高分辨率遥感影像并行分割结果缝合算法

采用基于数据并行的遥感影像分割实现过程,提出了一种新的数据缝合算法解决分割结果合并问题。分割效果对比和运算效率分析等实验结果表明,此算法保持了分割结果合并后的边界正确性,使并行化分割在提高运算效率的同时保证了分割结果的可信度。     

通化地区老岭群花山组与珍珠门组平行不整合的发现及意义

通化地区珍珠门组并非老岭群的顶部层位,其上确实存在花山(大栗子)组、临江组．并且与珍珠门组呈平行不整合接触。这一发现,为重新厘定集安岩群、老岭群的地层层序以及区域地层对比．提供了直接的地质依据,也为老岭群的古地理再造以及地质构造演化研究提供了新资料;同时也为在这一地区寻找古岩溶型矿产提供了重要线索。     

A semi‐distributed parallel‐type linear reservoir rainfall‐runoff model and its application in Taiwan

The main purpose of this paper is to introduce a semi‐distributed parallel surface rainfall‐runoff conceptual model. In this paper, a general solution of the instantaneous unit hydrograph (IUH) has been derived successfully for N linearly connected reservoirs, each having a different storage constant. The solution is a function of geomorphologic parameters, meteorologic factors and roughness coefficients. The model also takes into account the hydrologic response which is influenced by outflow downstream of a reservoir. For calibration, the shuffled complex evolution (SCE) algorithm is used to search for the global optimal parameters of the model. Because of the parallel structure, the mean roughness parameter of the channel becomes a “conceptual” parameter without a real physical meaning. To evaluate the adaptability of the model adopted, three watersheds around the city of Taipei in Taiwan were chosen to test the effectiveness of the model. The study provides an appropriate rainfall‐runoff model for planning flood mitigation in Taiwan. Copyright © 1999 John Wiley & Sons, Ltd.     

Experimental Study on Cross-Flow Induced Vibrations in Heat Exchanger Tube Bundle

Vibration in heat exchangers is one of the main problems that the industry has faced over last few decades. Vibration phenomenon in heat exchangers is of major concern for designers and process engineers since it can lead to the tube damage, tube leakage, baffle damage, tube collision damage, fatigue, creep etc. In the present study, vibration response is analyzed on single tube located in the centre of the tube bundle having parallel triangular arrangement (60°) with P/D ratio of 1.44. The experiment is performed for two different flow conditions. This kind of experiment has not been reported in the literature. Under the first condition, the tube vibration response is analyzed when there is no internal flow in the tube and under the second condition, the response is analyzed when the internal tube flow is maintained at a constant value of 0.1 m/s. The free stream shell side velocity ranges from 0.8 m/s to 1.3 m/s, the reduced gap velocity varies from 1.80 to 2.66 and the Reynolds number varies from 44500 to 66000. It is observed that the internal tube flow results in larger vibration amplitudes for the tube than that without internal tube flow. It is also established that over the current range of shell side flow velocity, the turbulence is the dominant excitation mechanism for producing vibration in the tube since the amplitude varies directly with the increase in the shell side velocity. Damping has no significant effect on the vibration behavior of the tube for the current velocity range.     

高性能GIS研究进展及评述

互联网技术的发展使地理信息技术得到了前所未有的发展和应用,地理信息计算呈现出计算速度快、运行效率高、应用多样化的发展特征。而随着计算机硬件性能飞速提升,传统的GIS数据处理方式并不能与之匹配,各种缺陷与弊端逐渐显现,亟待更高效的数据处理方式。目前,以并行集群计算技术和分布式网络技术为代表的高性能计算的出现,为这些问题的解决带来了新思路,并逐渐发展形成了新一代的多核并行高性能计算系统。当前,如何利用新型硬件体系结构带来的计算能力,研究新一代高性能GIS计算系统,解决现在所面临的时空数据密集和计算密集问题成为重要挑战。高性能计算是基于一组或几组计算机系统组成的集群,通过网络连接组成超级计算系统以加强数据处理、分析计算性能的一种技术。在实际应用中,逐渐形成Hadoop,Spark和Storm 3大主流分布式高性能计算系统,它们三者各具优缺点。本文从高性能GIS算法、并行GIS计算、内存计算和众核计算4个方面梳理、归纳总结了高性能GIS的技术体系,分析了每类高性能GIS技术特征,综合分析、评述了近年来高性能GIS的研究进展,并对高性能GIS未来发展进行展望,为更完备、高效的高性能GIS体系的建立、发展和应用提供参考。今后,并行GIS计算、高性能计算模式和分布式存储仍然是GIS技术领域发展的重要方向,通过高性能GIS系统可有效地解决时空数据密集、计算密集和网络通讯密集等问题,大大提升GIS地理分析效率。     

景观指数的并行计算方法

随着地理信息科学和系统的发展,GIS数据的时空分辨率和数据量呈现爆炸式的增长趋势。传统的基于个人计算机的景观指数计算软件难以有效快速地完成海量数据的空间分析。针对该问题,本文提出了一个高效的景观指数并行计算方法。首先对原有的并查集连通域标记算法进行了2点改进：① 在第2次遍历数据时,增加了计算斑块面积、周长等斑块基本信息的功能,为景观指数的计算提供必要参数;② 在第2次遍历过程中,增加了重新标记连续序号的功能,减少了原有算法在合并操作后造成的序号不连续,需要重新遍历数据的开销。在此基础上,本文利用MPI并行编程库,采用数据分割和主从进程协同的并行计算模式实现了景观指数的并行计算。实验表明,在保证计算正确性的基础上,本文的并行算法大幅度提高了景观指数的计算性能,为快速分析大规模数据的景观形态和格局提供了有效手段。     

Dynamic FE simulation of four‐story steel frame modeled by solid elements and its validation using results of full‐scale shake‐table test

Dynamic finite element analyses of a four‐story steel building frame modeled as a fine mesh of solid elements are performed using E‐Simulator, which is a parallel finite element analysis software package for precisely simulating collapse behaviors of civil and building structures. E‐Simulator is under development at the National Research Institute for Earth Science and Disaster Prevention (NIED), Japan. A full‐scale shake‐table test for a four‐story frame was conducted using E‐Defense at NIED, which is the largest shaking table in the world. A mesh of the entire structure of a four‐story frame with approximately 19 million degrees of freedom is constructed using solid elements. The density of the mesh is determined by referring to the results of elastic–plastic buckling analyses of a column of the frame using meshes of different densities. Therefore, the analysis model of the frame is well verified. Seismic response analyses under 60, 100, and 115% excitations of the JR Takatori record of the 1995 Hyogoken‐Nanbu earthquake are performed. Note that the simulation does not reproduce the collapse under the 100% excitation of the Takatori record in the E‐Defense test. Therefore, simulations for the 115% case are also performed. The results obtained by E‐Simulator are compared with those obtained by the E‐Defense full‐scale test in order to validate the results obtained by E‐Simulator. The shear forces and interstory drift angles of the first story obtained by the simulation and the test are in good agreement. Both the response of the entire frame and the local deformation as a result of elastic–plastic buckling are simulated simultaneously using E‐Simulator. Copyright © 2014 John Wiley & Sons, Ltd.     

Finite‐element analysis of laminated rubber bearing of building frame under seismic excitation

Finite element analysis is carried out for a building frame supported by laminated rubber bearings to simultaneously investigate global displacement and local stress responses under seismic excitation. The frame members and the rubber bearings are discretized into hexahedral solid elements with more than 3 million degrees of freedom. The material property of rubber is represented by the Ogden model, and the frame is assumed to remain in elastic range. It is shown that the time histories of non‐uniform stress distribution and rocking behavior of the rubber bearings under a frame subjected to seismic excitation can be successfully evaluated, and detailed responses of base and frame can be evaluated through large‐scale finite element analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

基于图形处理器的伪谱和高阶有限 差分混合方法地震波数值模拟

伪谱和高阶有限差分混合方法, 在垂直方向采用交错网格有限差分算子, 利用其并行程度高的特点, 在水平方向采用伪谱算子, 保留其高精度的优势, 是计算地震波场的有效方法. 图形处理器(graphic processing unit, 简写为GPU) 由于其高度并行性, 在计算此类问题中有显著的优势. 由英伟达(NVIDIA)公司推出的统一计算设备架构(compute unified device architecture, 简写为CUDA)平台极大地简化了GPU编程的难度. 为提高计算效率, 本文实现了基于CUDA 平台的混合方法二维地震波场模拟. 然后基于二维均匀介质模型将CPU与GPU版本的运行时间进行对比. 实际测试结果表明, 基于CUDA 的并行模拟方法在保证计算精度的同时显著地提高了计算速度, 为开展大规模非均匀地球介质地震波传播数值模拟提供了一种可选的方法.      

基于N-KD树的空间点数据分组算法

随着科学技术的进步,地理空间数据的分析处理面临着数据量膨胀和计算量高速增长的双重挑战,为了解决海量数据处理速度慢的问题,本文针对空间分布不均匀的点数据,从数据并行的角度,以保持数据的空间邻近性及保证数据分组后各组数据量负载均衡为目标,提出基于N-KD树（Number-K Dimension Tree）数据动态分组的方法,其是一种面向实时变化（数据量和数据空间范围变化）的空间数据动态分组方法。该方法借鉴K-D树的创建和最临近点搜索的思想,通过方差判断数据分布稀疏程度,利用最临近点搜索方法处理边界点,实现空间范围的不均等切分,保证数据分组后各组数据量基本均衡。试验表明,该方法具有较好的动态分组效果与较高的计算效率;支持各种分布状态的空间点数据的分组;分组后各组数据量负载均衡;分组算法本身有支持并行、支持分布式协同工作模式的特点。