改进的蚁群算法及其在南岭地区花岗岩侵入体探测中的应用

蚁群算法（ACO）主要应用于组合优化问题（COPs）,很少应用于地球物理重磁资料物性反演。首先,对蚁群系统中目标函数值与信息素的映射机制进行改进。理论模拟表明,改进后的Gauss模型在收敛速度和反演精度方面比传统的ant-cycle模型要好,适用于重磁资料物性反演。然后,将蚁群算法应用于南岭地区千里山岩体和九嶷山岩体重力资料反演与解释。结果表明:蚁群算法圈定的花岗岩岩体与地面地质填图结果及大地电磁测深反演结果吻合,较好地控制了千里山岩体和九嶷山岩体的深度和形状。该结果可为研究南岭地区花岗岩侵入模式和多金属成矿规律提供参考。     

基于粒子群算法优化小波支持向量机的岩土力学参数反演

常用的确定岩土力学参数的方法有原位测试和室内试验两种,但都存在一定的局限性,参数选择的合理与否,对设计计算及数值模拟分析结果的有效性影响很大。支持向量机法在理论基础和求解算法方面都具有明显优势,为确保岩土力学参数取值的合理性,采用支持向量机法对岩土力学参数进行反演。先通过小波分析理论构造出支持向量机的核函数,再用粒子群算法(PSO)分别优化Morlet小波、Mexico小波和RBF函数的支持向量机模型参数,通过小波支持向量机模型建立反演参数与沉降值间的非线性映射关系。根据正交试验和均匀试验对需反演的岩土力学参数进行设计,结合有限元软件进行计算分析,得到学习样本和测试样本。分别采用Morlet小波、Mexico小波和RBF函数得出的预测结果和原始数据进行对比分析,发现采用Morlet小波核函数预测效果更佳。使用Morlet小波核函数预测的参数输入到Midas模型中计算建筑物最终沉降量,比较计算值与实际监测值,其相对误差不超过8.1%。研究结果表明,该方法在岩土工程参数的反演中具有良好的应用价值,对今后岩土力学参数的确定及校核提供了一种新方法。     

干旱半干旱地区农田土壤NO3-N深层积累及其影响因素

以长期试验资料为基础,着重分析了干旱半干旱地区农田系统中施肥、作物、降水、耕作措施以及土壤类型和特性对产生土壤NO3-N深层积累的影响.分析发现,氮肥的过量施用和400～800 mm降水量偏低是导致干旱半干旱地区土壤NO3-N积累在100～300 cm土层的主要因素.随着氮肥用量的增加,NO3-N深层积累显著增加;氮磷配施有助于降低其积累量.不同作物对氮素的吸收利用效率也是影响NO3-N深层积累的因素,作物之间的轮作方式会有效降低NO3-N深层积累;休闲期种植合理植物可有效降低NO3-N深层积累.NO3-N深层积累主要产生在质地较重的土壤上,带正电荷粘土矿物对NO3-N吸附是导致热带土壤中NO3-N积累的主要因素.深入研究深层积累NO3-N的生物有效性、迁移变化机理、与作物根系之间的关系以及对土壤性状和环境的影响具有重要意义.     

Hydro-thermal performance of multilayer capillary barriers in arid lands

In this study, a capillary barrier system was designed and tested for an arid land environment. To simulate arid land conditions of high temperature and sub-irrigation systems, the barrier was subjected to thermal and hydraulic gradients in opposite directions; to test the barrier system under these severe conditions, an experimental apparatus was designed and fabricated. The multilayer capillary barrier consisted of three layers made of silica sand, a mixture of sand and bentonite in equal portions, and a mixture of clay (25%) and aggregate (75%). Several one dimensional coupled heat and moisture tests were performed. Temperature variations along the thickness of the barrier were recorded as a function of time, and at the end of each test, the barrier was sliced into small sections, for the determination of volumetric water content as a function of distance from the heat source. The experimental results were discussed in view of the barrier's intended purpose of its ability to store moisture for long time durations. Coupled heat and moisture flow equations were developed and solved numerically via a finite difference method. Diffusivity parameters were calculated by using experimental results, a numerical model, and Powell's conjugate directions method of nonlinear optimization. The model was calibrated and the results were discussed. Good agreement between calculated and experimental results was obtained. This revised version was published online in July 2006 with corrections to the Cover Date.     

大青山造山带中基底再造杂岩的特征及其指示意义

大青山造山带中基底再造杂岩主要由高温韧性剪切变形变质作用的糜棱片麻岩类、部分重烙作用形成的混合岩化糜棱片麻岩类及太古宙地壳残块三部分组成。进一步研究表明该基底再造条岩不仅可以作为一个特定的构造岩性单元,属于造山带根部地壳的一部分,而且其中前两部分既不属于太古富变质上壳岩和侵入岩系,也不属于早元古代变质上亮岩,而是早元古代造山带演化过程中,变形变质作用和部分重熔作用对太古宙基底综合改造作用的产物。基底再造杂岩的研究为进一步探讨前寒武纪克拉通内硅铝壳造山作用的性质、规模和成因机制提供了极为重要的地质证据和信息。     

宇宙尘似文象结构的图像分析和成因探讨

宇宙尘较广泛地分布于各地质时代和各种岩石中,它形成在不同的物理化学环境下,因此具有比较复杂的结构构造。本文对产于不同时代、不同岩性岩石中具有似文象结构的宇宙尘进行了广泛的研究,一方面研究Si、Al等元素的赋存状态,另一方面研究这些元素与似文象结构的关系,进一步为它们的成因提供信息。     

安山岩中黄铜矿矿石分析和制硫酸铜工艺的研究

安山岩中的黄铜矿是庐江中生代陆相火山热液型铜矿床的原生矿，矿石中主要伴生黄铁矿及少量斑铜矿、赤铁矿和褐铁矿。物相分析结果，黄铜矿的粒度很细，只有细磨才能单体解离；它在矿石中分布极不均匀，且与脉石矿物接触疏松，适于粗磨抛尾。物性分析结果，黄铜矿在４００～５３０℃、斑铜矿在４５０～６００℃、黄铁矿在５００～６８０℃氧化分解。实验研究表明，矿石经磨碎磁选，大部分的粗粒级的铁矿物能够回收；粗磨抛尾可获得铜、硫的粗精矿；然后再经硫酸化焙烧、酸浸、过滤、提纯、浓缩结晶可制得工业级硫酸铜。浸渣做炼铁原料，黄钾铁矾做Ｆｅ２Ｏ３颜料，有时还可回收金、银。     

计算机内存的分类及优化管理

本文从计算机应用角度出发，介绍了计算机内存的基本结构及其类型内存配置对计算机工作的影响，同时讨论了如何合理计算机内存，以便充分发挥计算机的优势。     

Characteristics of Triassic epithermal Au mineralization at the Q prospect,Chatree mining area,Central Thailand

The Chatree deposit is located in the Loei‐Phetchabun‐Nakhon Nayok volcanic belt that extends from Laos in the north through central and eastern Thailand into Cambodia. Gold‐bearing quartz veins at the Q prospect of the Chatree deposit are hosted within polymictic andesitic breccia and volcanic sedimentary breccia. The orebodies of the Chatree deposit consist of veins, veinlets and stockwork. Gold‐bearing quartz veins are composed mainly of quartz, calcite and illite with small amounts of adularia, chlorite and sulfide minerals. The gold‐bearing quartz veins were divided into five stages based on the cross‐cutting relationship and mineral assemblage. Intense gold mineralization occurred in Stages I and IV. The mineral assemblage of Stages I and IV is characterized by quartz–calcite–illite–laumontite–adularia–chlorite–sulfide minerals and electrum. Quartz textures of Stages I and IV are also characterized by microcrystalline and flamboyant textures, respectively. Coexistence of laumontite, illite and chlorite in the gold‐bearing quartz vein of Stage IV suggests that the gold‐bearing quartz veins were formed at approximately 200°C. The flamboyant and brecciated textures of the gold‐bearing quartz vein of Stage IV suggest that gold precipitated with silica minerals from a hydrothermal solution that was supersaturated by boiling. The δ¹⁸O values of quartz in Stages I to V range from +10.4 to +11.6‰ except for the δ¹⁸O value of quartz in Stage IV (+15.0‰). The increase in δ¹⁸O values of quartz at Stage IV is explained by boiling. P_H2O is estimated to be 16 bars at 200°C. The f_CO2 value is estimated to be 1 bar based on the presence of calcite in the mineral assemblage of Stage IV. The total pressure of the hydrothermal solution is approximately 20 bars at 200°C, suggesting that the gold‐bearing quartz veins of the Q prospect formed about 200 m below the paleosurface.     

鹅湖岩体岩石谱系单位的建立及其就位机制分析

鹅湖岩体为S型花岗岩 ,具有结构和成分演化序列。运用岩石结构序列法 ,将其划分为 5个单元 ,归并为 1个超单元。按侵入体空间展布形式、岩体地质学、岩石学、构造等资料 ,探讨了岩体就位机制