国内外钼资源供需形势分析

全面、系统地建立钼矿石、钼矿粉分析方法,对钼元素研究开发和保障钼矿工业发展具有重要意义。目前多采用酸溶或碱熔样品后进行分析,其不足是测定钼含量的范围窄,消耗样品量大,还需使用大量酸碱,且受仪器限制,分析高含量钼时多需对样品溶液进行数次稀释,使分析步骤更加繁琐。发射光谱法则可避免上述问题,但用之准确分析高含量钼矿石钼矿粉尚有测试方法的瓶颈需要突破。本文研究通过内标元素、分析线对、缓冲剂配比、电流程序等环节的实验分析,建立了固体进样-交流电弧发射光谱法测定钼矿石中高含量钼的分析方法：优化样品与光谱缓冲剂质量比至1∶2,优化分析线对,截取曝光时间35s,采用以国家一级合成硅酸盐光谱分析标准物质和国家一级矿石标准物质组成的自研标准系列制作标准曲线,由全谱交直流电弧发射光谱仪自动扣除分析线和内标线背景后以对数坐标二次曲线拟合计算,使测定范围扩展为500～500800μg/g,检出限为27.38μg/g,相对标准偏差（RSD）为3.28%～8.30%,相对误差为-0.43%～0.73%。结果表明,本文方法在实现绿色分析的同时,在检出限相当、精密度合格的条件下,一次性分析高含量钼的上限从5%提高至50%。

     

2015年济南地区雾霾天气过程大气物理量特征初步分析

文中对比分析了2015年29个雾、霾及雾霾混合天气过程中,章丘探空站L波段探空雷达和山东省气象局院内德国14通道地基微波辐射计观测的温度资料。对观测数据实施了质量控制,检验了精度和可信度,统计分析了宏观物理参量特征和日变化规律。针对雾、霾及雾霾天气过程各选取了一个个例进行分析,分析了大气中PM_2.5、PM₁₀、SO₂、NO₂、O₃、CO含量的变化情况,分析了相对湿度、液态水路径和综合水汽含量等的变化情况。结果表明:两种观测数据一致性较好,拟合优度高于0.97;贴地逆温层存在一定的季节变化,悬垂逆温层存在一定的差异,逆温层的变化、污染参量变化与雾霾的形成有密切关系;不同天气背景对大气物理参量有较大的影响,PM₁₀、AQI（空气质量指数）和CO均在相同时间段出现峰值,有明显的起伏;CO峰值雾霾天气中尤为明显,由早到晚随时间峰值逐渐增大,雾天和霾天峰值较小,雾霾天气明显大于雾天或霾天。     

基于DSC模型的房屋开裂评估与监测分析

城市隧道下穿时,普遍存在着地表房屋变形超限、倾斜开裂等安全风险问题,而且当前针对房屋变形开裂的计算分析、风险评估研究,也严重滞后于实际工程的需要。通过综合分析、比选,以及单、三轴试验验证表明：DSC（disturbed state concept）本构模型能够较好地描述材料开裂后力学行为;采用该模型并结合厦门机场路隧道下穿建筑群的工程实践,对地表建筑群开裂进行定量评估,评估结果与现场房屋裂缝监测、变形监测结果一致性良好。同时,对照扰动变量与实际房屋开裂的对应关系,发现扰动变量可以作为房屋开裂的定量安全指标,进一步即可以建立房屋变形开裂的过程控制标准,从而使隧道下穿过程中每个关键施工部、每个时段,地表房屋变形开裂程度、开裂风险都可以进行量化评估。     

地理国情监测技术路线研究

针对目前地理国情监测过程中遇到的信息采集涉及行业广、种类多、工作繁琐等问题,该文提出了一种新的技术路线,并详细探讨了不同部门、不同行业信息的获取方式。对于基础地理信息采集时地理国情及地表覆盖分类中存在的特殊道路、特殊河流、特殊房屋信息难以采集的情况,给出具体采集办法,提高了采集效率和采集精度;规范地理国情监测框架要求的其他部门、行业信息采集标准,并针对数据量大、类型复杂、调用部门多等问题,提出以云数据库存储数据,解决了后期数据库需多次扩展问题。通过分析与研究表明:此技术路线具有良好的可行性,采用此技术路线可有效采集地理信息并进行数据整合。     

力觉临场感遥操作机器人(1):技术发展与现状

人机交互式机器人作为最具实用价值的特种机器人已成为当前机器人学研究的前沿和热点.临场感(Telepresence)技术是人机交互的核心.首先,回顾了力觉临场感遥操作机器人技术的产生、发展和现状,介绍了力觉临场感遥操作机器人在核领域、空间探测领域与远程医疗领域的应用情况;其次,对力觉临场感遥操作机器人的4大关键技术:传感技术、力反馈与触觉再现技术、大时延控制技术和虚拟预测环境建模技术等进行了综述;还介绍了东南大学仪器科学与工程学院机器人传感与控制研究所近20年来开展临场感遥操作机器人技术研究,以及在核探测、康复医疗领域应用的情况.通过回顾与分析,指出了力觉临场感遥操作机器人技术今后需要研究的几个重点问题.     

Further birth records of elephant seals Mirounga leonina in New Zealand (note)

The second and third recorded births of southern elephant seals Mirounga leonina on the mainland of New Zealand occurred at Kaikoura in mid‐October 1976. One female pup died within 14 d of birth and the other (sex unknown) disappeared from the region with its mother on 19 November 1976.     

Macrophyte management: An integrated perspective

A concept of aquatic macrophyte management that integrates the positive and negative aspects of vegetation in lakes and rivers is discussed. This integrated approach involves three factors: macrophyte control, macrophyte enhancement, and identification and resolution of the conflicts created by multiple use of a waterbody. The primary decision in macrophyte management programmes must be whether to optimise for single‐purpose or for multipurpose use of the waterbody. Both technical (macrophyte control and enhancement) and social (conflict resolution) procedures are required to solve problems associated with the macrophyte status of multipurpose waterbodies.     

高真空击密法在软地基处理中的应用

姑合工程实践,介绍快速“高真空击密法”软地基处理方法的施工原理、施工工艺及质量控制等,并简单阐述“高真空击密法”在进行软地基处理中的优点。     

Coherent control of non-resonant two-photon transition in molecular system

In this paper, we study theoretically and experimentally the coherent control of non-resonant two-photon transition in a molecular system (Perylene dissolved in chloroform solution) by shaping the femtosecond pulses with simple phase patterns (cosinusoidal and π phase step-function shape). The control efficiency of the two-photon transition probability is correlated with both the laser field and the molecular absorption bandwidth. Our results demonstrate that, the two-photon transition probability in a molecular system can be reduced but not completely eliminated by manipulating the laser field, and the control efficiency is minimal when the molecular absorption bandwidth is larger than twice the laser spectral bandwidth.     

Pipe laying simulation with an active reel drive

Dynamic and quasi-static models for analysis of a pipe lay spread are presented in the paper. Depending on the type of a pipe, spooling it on a big drum (reel) may cause plastic deformations. When the pipe is reeled out at sea, again it undergoes plastic deformations. In order to model such a nonlinear behaviour, a model, which includes both elasto-plastic material characteristics and large deformations, is required. Discretisation of the pipe is performed by means of the Rigid Finite Element Method (RFEM), which allows us to study static and dynamic problems, taking into account required properties of the model. Different sea conditions are simulated and analysed. It is shown how operational conditions can limit the ability of laying operation by a dedicated vessel, due to an unstable system response. The second part of the paper presents an upgrade of a passive reel drive by application of an active drive. In the model used for control applications, the pipe is modelled by a neural network. This allows us to perform a real-time calculations. In this fast-response calculation model, nonlinear aspects of the system are taken into account. The improvements in a pipe laying vessel performance are presented by some results of numerical simulations. The conclusions are also formulated.