Optimal Compensation and Implementation for Adaptive Optics Systems

This paper develops a compensation algorithm based on Linear–Quadratic–Gaussian (LQG) control system design whose parameters are determined (in part) by a model of the atmosphere. The model for the atmosphere is based on the open-loop statistics of the atmosphere as observed by the wavefront sensor, and is identified from these using an auto-regressive, moving average (ARMA) model. The (LQG) control design is compared with an existing compensation algorithm for a simulation developed at ESO that represents the operation of MACAO adaptive optics system on the 8.2 m telescopes at Paranal, Chile. This revised version was published online in July 2006 with corrections to the Cover Date.     

The Expansion of the Distance Between Two Arbitrary Gravitating Points as Applied to Specific Models of Celestial Bodies

For the complete system of biharmonic functions a suitable representation in spheroidal coordinates is found. It is used for expanding the distance between two arbitrary gravitating points and its inverse quantity in appropriate series. Such expansions can be of interest and useful in a number of problems of celestial mechanics and stellar dynamics.     

基于CTI技术的守时系统故障报警实现

介绍了计算机电话集成(CTI-Computer Telephony Integration)技术在守时系统故障自动报警中的应用。简要介绍了构成报警系统的两个关键产品，电话语音卡和TTS(Text-To-Speech)，详细讨论了ActiveX控件(Phonic．OCX)编程接口的一系列事件和方法以及由此而开发的故障报警模块。该模块不仅用于守时主系统的故障报警，也将用于电源系统、钟房环境监控系统的故障报警。     

智能照明系统在现代建筑照明中的应用研究

在对传统照明系统和智能照明系统进行对比分析的基础上,剖析了智能照明系统的控制策略,并结合实际的工程应用,着重讨论了基于ABB I-Bus产品的智能照明控制系统的实现,结果表明该系统具有高效、便捷、节约能源等优点.同时,还对系统与建筑物楼宇自控系统问的系统集成方式进行了研究.     

Design of a high update-rate star sensor for arcsec-level attitude determination from balloon-borne X/γ astronomy platforms

This paper describes the design of a star sensor based upon a high dynamic range CCD in order to reach an arcsec-level attitude determination in balloon-borne missions. A custom star identification software was developed and laboratory-tested on a prototype assembled using commercial components. A set of numerical simulations have been carried out to study the dependence on the pointing precision of the centroid position accuracy, the number of detected stars and the effect of the image focusing. Moreover, the role of the electronic noise and the discrete pixel structure on the light signals is identified by the analysis of numerical simulations. Laboratory tests confirm that the arcsec pointing accuracy with a 1 Hz update rate can be achieved with our combination of custom-developed software and selected hardware components.     

Is Precipitation the Dominant Controlling Factor of High Inorganic Nitrogen Content in the Changjiang River and Its Mouth？

The main reasons for the high content of inorganic N and its increase by several times in the Changjiang River and its mouth during the last 40 years were analysed in this work. The inorganic N in precipitation in the Changjiang River catchment mainly comes from gaseous loss of fertilizer N, N resulting from the increases of population and livestock, and from high temperature combustions of fossil fuels. N from precipitation is the first N source in the Changjiang River water and the only direct cause of high content of inorganic N in the Changjiang River and its mouth. The lost N in gaseous form and from agriculture non-point sources fertilizer comprised about 60% of annual consumption of fertilizer N in the Changjiang River catchment and were key factors controlling the high content of inorganic N in the Changjiang River mouth. The fate of the N in precipitation and other N sources in the Changjiang River catchment are also discussed in this paper.     

模糊PID控制器在水压机控制系统中的应用

介绍了模糊控制中的设计思想及方法，并采用模糊控制的方法来改进实际生产中PID控制的一些控制难点。将改进方法应用在一大型水压机控制系统中并在实际生产中取得了理想效果。     

三峡地区地形变监测与区域地壳稳定性分析

利用三峡地区多年的地形变观测资料，分析了该区的地形变特征。结果表明，各断层活动性甚微或基本不活动，区域地壳相对稳定     

单片机在卫星天线控制系统中的应用

主要介绍卫星天线控制系统中天线旋转定位控制的软硬件设计和实现。该部分的主要功能是：接收红外遥控器的信号；检测前面板上的按键信号；检测传感器反馈的信号；根据所得信号作出相应的动作。     

Application of stress release models to historical earthquakes from North China

Univariate and multivariate stress release models are fitted to historical earthquake data from North China. It is shown that a better fit is obtained by treating separately the Eastern part of the region, including the North China Plain and Bohai Sea, and the Western part of the region, including the Ordos Plateau and its Eastern boundary. Further improvement is obtained by fitting the large events (M7.6) and smaller events in the Western region by different stress release models. The comparisons are made by computing the likelihoods of the fitted models and discounting the number of parameters used by Akaike's AIC criterion. The models are used to develop long-term risk scenarios for the East and West regions.