基于多波束声纳数据与反射模型的水下地形重建

利用多波束声纳数据重建水下地形,构建高空间分辨率的数字高程模型(DEM)对于在复杂水下区域的物质勘探、目标检测等方面有重要实用意义.然而,多波束声纳系统直接获得的测深数据空间分辨率有限本文基于多波束声纳系统采集的稀疏测深数据(空间位置)和密集回波强度数据(图像性质)来构建水下复杂地形高空间分辨率数字高程模型.利用采集的...     

海底入射角对多波束反向散射强度的影响及其改正

综合考虑测船姿态、声线弯曲和海底地形对入射角的影响,推导了计算多波束海底入射角的实用模型。根据Lambert法则,改正海底入射角对反向散射强度的影响。实例计算结果表明,所述模型能精确地计算波束在海底的入射角,有效地改正其对反向散射强度的影响。     

Dynamic morphology of small south‐eastern Mediterranean river mouths: a conceptual model

River mouths along the Israeli Mediterranean coast are characterized by a dynamic morphology as their channels migrate hundreds of meters along the coast. This study examines the dynamic morphology of seven such river mouths. It offers a conceptual model aimed at generalizing and describing their spatial and temporal morphological patterns, and the environmental factors influencing them. The study methodology comprised a detailed monitoring and mapping by GIS techniques, with quantitative data derived from historic aerial photographs, river discharge records, wave measurements, and a digital elevation model. These data were incorporated into a homogenous database and subsequently applied in the investigation of the morphological patterns of these mouths, and the analysis of their influencing factors. River mouths in this study occur in two distinctive topographic settings. In one setting (here termed barrier topography) the river mouth is deflected alongshore by a sandy barrier. In the second setting (termed funnel topography) the river mouth is confined to a funnel‐shaped topographic depression perpendicular to the coast. The behavior of river mouths in these two settings is quite distinctive. Barrier mouths usually migrate over larger distances, as they tend to deflect along a sand barrier and establish semi‐permanent channels along the dune toe. This enables the wide range migration of semi‐permanent channels over decades. Funnel topography mouths deflect over shorter distances and they rapidly migrate within the funnel boundaries. This study concludes that the topographic setting of the beach, a constant element in the temporal scale of this study, is the primary influencing factor on the morphology of the mouths studied. The influence of other factors on the morphology of these mouths differs in space and time and depends on the topographic settings.     

2.5-D DC Resistivity Modeling Considering Flexibility and Accuracy

We highlighted the flexibility of using unstructured mesh together with the local refinement by a resistivity model with complicated topography. The effect of topography is emphasized. Based on this, we calculated a specific class of layered models and found that the accuracy is not always satisfactory by utilizing the standard approach. As an improvement, we employed the layered earth as the reference model to calculate the wavenumbers. The comparison demonstrates that the accuracy is considerably improved...     

复杂岛屿海域的台风浪局地特征模拟与分析——以舟山海域为例

为了研究舟山海域复杂地形条件下的台风浪特征,在高分辨数值模拟中采用了利用海图资料处理复杂岛屿地形分布的方法,利用WAVEWATCHⅢ和SWAN模式相嵌套模拟了影响该海域的西北行路径的典型台风浪过程.分析表明,舟山海域的东南部、东北部、西北部、内部海域受台风的影响各不相同,台风浪特征分布与海域的岛屿分布、水深分布等因素密...     

复杂山地条件、特长、大埋深公路隧道 工程地震勘探技术方法

通过对复杂山地条件、特长、大埋深的雪峰山公路隧道的工程地震勘探实例,介绍和分析了根据实地情况开发和应用的高分辨率地震震源激发技术,复杂地形、地质构造条件下共排列双向变偏移距高分辨率反射波多次覆盖技术,环保型地震反射波与折射波法野外同步施工技术.     

Characteristics of the Submarine Topography and its Profile Type of the Coast of China

Based on the latest submarine topography data of the China 908 Project （China offshore marine environmental comprehensive investigation and assessment）,we analyzed the general China offshore submarine topographical characteristics and the factors influencing its development.The submarine topography off the coast of China follows the NW-SE trend of the land topography.The gradient of the submarine topography ranges from 0.2％ to 1.6％ with an average gradient of about 0.8％.The depth contours run mostly parallel to the coast,and extend out to sea in estuary areas.The submarine topography is dominated by the geological structure,which shows the typical characteristics of two uplifts and two subsidence events from north to south.The geological structure combined with the different sedimentary environments and complex hydrodynamic conditions produced topography that can be characterized by three types：sedimentary basins,compressionuplift,and transition form.In the sedimentary basin and compression-uplift regions,the topographical undulation is small,sediments are fine-grained,and the currents flow in a single direction,leading to bays with sedimentary plains and underwater accumulation slopes,which are of the same tectonic origin.Transition-type topography is characterized by strong undulations and mixed-size sediment particles,terraces and scarps inshore and shelf plains and erosion-deposition landforms offshore.This is a result of incomplete fault block development and repeated transgressions.In the deposition reformation regions （transition form type）,the topography has strong undulations,the sediments are coarse,tidal sand ridges are well-developed at terrigenoussupplied estuaries and convergence zones,and the Holocene sediments are thick,transformed by tides,river runoff,and currents.     

Water‐worked gravel beds in laboratory flumes – a natural analogue?

An investigation has been conducted to identify the key parameters that are likely to scale laboratory sediment deposits to the field scale. Two types of bed formation were examined: one where sediment is manually placed and screeded and the second where sediment is fed into a running flume. This later technique created deposits through sequential cycles of sediment transport and deposition. Detailed bed surface topography measurements have been made over a screeded bed and three fed beds. In addition, bulk subsurface porosity and hydraulic conductivity have been measured. By comparing the four beds, results revealed that certain physical properties of the screeded bed were clearly different from those of the fed beds. The screeded bed had a random organization of grains on both the surface and within the subsurface. The fed beds exhibited greater surface and subsurface organization and complexity, and had a number of properties that closely resembled those found for water‐worked gravel beds. The surfaces were water‐worked and armoured and there was preferential particle orientation and direction of imbrication in the subsurface. This suggested that fed beds are able to simulate, in a simplified manner, both the surface and subsurface properties of established gravel‐bed river deposits. The near‐bed flow properties were also compared. It revealed that the use of a screeded bed will typically cause an underestimation in the degree of temporal variability in the flow. Furthermore, time‐averaged streamwise velocities were found to be randomly organized over the screeded bed but were organized into long streamwise flow structures over the fed beds. It clearly showed that caution should be taken when comparing velocity measurements over screeded beds with water‐worked beds, and that the formation of fed beds offers an improved way of investigating intragravel flow and sediment–water interface exchange processes in gravel‐bed rivers at a laboratory scale. Copyright © 2008 John Wiley & Sons, Ltd.     

起伏地表下的直接叠前时间偏移

提出了一种新的叠前时间偏移方法和流程,可不必应用野外静校正,直接对起伏地表采集的地震数据进行叠前时间偏移.本文采用输入道成像方式,通过基于稳相点原理给出单道数据的走时和振幅计算方法,发展了一个表驱动的叠前时间偏移算法.偏移方法可依据同相轴是否被拉平确定叠加速度和修正近地表速度模型,也可依据拟成像的构造倾角,自适应地确定偏移孔径;后者既减少了偏移计算量,也压制了偏移噪声.文中用二维起伏地表的断陷盆地模型的理论数据验证了所发展方法的成像效果.