高坪-吉心段公路喀斯特工程地质综合勘察

以沪蓉国道主干线湖北省高坪-吉心段的喀斯特地质勘察工作为例，探讨喀斯特地区公路工程地质综合勘察的基本方法。在喀斯特地区运用遥感和地理信息技术技术、地质测绘、综合物探以及地质钻探等勘察手段，通过综合分析各种勘探成果，能够较准确地查明可溶岩的分布、喀斯特形态类型、分布规律、控制因素以及喀斯特水的赋存、分布和运移规律等，并根据不同的喀斯特地貌提出了有针对性的处理对策。通过不断的实践和经验总结。针对喀斯特工程地质问题合理运用综合工程勘察方法，能做出科学的分析评价，可以适应喀斯特区公路建设的需要，并且供今后在喀斯特地区修建公路时参考和借鉴。     

一种利用测井资料预测岩石可钻性的计算机方法

介绍了一种利用测井资料快速求得岩石可钻性级值的计算机方法。该方法能够比较准确地预测岩石可钻性，快速做出连续的地层可钻性剖面图。室内微钻头可钻性试验和江汉油田现场应用验证表明：该系统具有比较高的可靠性，是可以投入油田现场应用的。     

MODIS 1B影像几何纠正方法研究及软件实现

MODIS影像是一种新型和重要的数据。对MODIS 1B影像几何畸变原因进行了深入分析，选择了一种合适的纠正方法。对于1km分辨率MODIS 1B影像，直接采用1km分辨率的空间坐标进行几何纠正；对于250m和500m分辨率的MODIS 1B影像，先用三次样条曲线对坐标进行插值生成同分辨率的坐标，然后利用坐标插值结果对其进行几何纠正。由于MODIS影像在空问分布上的特殊性，采用前向和后向映射相结合的方式确定纠正后某一像素点在原始影像中的位置。根据该位置的条带重叠度，可以确定参与计算像素个数、搜索窗口的大小以及窗口的精确位置；采用归一化反距离加权插值法计算纠正后像素点的属性值。上述优化算法不仅保证了纠正后影像的质量，而且提高了数据处理速度。作者在Visual C 6．0环境下开发实现了上述算法。从坐标插值和几何纠正结果分析，无论是数据处理速度还是纠正后的影像质量和精度均达到要求。     

让“测量工具箱”帮助您

从工作实际出发,将测量过程中常用的计算和换算工作,用VisualBasic语言编写成计算程序,最后将各模块集成为一个“测量工具箱”,从而方便了测量工作者处理日常工作中的一些计算和换算问题。     

The conditionality of status: Experience-based reflections on the insider/outsider issue

When a researcher undertakes research into his/her own ethnic group, issues of positionality abound. These issues relate not only to the impact of inherent insider positionality when interacting with study participants but also in the interpretation and presentation of study findings. My research with contemporary Irish immigrants not only reinforced the advantages of being an insider but also highlighted the incomplete and unstable nature of insiderness. Heterogeneity within the study group, in terms of their geo-political, regional and religious origins, meant that presumptions of insiderness and outsiderness were frequently challenged. A new awareness of the conditionality of each positionality was forged from these experiences.     

Image processing of 2D resistivity data for imaging faults

A methodology to locate automatically limits or boundaries between different geological bodies in 2D electrical tomography is proposed, using a crest line extraction process in gradient images. This method is applied on several synthetic models and on field data set acquired on three experimental sites during the European project PALEOSIS where trenches were dug. The results presented in this work are valid for electrical tomographies data collected with a Wenner-alpha array and computed with an l₁ norm (blocky inversion) as optimization method. For the synthetic cases, three geometric contexts are modelled: a vertical and a dipping fault juxtaposing two different geological formations and a step-like structure. A superficial layer can cover each geological structure. In these three situations, the method locates the synthetic faults and layer boundaries, and determines fault displacement but with several limitations. The estimated fault positions correlate exactly with the synthetic ones if a conductive (or no superficial) layer overlies the studied structure. When a resistive layer with a thickness of 6 m covers the model, faults are positioned with a maximum error of 1 m. Moreover, when a resistive and/or a thick top layer is present, the resolution significantly decreases for the fault displacement estimation (error up to 150%). The tests with the synthetic models for surveys using the Wenner-alpha array indicate that the proposed methodology is best suited to vertical and horizontal contacts. Application of the methodology to real data sets shows that a lateral resistivity contrast of 1:5–1:10 leads to exact faults location. A fault contact with a resistivity contrast of 1:0.75 and overlaid by a resistive layer with a thickness of 1 m gives an error location ranging from 1 to 3 m. Moreover, no result is obtained for a contact with very low contrasts (1:0.85) overlaid by a resistive soil. The method shows poor results when vertical gradients are greater than horizontal ones. This kind of image processing technique should be systematically used for improving the objectiveness of tomography interpretation when looking for limits between geological objects.     

Distribution of chlorophyll-a off the Changjiang River and its dynamic cause interpretation

Red tide,also called harmful algal bloom interna-tionally,is a disaster abnormal phenomenon of oceanecology with an explosive breed or dense assemble ofone or several phytoplanktons in a specific ocean en-vironment condition,colors the seawater,influencesand harms ocean living things.The formation of redtide is controlled mainly by a complex interplay ofbiological,physical and chemical processes,but themost main cause influencing the occurrence of red tideis the seawater eutrophication,i.e.,the…     

工程勘察设计行业信息化建设问题反思及其新领域应用开发综述

本文通过对勘察设计行业信息化建设的深入思考,总结并提出了在设计院信息化建设七个领域应用开发的新思路。     

对工程勘察信息化的几点认识

从信息技术的角度看,工程勘察实际上是一种“信息获取、信息理解和信息应用”的过程。作为一项技术和服务,工程勘察的信息化应由工程勘察业务信息化和工程勘察管理信息化两方面组成。工程勘察信息化的作用包括信息化辅助业务和管理、信息化支撑业务和管理以及信息化提升业务和管理三个层次。当前,有必要对工程勘察企业信息化的模式、工程勘察业务信息化提升的方式和工程勘察信息化的标准化等问题做进一步研究,以推动工程勘察信息化向深度和广度发展。     

工程勘察设计信息集成化系统的实施状况及其思考

国家建设部“全国工程勘察设计行业2000～2005年计算机应用工程及信息化发展规划纲要”发布后,备受工程设计企业关注,但推行情况却不甚理想。本文通过阐述信息集成化系统的主要任务和目标,分析其应用状况,寻求推广受阻原因,提出了开发该系统的思路和改善其实施环境的建议。