improve the interface of the ion-implanted Schottky contact are given at last.     

A joint distribution of significant wave height and characteristic surf parameter

The paper provides a joint distribution of significant wave height and characteristic surf parameter. The characteristic surf parameter is given by the ratio between the slope of a beach or a structure and the square root of the characteristic wave steepness in deep water defined in terms of the significant wave height and the spectral peak period. The characteristic surf parameter is used to characterize surf zone processes and is relevant for e.g. wave run-up on beaches and coastal structures. The paper presents statistical properties of the wave parameters as well as an example of results corresponding to typical field conditions.     

利用相关逼近法建立定位与姿态数据的同步模型

根据海道测量精密测量的需求,对姿态与定位数据融合的同步方法进行了研究。通过GPS大地高数据和升沉数据,建立了一种基于相关逼近原理的定位与姿态数据同步模型。该模型能够确定定位与姿态数据的相对延时,实现两类数据在同一时间基准下的同步。实例计算表明,定位与姿态数据的相对延迟时间已成为两类数据融合应用中必须考虑的因素。由同步模型解算后,GPS大地高数据与总升沉数据体现了更好的一致性,由此也验证了模型的有效性。     

利用TOPEX卫星高度计资料分析台湾岛周边海域巨浪和大风特征

卫星高度计实现了对全球性或区域性的海洋参量的实时监测,TOPEX卫星高度计提供了迄今为止时间序列最长、数据质量最高的全球海面风速和有效波高的同步观测资料。利用TOPEX卫星高度计资料,分析了有效波高4m以上的巨浪在台湾岛周边海域的时空分布特征,结果表明台湾岛周边海域巨浪的分布具有明显的季节特征。每年平均有效波高最大值大多数出现在夏季,春季是1a中有效波高最小的季节,而秋季和冬季是巨浪出现频率最高的季节。波高大于6m的巨浪大都出现在台湾岛东部及东北部海域,在南部海域出现较少。