基于全站仪的圆形建筑物倾斜观测的方法和精度

随着建筑物的不断增高、增大,其稳定性和可靠性成为人们关注的焦点.其中建筑物的倾斜度是衡量施工技术质量的重要指标之一.而传统的观测方法如经纬仪测小角法、经纬仪投点法,由于受仪器精度和观测条件的限制,观测精度较低.拓普康全站仪独具推出的圆柱偏心测量功能为快速、准确测定圆形建筑物的倾斜量开辟了一条新途径,本文阐述了基于全站仪的圆形建筑物倾斜观测的原理和方法,并对其精度进行分析.     

自由测站法曲线座标计算程序设计

通过对曲线测设和测点坐标计算过程的分析，把坐标计算的程序设计归结为有向直线与X轴顺时针夹角即方位角的计算和线路转向转角的计算，弥补了测点位置和计算公式分类复杂等不足，简化了程序设计和计算过程。     

吐哈盆地十红滩铀矿床水文地球化学特征

本文根据水化学资料的研究,探讨了十红滩铀矿床含矿含水层高矿化度地下水的成因,分析了高矿化度水对铀溶解迁移的影响及碳酸盐的形成机理.     

新疆鄯善康古尔塔格蛇绿岩及其大地构造意义

康古尔塔格蛇绿岩的岩石组合为变质橄榄岩-堆晶橄榄岩-辉长岩-斜长花岗岩-辉绿岩-玄武岩。方辉橄榄岩（蛇纹岩）、蛇纹石化辉石岩、蚀变辉长岩与特罗多斯蛇绿岩中同类型岩石类似，岩石总体低钾。变质橄榄岩MgO／（MgO＋TFeO）为0．834～0．866，TiO，（wt％）为0．02％，为SSZ型蛇绿岩的变质橄榄岩。玄武岩的构造环境判别显示其形成于边缘海盆。放射虫硅质岩的Al2O3／（Al2O3＋Fe2O3）值平均为0．047，MnO／TiO2比值平均为0．93，Ce具负异常，Ce／Ce^＊=0．548，Lan／Cen=1．661．表明放射虫硅质岩的形成环境与洋中脊有密切关系。该蛇绿岩位于塔里木板块和哈萨克斯坦-准噶尔板块的艾比湖-康古尔塔格缝合线上，为一套无序产出的古生代北天山洋在该区的古洋壳残片。     

城市热岛效应监测方法研究进展

城市热岛效应是一种由于城市建筑及人们活动导致的热量在城区空间范围内聚集的现象,是城市气候最明显的特征之一.由于城市热岛影响因素以及相互关系的复杂性,为了精确细致地描述其时空分布,人们采用了多种方法来研究城市热岛现象,主要归纳为：气象站法、定点观测法、运动样带法、遥感测定法以及模拟预测等.最后,认为各种测定方法都存在一定的缺陷,建议多种测定方法综合运用.     

Effects of laser beam alignment tolerance on lidar accuracy

One of the major lidar error sources not yet analyzed in the literature is the tolerance of the laser beam alignment with respect to the scanning mirror. In this paper, the problem of quantifying these errors is solved for rotating polygon mirror type lidar systems. An arbitrary deviation of the beam from its design direction–the vector of beam misalignment–can be described by two independent parameters. We choose these as horizontal and vertical components of the misalignment vector in the body frame. Either component affects both, horizontal and vertical lidar accuracy. Horizontal lidar errors appear as scan line distortions—along and across track shifts, rotations and scaling. It is shown that the horizontal component of misalignment results in a scan line first being shifted across the track and then rotated around the vertical at the new center of the scan line. Resulting vertical lidar error, being a linear function of the scan angle, is similar to that produced by a roll bias. The vertical component of the beam misalignment causes scan line scaling and an along track shift. The corresponding vertical error is quadratic with respect to the scan angle. The magnitude of these effects is significant even at tight alignment tolerances and cannot be realistically accounted for in the conventional calibration model, which includes only range, attitude and GPS biases. Therefore, in order to attain better accuracy, this model must be expanded to include the beam misalignment parameters as well. Addition of new parameters into the model raises a question of whether they can be reliably solved for. To give a positive answer to this question, a calibration method must utilize not only ground control information, which is typically very limited, but also the relative accuracy information from the overlapping flight lines.     

51463迁站后与原站址的气候要素差异分析

迁站造成气象要素的不连续性，对资料使用带来困难，利用迁站后的对比观测资料，分析气温、风、降水资源的差异发现，季平均气温、最高、最低气温老站址均高于新站址；季平均风速、降水量老站址小于新站性，同时提出了一些差异量，供资料使用者参考。     

白云鄂博群中两个重要不整合界面特征及区域对比

白云鄂博群尖山组顶部的钙质风化壳和比鲁特组顶部的铁质风化壳分别代表长城系与蓟县系及蓟县系与青白口系的分界,并具较大区域上的一致性和可对比性。不整合界面的重新厘定,必然导致白云鄂博群的解体或改为白云鄂博超群。     

可调滞回模型的磁流变阻尼器及其试验

本文在现在磁流变阴尼器性能研究的基础上，提出了可调滞回模型的磁流变阻尼器及其试验方法，并进行理论、试验及算例分析。首先，根据恒定电流下磁流变阻尼器的阻尼力滞力特性，利用磁流变材料特性的电流（即磁场）可控特点，建立了变电流下的阻尼力滞回模型；其次，在中通过电路板控制外加电流与装置变形间的函数关系，实现了变电流调节的阻尼力滞回模型；最后，将磁流变阻尼器与橡胶隔震装置结合，形成智能磁流变隔夺装置，并对一个单自由度隔震结构进行了数值仿真分析。     

Estimation of azimuth and slowness of tele-seismic signals recorded by a local seismic network

Introduction The azimuth and slowness are two major features of seismic signals. The accurate estimation of them is quite important for both phase identification and event location. Generally, there are two types of seismic stations, i.e. 3-component stations (3C) and arrays. To estimate the two direc-tional parameters, the polarization analysis (Jurkevics, 1988) is commonly used for 3C stations and the frequency-wavenumber spectrum analysis ( f-k) (Capon, 1969; Kvaerna, Doornbos, 1986) is …