1992-2014年河北省流动重力资料整理

系统整理河北省1992-2014年流动重力资料,利用LGADJ数据处理软件,对每期重力数据进行单期平差、多期整体平差计算,改正历史遗留问题,利用差分结果绘制145幅流动重力等值线差分图,通过具体异常点位及重力变化分析,得出：①地震前重力场变化强度与震级大小存在相关性;②流动重力观测资料地震前具有较为明显的前兆异常反应;③地震均发生在重力变化的“0”等值线附近地区。     

实时卫星钟差基准精化方法

在基于精密单点定位(PPP)的授时方法中,卫星钟差产品的高精度时间基准至关重要.针对实时卫星钟差产品时间基准不够稳定的问题,本文采用一组具有原子钟外部输入的国际全球卫星导航系统(GNSS)服务(IGS)跟踪站建立了顾及原子钟变化特性的基准精化方法.该方法首先采用阿伦方差对不同的IGS跟踪站外接原子钟进行稳定度分析,挑选出一组稳定度高的原子钟用以精化时间基准.在此基础上,利用阿伦方差分析各台原子钟的噪声参数特征,并确定不同原子钟之间的权比关系.最终,建立时间基准改正量的随机模型,并计算出精化后的时间基准.通过实例验证表明:与IGS事后精密钟差产品定义的时间基准比较,改正后的实时钟差基准单天内的标准差(STD)优于0.1 ns,相比于改正前最高提升了93%.同时,基准改正后的天内万秒稳达到10^-15量级,实现了一个量级的提高.此外,通过相对钟差精度的分析,表明钟差基准修正不影响PPP的定位精度.     

基于家庭的购物行为时、空间决策模型及其应用

基于家庭的购物行为决策的概念模型,利用2007年北京市活动日志调查的第一手数据,建立购物出发时间决策和购物目的地决策的条件Logit模型,并探讨其在相关政策评估和预测上的应用。结果发现:家庭内部相互作用和决策层面要素对购物时、空间决策的影响比较显著;早晚高峰出行的人群具有不同的社会经济属性和购物行为属性;居民休息日的购物活动集中在离家6km以内或者高密度的商业中心;影响购物目的地选择的因素更多是购物地距离,而非商业密度。通过模拟发现,土地混合利用的政策可能会增加高峰期的交通拥挤程度,而商业设施分散布局可能更有利于城市交通状况的改善和居民日常生活质量的提升。     

GPS测时的接收机自主完好性监测算法

描述了测时接收机自主完好性监测(T-RAIM)算法,给定漏检率和误警率,解算出了不同可视卫星数对应的故障检测门限值和非中心化参数,模拟卫星钟出现ramp误差和step误差两种故障情况,分析了异常卫星钟差对故障检测的检验统计量、接收机钟差及其标准差造成的影响。结果表明,T-RAIM算法能很好地解决GPS测时的完好性问题,在一定程度上保证了测时精度的稳定。     

Using reverse geocoding to identify prominent wildfire evacuation trigger points

Wildfire evacuation trigger points are prominent geographic features (e.g., ridge lines, rivers, and roads) utilized in timing evacuation warnings. When a fire crosses a feature, an evacuation warning is issued to the communities or firefighters in the path of the fire. Current methods for generating trigger buffers have limited utility because the resulting buffers are not explicitly tied to prominent geographic features, making it difficult to visually determine when a fire has breached a trigger point. This work aims to address this limitation by using reverse geocoding to identify prominent geographic trigger points that have more value to emergency managers. The method consists of three steps: 1) generate a trigger buffer using fire-spread modeling; 2) utilize online reverse-geocoding to retrieve geographic features proximal to the buffer boundary; and 3) identify the most prominent geographic features using viewshed analysis and compute the warning time each would offer given predicted fire spread rates to proximal communities. A case study of Julian, California is presented to identify prominent geographic trigger points that may have value to emergency managers in improving the timing of wildfire evacuation warnings in this region.     

软弱泥质砂岩地层中输水隧洞稳定性研究

泥质砂岩属于黏土岩,具有典型的遇水软化特征。在泥质砂岩富水地层中进行隧道开挖是地下工程的一个挑战性问题。研究了围岩软化与未软化条件下泥质砂岩地层中输水隧洞的稳定性和支护时间。首先,介绍了泥质砂岩遇水软化的力学试验结果;然后,采用基于Hoek-Brown强度准则的岩体参数评价方法,评估泥质砂岩在围岩软化与未软化条件下的力学参数;再后,以兰州水源地引水隧洞为依托工程,采用数值模拟方法对泥质砂岩隧洞软化与未软化工况的围岩稳定性进行了计算分析,得出泥质砂岩遇水软化对隧洞安全性存在显著影响;最后,采用位移收敛法,研究了泥质砂岩软化与未软化工况中,保障隧洞施工安全的合理支护时机。研究表明,泥质砂岩未软化工况中,可考虑隧道围岩初期支护在距掌子面4～5 m位置实施;而在泥质砂岩遇水软化工况中,初期支护建议在掌子面开挖后立刻支护。研究成果可为泥质砂岩地层隧洞的安全施工提供依据。     

基于FPGA的风廓线雷达信号定时器的设计和实现

详细介绍了信号定时器的特点和工作原理,并给出一种基于现场可编程门阵列(FPGA)的风廓线雷达信号定时器的设计方法.该信号定时器在某风廓线雷达中成功应用,且运行可靠,效果良好.     

What is a successful environmental geochemical study?

A successful piece of applied research will not only influence the related problem perception within the scientific community, but also lead to much better understanding of a complex challenge, including the delivery of solutions. Ideally it may contribute significantly to reducing possible risk situations for people and/or the natural environment. In short, a successful study will have a broader impact beyond the sphere of science. Planning, timing, funding, networking, communication, and interdisciplinarity are identified as key aspects for a successful project and are being examined in their scope and boundary conditions, while not neglecting the particular role of local and regional people and authorities.Defining what makes a successful environmental geochemical study is clearly based upon experience and evidence found, and not upon any particular theoretical concept. Here, experience is drawn from the outcome of many projects and specifically first-hand from the complex ARSENEX project in Minas Gerais, Brazil. Against the backdrop of both perceived and real arsenic contamination of environmental compartments, including local people, all subsequent project steps and proposals were set up using a three-prong approach that sought to a) understand the processes, b) educate and inform the public and all other stakeholders and c) remediate the situation.     

Behaviour of rigid objects during deformation and metamorphism: a test using schists from the Bolton syncline, Connecticut, USA

The behaviour of spherical versus highly ellipsoidal rigid objects in folded rocks relative to one another or the Earth’s surface is of particular significance for metamorphic and structural geologists. Two common porphyroblastic minerals, garnet and staurolite, approximate spherical and highly ellipsoidal shapes respectively. The motion of both phases is analysed using the axes of inflexion or intersection of one or more foliations preserved as inclusion trails within them (we call these axes FIAs, for foliation inflexion/intersection axes). For staurolite, this motion can also be compared with the distribution of the long axes of the crystals. Schists from the regionally shallowly plunging Bolton syncline commonly contain garnet and staurolite porphyroblasts, whose FIAs have been measured in the same sample. Garnet porphyroblasts pre-date this fold as they have inclusion trails truncated by all matrix foliations that trend parallel to the strike of the axial plane. However, they have remarkably consistent FIA trends from limb to limb. The FIAs trend 175° and lie 25°NNW from the 020° strike of the axial trace of the Bolton syncline. The plunge of these FIAs was determined for six samples and all lie within 30° of the horizontal. Eleven of these samples also contain staurolite porphyroblasts, which grew before, during and after formation of the Bolton syncline as they contain inclusion trails continuous with matrix foliations that strike parallel to the axial trace of this fold. The staurolite FIAs have an average trend of 035°, 15°NE from the 020° strike of the axial plane of this fold. The total amount of inclusion trail curvature in staurolite porphyroblasts, about the axis of relative rotation between staurolite and the matrix (i.e. the FIA), is greater than the angular spread of garnet FIAs. Although staurolite porphyroblasts have ellipsoidal shapes, their long axes exhibit no tendency to be preferentially aligned with respect to the main matrix foliation or to the trend of their FIA. This indicates that the axis of relative rotation, between porphyroblast and matrix (the FIA), was not parallel to the long axis of the crystals. It also suggests that the porphyroblasts were not preferentially rotated towards a single stretch direction during progressive deformation. Five overprinting crenulation cleavages are preserved in the matrix of rocks from the Bolton syncline and many of these result from deformation events that post-date development of this fold. Staurolite porphyroblast growth occurred during the development of all of these deformations, most of which produced foliations. Staurolite has overgrown, and preserved as helicitic inclusions, crenulated and crenulation cleavages; i.e. some inclusion trail curvature pre-dates porphyroblast growth. The deformations accompanying staurolite growth involved reversals in shear sense and changing kinematic reference frames. These relationships cannot all be explained by current models of rotation of either, or both, the garnet and staurolite porphyroblasts. In contrast, we suggest that the relationships are consistent with models of deformation paths that involve non-rotation of porphyroblasts relative to some external reference frame. Further, we suggest there is no difference in the behaviour of spherical or ellipsoidal rigid objects during ductile deformation, and that neither garnet nor staurolite have rotated in schists from the Bolton syncline during the multiple deformation events that include and post-date the development of this fold.     

中国北斗导航系统综合定位导航授时体系发展构想

对当前中美两国各自提出的弹性PNT (positioning, navigation, and timing)概念进行了深入分析, 并指出相互之间的差异和问题。特别针对未来国家综合PNT体系的主要需求特点, 从弹性概念的内涵入手, 提出PNT体系弹性能力的指标可分为外力干扰特性、内在技术特性和性能效果特性三类; 同时, 考虑到不同层次的PNT体系设计差异问题, 将PNT弹性化问题分为用户级弹性、系统级弹性和体系级弹性三个层次。笔者试图通过上述工作为中国在PNT体系领域的理论研究工作提供帮助。