基于OpenGL的多层三维空间实体叠加建模

多层三维空间实体普遍存在于现实生活中。借助于目前国际最广泛应用的三维图形接口OpenGL将其真实地显示出来，具有重要的现实意义。其中多层三维空间实体建模技术是显示过程的关键步鼻。在实现单层空间实体三维建模的基础上，利用OpenGL实现了多层三维空间实体叠加建模，叠加实现的过程及其属性数据的表示方法。     

基于自然水系网信息的元素运移分析

地面上的矿物或污染物元素主要是随水系而运移的。因此，利用自然水系网信息来定量分析元素沿水系的迁移、分散，对于地质找矿和环境保护都具有重要意义。在研究应用主概率权模拟模型产生自然水系网的基础上，提出了元素在水系网中运移的计算方法，结合所模拟出的水系网，具体分析了元素在其中的迁移、扩散情况，给出了正问题和反问题的计算结果。结果表明，正、反问题的求解具有一致性，方法是有效、可行的。     

基于预测控制的结构振动半主动控制研究

建立了半主动控制系统的理论模型，分析了半主动控制机理，并结合现代控制理论，将预测控制应用于结构半主动控制中，提出了在线预测控制算法，建立了预测模型，并成功的解决了时滞问题，最后作了计算机仿真分析，证明该系统有较好的控制效果。将预测控制思想应用于结构半主动控制中，为结构控制注入了新的思路，通过研究及仿真分析也说明了这种思想是可行的并且具有很大的发展前途。     

Modelling the effects of temperature and food on individual growth and reproduction of Daphnia and their consequences on the population level

Individual based simulations of population dynamics require the availability of growth models with adequate complexity. For this purpose a simple-to-use model (non-linear multiple regression approach) is presented describing somatic growth and reproduction of Daphnia as a function of time, temperature and food quantity. The model showed a good agreement with published observations of somatic growth (r² = 0.954, n = 88) and egg production (r² = 0.898, n = 35). Temperature is the main determinant of initial somatic growth and food concentration is the main determinant of maximal body length and clutch size. An individual based simulation was used to demonstrate the simultaneous effects of food and temperature on the population level. Evidently, both temperature and food supply affected the population growth rate but at food concentrations above approximately 0.4 mg Cl⁻¹ Scenedesmus acutus temperature appeared as the main determinant of population growth.

Four simulation examples are given to show the wide applicability of the model: (1) analysis of the correlation between population birth rate and somatic growth rate, (2) contribution of egg development time and delayed somatic growth to temperature-effects on population growth, (3) comparison of population birth rate in simulations with constant vs. decreasing size at maturity with declining food concentrations and (4) costs of diel vertical migration. Due to its plausible behaviour over a broad range of temperature (2–20 °C) and food conditions (0.1–4 mg Cl⁻¹) the model can be used as a module for more detailed simulations of Daphnia population dynamics under realistic environmental conditions.     

The design of post‐mining landscapes using geomorphic principles

Nature can provide analogues for post‐mining landscapes in terms of landscape stability and also in terms of the rehabilitated structure ‘blending in’ with the surrounding undisturbed landscape. In soil‐mantled landscapes, hillslopes typically have a characteristic pro?le that has a convex upper hillslope pro?le with a concave pro?le lower down the slope. In this paper hillslope characteristic form is derived using the area–slope relationship from pre‐mining topography at two sites in Western Australia. Using this relationship, concave hillslope pro?les are constructed and compared to linear hillslopes in terms of sediment loss using the SIBERIA erosion model. It is found that concave hillslopes can reduce sediment loss by up to ?ve times that of linear slopes. Concave slopes can therefore provide an alternative method for the construction of post‐mining landscapes. An understanding of landscape geomorphological properties and the use of erosion models can greatly assist in the design of post‐mining landscapes. Copyright © 2003 John Wiley & Sons, Ltd.     

Atomistic simulation of the structure and elastic properties of pyrite (FeS2) as a function of pressure

Interatomic potential parameters have been derived at simulated temperatures of 0 K and 300 K to model pyrite FeS₂. The predicted pyrite structures are within 1% of those determined experimentally, while the calculated bulk modulus is within 7%. The model is also able to simulate the properties of marcasite, even though no data for this phase were included in the fitting procedure. There is almost no difference in results obtained for pyrite using the two potential sets; however, when used to model FeS₂ marcasite, the potential fitted at 0 K performs better. The potentials have also been used to study the high-pressure behaviour of pyrite up to 44 GPa. The calculated equation of state gives good agreement with experiment and shows that the Fe–S bonds shorten more rapidly that the S–S dimer bonds. The behaviour of marcasite at high pressure is found to be similar to that of pyrite.     

止水帷幕在高层建筑深基坑中的应用

某高层建筑基坑西侧紧邻一道河沟,水量较大,采取三重管高压摆喷帷幕止水[1～4],施工完成后通过监测,未发现渗漏、地下水位明显下降和周围建筑物沉降现象。     

俯伪斜分段密集采煤法三维有限元数值模拟研究

俯伪斜分段密集采煤法,作为一种较新的采煤方法,在我国技术上还不很成熟,因此,首次针对京煤集团木城涧矿大台井的地质条件和赋煤状况,通过简化建立三维立体有限元模型,模拟计算了该矿煤层顶底板在开采前后运动变化情况。结果表明:煤层倾角、推采距离和开采巷道数三者是影响煤层顶底板运动规律的重要因素,得到了表征顶底板运动规律的顶底板法向最大应力和法向最大位移与三影响因素关系曲线,详细阐述了三影响因素下的煤层顶底板运动规律;同时,对现场开采中支撑压力大小,特别是在三影响因素下,超前支撑压力的作用范围与应力峰值位置进行了数值计算,并总结了其影响规律;最后,指出了该数值分析方法对现场开采将具有十分重要的应用价值和指导意义。     

从118.75 GHz附近六通道亮温反演大气温度廓线的数值模拟研究

为了能在静止气象卫星上实现微波被动遥感探测大气温度廓线,并保持一定的地面空间分辨率(如视场小于60 km),就需要使用高频微波及大天线.欧洲和美国下一代静止气象卫星上都已考虑采用118.75 GHz附近通道.为了充分了解118.75 GHz附近通道遥感反演温度廓线的能力,为仪器研制及今后资料的解释反演提供必要的基础数据,作者开展了采用118.75 GHz附近六个通道遥感反演大气温度廓线的数值模拟研究.统计反演的数值试验表明,118.75 GHz附近六通道对温度垂直分布有一定的遥感反演能力;温度反演较好的层次对应于权重函数峰值所在的位置.     

湖南省2001年夏秋季对流云降水潜力数值模拟结果

应用对流云数值模式模拟了2001年7～9月湖南省三个探空站0000和1200(世界时)462个对流云降水算例.模拟结果表明(1)其中53天的198个算例属于有利人工增雨的天气形势,133个算例的可播度大于零,54个算例的增雨率大于零;(2)7～9月天气形势有利于人工增雨日的算例,对流云平均含水量为575万吨,平均降水效率11.4%;(3)8月降水潜力大于7月,9月降水潜力最小.这表明即使大旱的2001年湖南省夏秋季对流云仍然有一定的增雨潜力.