Transition Periods Between Sea Ice Concentration and Sea Surface Air Temperature in the Arctic Revealed by an Abnormal Running Correlation

This study used the synthetic running correlation coefficient calculation method to calculate the running correlation coefficients between the daily sea ice concentration(SIC) and sea surface air temperature(SSAT) in the Beaufort-Chukchi-East Siberian-Laptev Sea(BCEL Sea), Kara Sea and southern Chukchi Sea, with an aim to understand and measure the seasonally occurring changes in the Arctic climate system. The similarities and differences among these three regions were also discussed. There are periods in spring and autumn when the changes in SIC and SSAT are not synchronized, which is a result of the seasonally occurring variation in the climate system. These periods are referred to as transition periods. Spring transition periods can be found in all three regions, and the start and end dates of these periods have advancing trends. The multiyear average duration of the spring transition periods in the BCEL Sea, Kara Sea and southern Chukchi Sea is 74 days, 57 days and 34 days, respectively. In autumn, transition periods exist in only the southern Chukchi Sea, with a multiyear average duration of only 16 days. Moreover, in the Kara Sea, positive correlation events can be found in some years, which are caused by weather time scale processes.     

一维综合孔径微波辐射计遥感海面温度的敏感性分析

一维综合孔径微波辐射计能够有效提高观测的空间分辨率,其观测入射角通常在0°~55°范围内变化。为了开发适用于一维综合孔径微波辐射计的海面温度反演算法,需要评估其观测亮温对海洋大气环境要素的敏感性。利用海面发射率模型和大气辐射传输模型,构建了适用于一维综合孔径微波辐射计的微波海洋大气辐射传输模式,研究了C波段垂直和水平极化微波辐射亮温在不同入射角下对海洋大气环境要素的敏感性变化情况,并定量计算了相应的敏感系数。结果表明:垂直和水平极化亮温对海洋大气环境要素的敏感性表现出不同的特性。随着入射角的增大,垂直极化亮温对海面温度的敏感性增强,对海面风场的敏感性相对减弱;水平极化亮温则相反。由大气水汽含量和云液态水含量误差引入的垂直和水平极化亮温误差随入射角增大而增大,但是,即使在55°的大入射角下垂直和水平极化亮温误差仍小于0.12 K。对于海面温度反演精度优于1 K的要求,一维综合孔径微波辐射计的测温精度需优于0.6 K。研究结果对于一维综合孔径微波辐射计海面温度反演算法的研究和载荷设计具有一定的理论指导意义。     

An improved building detection approach using L-band POLSAR two-dimensional time-frequency decomposition over oriented built-up areas

The objective of this study is to efficiently extract detailed information about various man-made targets in oriented built-up areas using polarimetric synthetic aperture radar (POLSAR) images. This paper develops an improved approach for building detection by utilizing Two-Dimensional Time-Frequency (2-D TF) decomposition. This method performs outstandingly in distinguishing between man-made and natural targets based on the isotropic behaviors, frequency-sensitive responses, and scattering mechanisms of objects. The proposed method can preserve the spatial resolution and exploit the advantages of TF decomposition; specifically, the exact outlines of buildings can be effectively located, and more types of features (e.g., flat roofs, roads, and walls that are oblique to the radar illumination) can be distinguished from forests in complex built-up areas by 2-D TF decomposition. The coarser-resolution subaperture images that are produced in the azimuth direction, which correspond to different looking angles, are beneficial for detecting man-made structures with main scattering centers oriented at oblique angles with respect to the radar illumination. In the range direction, the obtained subaperture images, which correspond to various observation frequencies, can be helpful in distinguishing flat roofs and roads from forests. This method was successfully implemented to analyze both NASA/JPL L-band AIRSAR and L-band EMISAR data sets. The building detection results of the proposed method exhibit a significant improvement over those of other methods and reach an overall accuracy over 80%, with approximately 20% higher than the accuracies of K-means clustering and the entropy/alpha-Wishart classifier and approximately 10% higher than the accuracy of the support vector machine method. Moreover, building details can be precisely detected, obliquely oriented buildings can be identified, and the distinction between buildings and forests is significantly improved, as both visually and statistically indicated. This method is highly adaptable and has substantial application value.     

Sentinel-1A SAR影像及其在矿区地面沉降监测中的应用研究

详细介绍了Sentinel-1A SAR影像数据的基本参数、工作模式、应用领域等。利用2016.11.09—2017.03.09的5景Sentinel-1A C波段SAR影像数据进行矿区地面沉降监测试验。基于SARscape利用双轨D-In SAR技术进行差分干涉处理,得到了研究区地面沉降分布图,直观地再现了研究区在2016.11.09—2017.03.09的沉降分布、沉降量级等。结果表明济宁某矿区在监测期间地面相对稳定,未有大面积和大量级的地面沉降发生,4个干涉对监测到的最大沉降都未超过3 cm。     

SAR image despeckling with a multilayer perceptron neural network

Speckle noise in synthetic-aperture radar (SAR) images severely hinders remote sensing applications; therefore, the appropriate removal of speckle noise is crucial. This paper elaborates on the multilayer perceptron (MLP) neural-network model for SAR image despeckling by using a time series of SAR images. Unlike other filtering methods that use only a single radar intensity image to derive their parameters and filter that single image, this method can be trained using archived images over an area of interest to self-learn the intensity characteristics of image patches and then adaptively determine the weights and thresholds by using a neural network for image despeckling. Several hidden layers are designed for feedforward network training, and back-propagation stochastic gradient descent is adopted to reduce the error between the target output and neural-network output. The parameters in the network are automatically updated in the training process. The greatest advantage of MLP is that once the despeckling parameters are determined, they can be used to process not only new images in the same area but also images in completely different locations. Tests with images from TerraSAR-X in selected areas indicated that MLP shows satisfactory performance with respect to noise reduction and edge preservation. The overall image quality obtained using MLP was markedly higher than that obtained using numerous other filters. In comparison with other recently developed filters, this method yields a slightly higher image quality, and it demonstrates the powerful capabilities of computer learning using SAR images, which indicate the promising prospect of applying MLP to SAR image despeckling.     

RS和GIS支持下的生态风险评估——以塔里木河下游为例

目前为止,生态风险评估还没有一套完整的方法体系。本文以我国最大的内陆河-塔里木河下游区段为研究区域,将遥感、地理信息系统等先进技术手段与模糊数学方法相结合,根据ERA框架和层次分析思想建立塔河下游植被的生态风险评估指标,运用模糊综合评判的方法进行塔河下游植被生态风险的遥感定量评估;在评估结果的基础上进行可视化分析。结果表明:在流域生态风险评估缺乏有效的定量评估方法的情况下,Fuzzy集合论与AH P方法结合的模糊综合评判方法是可行的,具有较高的科学性;运用遥感、地理信息系统等先进的技术手段,实现了评估结果的定性、定量和可视化。     

基于SAR干涉点目标分析技术的城市地表形变监测

通过深入研究干涉点目标的相位模型,提出基于空间搜索的邻近点目标干涉相位差解缠方法,用以计算点目标的地形残差和线性形变,以及分离点目标大气延迟相位和非线性形变相位的时空域滤波方法,解决干涉点目标分析中的关键问题.最后,以苏州地区地表沉降监测为应用试验,利用形成的SAR干涉点目标形变信息提取技术,获取苏州市区1992-2002年间的地表沉降信息.研究结果与已有文献记录保持比较好的一致性,证明SAR干涉点目标技术完全可以发展成为应用于城市地表形变监测的实用化技术.

Abstract：

Interferometric point target analysis (IPTA) is one of the latest developments in radar interferometric processing. It is achieved by analysis of the interferometric phases of some individual point targets, which are discrete and present temporarily stable backscattering characteristics, in long temporal series of interferometric SAR images. This paper analyzes the interferometric phase model of point targets, and then addresses two key issues within IPTA process. Firstly, a spatial searching method is proposed to unwrap the interferometric phase difference between two neighboring point targets. The height residual error and linear deformation rate of each point target can then be calculated, when a global reference point with known height correction and deformation history is chosen. Secondly, a spatial-temporal filtering scheme is proposed to further separate the atmosphere phase and nonlinear deformation phase from the residual interferometric phase. Finally, an experiment of the developed IPTA methodology is conducted over Suzhou urban area. Totally 38 ERS-1/2 SAR scenes are analyzed, and the deformation information over 3 546 point targets in the time span of 1992-2002 are generated. The IPTA-derivecl deformation shows very good agreement with the published result, which demonstrates that the IPTA technique can be developed into an operational tool to map the ground subsidence over urban area.     

基于边缘分析的海面溢油检测

提出一种基于边缘检测的快速溢油信息提取方法, 首先对溢油图像进行ROA(radio of average)边缘检测, 根据检测结果进行AOI(area of interest)提取, 然后使用改进的Weibull-CFAR检测算法对AOI进行溢油检测, 并与全局CFAR检测结果进行对比。实验结果证明, 所提出的方法对于非均匀灰度SAR图像溢油检测准确性较好、效率较高, 特别适用于大图像的快速溢油检测。     

全极化SAR数据反演桥面高度

根据高分辨率SAR图像上建筑区的影像特征, 提出了基于灰度共生矩阵(gray-level cooccurrence Matrix, GLCM)纹理分析的建筑区提取方法, 该方法由初步定位和边界调整2个步骤组成, 均遵循特征计算、基于Bhattacharyya距离的特征选择和KNN分类流程, 所不同的是2个步骤中分别采用了逐块和逐点计算纹理特征的方式以兼顾纹理分析的效率和准确性。文中对不同SAR传感器获取的图像进行了实验。实验结果表明, 选用具有最大Bhattacharyya距离值的3或4个特征可以获得较好的初步定位结果, 建筑区的检测率超过80%, 虚警率低于10%;随着边界调整的进行, 检测到的建筑区边界逐渐接近于真实边界。实验结果验证了该算法的有效性。     

一种多孔径SAR图像目标检测方法

提出了一种多孔径SAR图像目标检测方法,充分利用SAR图像幅度和相位信息来区分人造目标和杂波。由于人造目标的回波能量往往集中在部分方位角范围内,当该部分方位角范围所对应的多个子孔径图像中存在目标时,其局部相关性较强,因此,该方法利用多个子孔径图像之间的相干系数检测目标。实验结果表明,该方法有效地提高了目标检测概率,同时降低了虚警概率。