云南东川播卡金（铜）矿区辉绿（辉长）-钠长岩系岩相学及其成矿意义

云南播卡金（铜）矿床构造上位于小江断裂西侧,新近勘查工作表明,其金（铜）矿体的赋存于辉绿（辉长）-钠长岩系有密切的成因联系。进一步研究表明,除构造控矿因素外,岩浆热液中碱金属元素（K、Na）的活动交代也是金（铜）矿床形成的重要因素。     

序半群的（∈,∈∨q）-模糊理想刻画

从一个新的角度研究了序半群上的（∈,∈∨q）-模糊左理想、（∈,∈∨q）-模糊右理想和（∈,∈∨q）-模糊双理想,并利用这些理想给出了正则序半群的若干刻画定理。     

四川汶川地震断裂带科学钻探2号孔（WFSD-2）岩性特征和断裂带的结构

以WFSD-2钻孔岩心为研究对象,通过详细的岩心编录和岩石学、构造地质学等研究,识别出该钻孔岩心具有6段岩性,从上向下依次为彭灌杂岩（0-599.31m）、三叠系须家河组二段（599.31-1211.49m）、彭灌杂岩（1211.49-1679.51m）、三叠系须家河组三段（1679.51-1715.48m）、彭灌杂岩（1715.48-2081.47m）、三叠系须家河组四段（2081.47-2283.56m）。彭灌杂岩主要以花岗岩和火山岩为主,三叠系须家河组沉积岩以砂岩、粉砂岩、泥岩、页岩、煤层（线）和砾岩为主。3套彭灌杂岩与三叠系须家河组沉积岩重复出现,时代较老的岩性段逆冲覆盖在新的地层之上,表明龙门山构造带由一系列逆冲岩片叠置而成。岩心中断裂岩较为发育,主要为断层角砾岩、碎裂岩和断层泥,反映出脆性变形作用的特点。通过对断裂岩的统计分析,厘定了20余条产状不同、规模不等的次级断裂带,断裂带宽度和断裂密度峰值显示FZ600、FZ720、FZ782、FZ817、FZ922、FZ951、FZ1449、FZ1681、FZ2082为主要断裂带,其中FZ1681系规模最大的一条断裂。依据断裂岩的组合特征可以将岩心中断裂带的结构以断层泥为核部划分为两大类：对称型断裂带和不对称型断裂带。根据地表破裂带、WFSD-1钻孔岩心中主滑移带位置的几何关系、岩性分层等因素,可推断汶川地震主滑移带应位于FZ1134、FZ1449或FZ1681之中,同时也暗示该地区经常发生类似汶川地震的大地震活动。研究表明,龙门山地区经历了强烈的构造缩短和快速隆升作用,暗示龙门山地区构造活动非常强烈。     

含盐量对松嫩平原碳酸盐渍土抗剪强度的影响

松嫩平原分布着大量的碳酸盐渍土,其不良的工程性质给穿越其中的道路质量造成不同程度的影响。由于盐渍土所含易溶盐成分主要为碳酸氢钠,该研究通过向碳酸盐渍土内加入碳酸氢钠制备不同含盐量的盐渍土,进行室内直剪试验。试验表明：随着含盐量的增加土的粘聚力减小,内摩擦角有先减小后变大的趋势;随着含水量的增加,土的含盐量越高,土的粘聚力减小越明显。易溶盐在土中的状态形式是影响其抗剪强度参数变化的一个重要原因。     

Condensed hyperelements method of non-vertical consistent boundaries for wave propagation analysis in irregular media

The study of wave propagation in finite/infinite media has many applications in geotechnical and structural earthquake engineering and has been a focus of research for the past few decades. This paper presents an analysis of 2D anti- plane problems （Love waves） and 2D in-plane problems （Rayleigh waves） in the frequency domain in media consisting of a near-field irregular and a far-field regular part. The near field part may contain structures and its boundaries with the far-field can be of any shape. In this study, the irregular boundaries of the near-field are treated as consistent boundaries, extending the concept of Lysmer＇s vertical consistent boundaries. The presented technique is called the Condensed Hyperelements Method （CHM）. In this method, the irregular boundary is limited to a vertical boundary at each end that is a consistent boundary at the far-field side. Between the two ends, the medium is discretized with hyperelements. Using static condensation, the stiffness matrix of the far-field is derived for the nodes on the irregular boundary. Examples of the application of the CHM illustrate its excellent accuracy and efficiency.     

磁敏感加权成像临床应用和在血管瘤评估中的研究进展

磁敏感加权成像是一种近年发展的MRI新技术,在中枢神经系统疾病中的诊断及鉴别诊断中的重要作用已经得到了广大临床大夫的认可,具有很高的应用价值和拓展前景。SWI作为常规MRI检查的重要补充序列,采用3D梯度回波扫描,完全速度补偿,射频脉冲扰相等技术,具有三维、高分辨率、高信噪比的特点,可以更好地分析软组织血管瘤的结构成分,鉴别活动性出血、机化血栓、钙化及铁沉积等。而且SWI相位图能够清楚显示瘤体内部新生血管、瘤体周围静脉血管位置和形态改变,更有利于准确评估病变范围及程度,为血管瘤定位及定性诊断可以提供更多的影像信息,对于临床诊断及治疗方案的制定、预后评估都具有重要的应用价值。     

基于不同轨道高度iHCO通信卫星的CAPS星座优化研究

基于通信卫星的导航系统可以利用比地球静止轨道（Geostationary Earth Orbit,GEO）高约200 km的倾斜高圆轨道（inclined Highly Circular Orbit,iHCO）通信卫星组成导航星座.结合两种轨道高度的倾斜高圆轨道通信卫星,仿真分析了利用倾斜高圆轨道卫星组成的中国区域定位系统（Chinese Area Positioning System,CAPS）的导航性能,并讨论了利用倾斜高圆轨道卫星组成的中国区域定位系统实现中国区域覆盖的最佳星座布局.     

接收机滤波器群时延对CAPS伪距测量影响的优化研究

在中国区域定位系统（Chinese Area Positioning System,CAPS）中,带通滤波器是用户接收机的重要组成部分,对于宽频测距码来说,其群时延特性是测距的重要误差来源之一.分析了接收机码跟踪环路,给出相关函数估算测距偏差,对带通滤波器群时延开展仿真分析,并研究了改进接收机设计以优化群时延特性的方法.研究对GNSS接收机的射频和环路设计有一定借鉴意义.     

基于情景分析的天津市滨海新区地面沉降预测

鉴于地面沉降演化的地质系统渐变性特征,从主要致灾因子考虑建立地面沉降数值模型。设计3种地下水开采情景,编译计算机程序预测地下水位动态变化过程中的地面沉降值。至2020年,在最不利、适中和最理想3种情景下天津市滨海新区最大累计沉降量分别达640 mm、520 mm和150mm;全区平均累计沉降量分别达268 mm、177 mm和95 mm。     

Volume estimation of small scale debris flows based on observations of topographic changes using airborne LiDAR DEMs

This paper describes a geographic information system(GIS)-based method for observing changes in topography caused by the initiation, transport, and deposition of debris flows using highresolution light detection and ranging(LiDAR) digital elevation models(DEMs) obtained before and after the debris flow events. The paper also describes a method for estimating the volume of debris flows using the differences between the LiDAR DEMs. The relative and absolute positioning accuracies of the LiDAR DEMs were evaluated using a real-time precise global navigation satellite system(GNSS) positioning method. In addition, longitudinal and cross-sectional profiles of the study area were constructed to determine the topographic changes caused by the debris flows. The volume of the debris flows was estimated based on the difference between the LiDAR DEMs. The accuracies of the relative and absolute positioning of the two LiDAR DEMs were determined to be ±10 cm and ±11 cm RMSE, respectively, which demonstrates the efficiency of the method for determining topographic changes at an scale equivalent to that of field investigations. Based on the topographic changes, the volume of the debris flows in the study area was estimated to be 3747 m3, which is comparable with the volume estimated based on the data from field investigations.