Well-balanced numerical modelling of non-uniform sediment transport in alluvial rivers

The last two decades have witnessed the development and application of well-balanced numerical models for shallow flows in natural rivers.However,until now there have been no such models for flows with non-uniform sediment transport.This paper presents a 1D well-balanced model to simulate flows and non-capacity transport of non-uniform sediment in alluvial rivers.The active layer formulation is adopted to resolve the change of bed sediment composition.In the framework of the finite volume Slope Llmiter Centred(SLIC) scheme,a surface gradient method is incorporated to attain well-balanced solutions to the governing equations.The proposed model is tested against typical cases with irregular topography,including the refilling of dredged trenches,aggradation due to sediment overloading and flood flow due to landslide dam failure.The agreement between the computed results and measured data is encouraging.Compared to a non-well-balanced model,the well-balanced model features improved performance in reproducing stage,velocity and bed deformation.It should find general applications for non-uniform sediment transport modelling in alluvial rivers,especially in mountain areas where the bed topography is mostly irregular.     

Bottom topography,recent sedimentation and water volume of the Cerro Prieto Dam,NE Mexico

The Cerro Prieto dam, a relatively small water reservoir in NE Mexico, is one of the main resources of potable water for Monterrey, a city with a population of about four million inhabitants. A high resolution seismic study using non-linear parametric sub-bottom echo-sounder SES-2000 was carried out in this water reservoir. High resolution acoustic data interpretation shows that the thickness of recent sediments due to siltation of the reservoir reaches 3.5-4.0 m. It shows a high recent sedimentation rate (1-2 up to 14 cm/ year). Based on the echo-sounder data, the first bathymetric map and a digital model of recent sediment thickness were designed. A significant (5-12%) difference between the volume capacity value used by National Commission of Water (CNA) and acoustic survey results was revealed. Differences between the CNA and acoustic data indicate storage losses from 12-17 up to 30 million cubic meters. The results obtained through study such as this one, could be useful to improve a water resources management.     

泉州盆地地震效应特征的一维等效线性和二维非线性分析的比较

采用等效线性动粘弹性模型描述土的动力非线性特性,基于一维等效线性波传法,对泉州盆地地震效应进行了分析;同时,采用修正Martin-Seed-Davidenkov动粘弹塑性模型描述土的动力非线性特性,对泉州盆地非线性地震效应进行了大尺度二维精细化有限元分析,研究了地形地貌和土层横向不均匀性对地震效应的影响。将两种分析结果进行对比,结果表明：①随着基岩输入地震动强度增大,地表峰值加速度PGA放大效应总体呈现减小趋势,中震与小震、大震与小震的地表PGA放大系数之比依次为0.83~0.99、0.72~0.97;②该盆地Ⅲ类场地处,基岩、地表起伏不大,且土层横向分布较均匀,两种方法计算得到的地震效应特征类似;基岩或地表起伏剧烈、土层横向分布明显不均匀的Ⅱ类场地上,二维非线性分析给出的地表PGA放大系数明显大于一维等效线性结果,两种方法得到的地表加速度反应谱及PGA随土层深度的变化特征存在显著差异,二维非线性分析给出的地表加速度反应谱大多呈现双峰甚至多峰现象,且PGA在土层特定深度处存在聚集效应,使PGA随土层深度的变化呈现非单调性。     

山区公路滑坡灾害问题及对策分析--以云南元(江)磨(黑)高速公路为例

随着西部公路建设的蓬勃发展,越来越多的高等级公路必须穿越山区丘陵地带,这样必然导致大量的公路滑坡的出现,危及公路的正常运行及安全。本文以云南元(江)磨(黑)高速公路为例,在分析公路沿线自然环境条件及地质构造条件等的基础上,研究公路沿线的地质灾害的特点及危害,重点研究公路沿线所发育的滑坡的分布特征、危害、形成机制及整治对策和措施。研究表明,山区公路滑坡不仅与滑坡发育的工程地质条件有关,而且与工程设计方案及公路建设过程施工方案等人为因素有关。     

地形可视化的进展与评述

地形可视化由于具有越来越广泛的用途,越来越多地引起了大家的关注。在简要论述科学可视化、地形可视化定义及其研究内容的基础上,着重讨论了当前地形可视化的表达手段、可视化建模与技术、可视化生成工具、实时地形生成等方面的研究现状及存在的问题,最后对可视化的应用前景和发展趋势进行了展望。     

Impact of Ocean Mean Dynamic Topography on Satellite Data Assimilation

The response of an eddy-permitting ocean model to changes imposed by the use of different mean dynamic topographies (MDT) is analyzed in a multivariate assimilation context, allowing the evaluation of this impact, not only on the surface circulation, but also on the interior ocean representation. The assimilation scheme is a reduced-order sequential Kalman filter (SEEK). In a first set of experiments, high resolution sea surface temperature, along-track sea surface height and sea surface salinity from climatology are assimilated into a 1/3° resolution North and Tropical Atlantic version of the HYCOM model. In a second experiment, in situ profile data are assimilated in addition to the surface measurements.

The first set of experiments illustrates that important differences in the representation of the horizontal model circulation pattern are related to differences in the MDT used. The objective of assimilation is to improve the representation of the 3D ocean state. However, the imperfect representation of the mean dynamic topography appears to be an important limiting factor with regard to the degree of realism obtained in the simulated flow.

Vertical temperature and salinity profiles are key observations to drive a general circulation ocean model toward a more realistic state. The second set of experiments shows that assimilating them in addition to sea surface measurements is a far from trivial exercise. A specific difficulty is due to inconsistencies between the dynamic topography diagnosed from in situ observations and that diagnosed from sea surface height. These two fields obtained from different data sources do not contain exactly the same information. In order to overcome this difficulty, a strategy is proposed and validated.     

Traveling wavefront ray tracing and its applications

The current discussion of whether marine geodesy is something entirely new or part of oceanography or geodesy can be clarified by re‐examining our notions about the basic business of geodesy. This paper contends that the same basic geodetic services, which were needed for millenia to chart and control new territory, are being adapted now to the marine environment to suit modern accuracy standards. In a brief historical review it is shown that conceptually, the oceanic regions were always an integral part of geodetic concern. The oceans were certainly part of the world for the ancient map makers and for Pythagoras’ spherical earth model. Notions connected with the marine geoid were implied in ancient speculations. Distances and directions at sea, even depths, were determined to meet the requirements of the times. With the modern sophistication in geodetic theory and measuring techniques, these ideas became more refined and demanding in turn, but they were there all the time. For obvious reasons, land geodesy developed faster; marine geodesy will catch up now, because only now there is the technical capability and also an urgent economic motivation.     

Improving the Coastal Mean Dynamic Topography by Geodetic Combination of Tide Gauge and Satellite Altimetry

Abstract

The ocean mean dynamic topography (MDT) is the surface representation of the ocean circulation. The MDT may be determined by the ocean approach, which involves temporal averaging of numerical ocean circulation model information, or by the geodetic approach, wherein the MDT is derived using the ellipsoidal height of the mean sea surface (MSS), or mean sea level (MSL) minus the geoid as the geoid. The ellipsoidal height of the MSS might be estimated either by satellite or coastal tide gauges by connecting the tide gauge datum to the Earth-centred reference frame. In this article we present a novel approach to improve the coastal MDT, where the solution is based on both satellite altimetry and tide gauge data using new set of 302 tide gauges with ellipsoidal heights through the SONEL network. The approach was evaluated for the Northeast Atlantic coast where a dense network of GNSS-surveyed tide gauges is available. The typical misfit between tide gauge and satellite or oceanographic MDT was found to be around 9?cm. This misfit was found to be mainly due to small scale geoid errors. Similarly, we found, that a single tide gauge places only weak constraints on the coastal dynamic topography.     

Major Features of Topography,Geology, and Crustal Stability in the Taiwan Strait: A Scientific Approach to the Problem of the Taiwan Strait Tunnel Project

This article discusses briefly the major features of topography, geology, and crustal stability of the possible Taiwan Strait Tunnel Project (TST Project) area. Any one route of the conceived TST Project is larger than either of the English Channel Tunnel or the Seikan submarine Tunnel (Japan) by at least three times in length, and the topographic and geologic conditions are rather more complex and complicated than those of the former two projects. Moreover, the Taiwan Strait is a seismic risk area. Hence, the selection of the route of the submarine tunnel should take advantage of the favorable conditions in the topographic, geologic, seismologic, and other fields to avoid the unfavorable circumstances. At the end of the article, two supposed by comparable routes, especially the south one of TST Project are discussed.     

三维海底晕渲图绘制方法探究

根据地貌晕渲图的制作方法,结合海洋地理数据实际情况,探讨了三维海底晕渲图的制作方法;并将此方法应用于海洋基础地理数据相关项目——地理实体图集的制作。采用ArcGIS软件实现了计算机自动制作三维海底晕渲图的全过程,从最终成果可以看出平面成果图和立体成果图都富有很强立体感,这使人们对海底地形有直观认识,应用将更方便。