体应变仪大地震时两次自动调零数据的处理

仪器在较大波动幅度的影响下产生自动调零（电磁阀门开启）,与地震信息混在一起,难以直接使用原始数据。合理消除自动调零带来的影响,还原真实情况,成为台站必须解决的问题。采用确定校正值的方法,力图还原为连续记录,结果发现：处理后的资料可以和另外一台没有调零动作的体积应变仪器的原始资料相符合。     

Long-term Sensor Drift Found in Recovered Argo Profiling Floats

We recovered three Argo profiling floats after 2 to 2.5 years of operation, and recalibrated their temperature, conductivity, and pressure sensors. The results demonstrate that these floats exhibited a significant drift in salinity of −0.0074 to −0.0125, primarily due to the conductivity sensor drift. Combined with the recalibration result for another previously recovered float, the indication is that the negative salinity drift increases nearly in proportion to the operating period of floats. The increasing rate is −0.0041 (±0.0015) year⁻¹, which yields a salinity drift of −0.016 (±0.006) for the expected float lifetime of four years. The present result suggests that reducing the float surfacing time would improve the accuracy of the salinity measurements.     

Impact of road‐generated storm runoff on a small catchment response

The impact of road‐generated runoff on the hydrological response of a zero‐order basin was monitored for a sequence of 24 storm events. The study was conducted in a zero‐order basin (C1; 0·5ha) with an unpaved mountain road; an adjacent unroaded zero‐order basin (C2; 0·2 ha) with similar topography and lithology was used to evaluate the hydrological behaviour of the affected zero‐order basin prior to construction of the road. The impact of the road at the zero‐order basin scale was highly dependent on the antecedent soil‐moisture conditions, total storm precipitation, and to some extent rainfall intensity. At the beginning of the monitoring period, during dry antecedent conditions, road runoff contributed 50% of the total runoff and 70% of the peak flow from the affected catchment (C1). The response from the unroaded catchment was almost insignificant during dry antecedent conditions. As soil moisture increased, the road exerted less influence on the total runoff from the roaded catchment. For very wet conditions, the influence of road‐generated runoff on total outflow from the roaded catchment diminished to only 5·4%. Both catchments, roaded and unroaded, produced equivalent amount of outflow during very wet antecedent conditions on a unit area basis. The lag time between the rainfall and runoff peaks observed in the unroaded catchment during the monitoring period ranged from 0 to 4 h depending on the amount of precipitation and antecedent conditions, owing mainly to much slower subsurface flow pathways in the unroaded zero‐order basin. In contrast, the lag time in the roaded zero‐order basin was virtually nil during all storms. Copyright © 2009 John Wiley & Sons, Ltd.     

Coupled HM analysis using zero‐thickness interface elements with double nodes—Part II: Verification and application

In a companion Part I of this paper (Int. J. Numer. Anal. Meth. Geomech. 2008; DOI: 10.1002/nag.735 ), a coupled hydro‐mechanical (HM) formulation for geomaterials with discontinuities based on the finite element method (FEM) with double‐node, zero‐thickness interface elements was developed and presented. This Part II paper includes the numerical solution of basic practical problems using both the staggered and the fully coupled approaches. A first group of simulations, based on the classical consolidation problem with an added vertical discontinuity, is used to compare both the approaches in terms of accuracy and convergence. The monolithic or fully coupled scheme is also used in an application example studying the influence of a horizontal joint in the performance of a reservoir subject to fluid extraction. Results include a comparison with other numerical solutions from the literature and a sensitivity analysis of the mechanical parameters of the discontinuity. Some simulations are also run using both a full non‐symmetric and a simplified symmetric Jacobian matrix. On top of verifying the model developed and its capability to reflect the conductivity changes of the interface with aperture changes, the results presented also lead to interesting observations of the numerical performance of the methods implemented. Copyright © 2008 John Wiley & Sons, Ltd.     

Bernese�������������̬��λ����

??Bernese??????ж??ο???????????????????????t??????λ??????λ??,??????????13??????????2013\|07\|23??29?????????е??????????GPS??λ????????????????????????λ???????cm??????????λ???????mm??????     

Weed preference and growth of young grass carp in New Zealand

In each of eight 5‐day pond experiments carried out at intervals over a year, 0+ to 1 +‐year‐old grass carp, Ctenopharyngodon idella Val., were offered a choice of at least 10 species of water weeds from the Rotorua area. Water temperature was measured each day. Food selectivity decreased with increasing temperature and size of fish, but preference for the weeds did not change. At summer temperatures the fish ate much weed and grew at about 4g/fish/day, but in winter little food was taken and growth was slow.     

Diel patterns of mysid drift (Crustacea: Mysidacea) in the Taieri River estuary,New Zealand

Drifting mysids were sampled to determine diel activity, and whether mysid numbers vary with respect to inflowing and outflowing tides. Samples of drifting mysids were collected at the mouth of the Taieri River, New Zealand, over one 24‐h cycle using five replicate conical drift nets in January 1999. One‐night and 1‐day ebb and flood tide were each sampled. Four species of mysid Tenagomysis macropsis, T. novae‐zealandiae, T. robusta, and an apparently undescribed species of Gastrosaccus sp., were collected over the sampling period. One species, T. robusta, has not previously been collected from estuarine or riverine systems. The undescribed Gastrosaccus sp. was the most abundant of the four species. All four species were more abundant at night, with T. robusta and Gastrosaccus sp. being considerably more abundant in the drift on outflowing tides. In contrast, roughly equal numbers of T. macropsis and T. novae‐zealandiae were observed drifting in and out of the estuary at night.     

北斗静态定位实验与精度分析

通过实际测试,将北斗和GPS进行对比,了解北斗静态定位的实际定位精度情况。按照E级网测试的结果表明,北斗和GPS定位的平面点位平均中误差分别为2．51mm和0．75mm,证明北斗系统和GPS的平面定位精度基本在同一量级上,能够满足静态定位测量的需要。     

整数模糊度参数的快速检索算法

ＧＰＳ快速定位中,由于模糊度参数之间的强相关性,模糊度参数置信区间定义的检索区域比相应的置信椭球大得多。本文通过模糊度参数向量的正交变换,定义出包含模糊度参数置信椭球的最小正交多面体,借助在其中构造的均匀正交网格点,找出置信椭球中的所有整数模糊度参数向量。该方法显著地减少了整数模糊度参数的检索范围,提高了计算效率。     

SEQUENTIAL STIFFNESS DESIGN FOR SEISMIC DRIFT RANGES OF A SHEAR BUILDING–PILE–SOIL SYSTEM

A shear building supported by a prescribed pile–soil system is subjected to bedrock earthquake input. A new design procedure is presented for generating a sequence of stiffness designs satisfying the constraints on interstorey drifts. The mean peak interstorey drifts of the shear building subjected to a set of spectrum-compatible ground motions at the bedrock are evaluated by a modal combination rule. Tuning of the fundamental natural period of a shear building with a fixed base with that of a shear beam ground results in a non-monotonic sequence of stiffness designs with respect to a ground stiffness parameter and previous approaches cannot be applied to such a problem. This difficulty in finding such a non-monotonic sequence is overcome by utilizing the ground stiffness parameter and the superstructure stiffness parameter alternately in multiple design phases and by developing a new multi-phase perturbation technique. Fundamental characteristics of this sequence of stiffness designs and the effect of ground stiffnesses on the design of the shear building are disclosed. It is further shown that the stiffness contour method is also useful for the design procedure such that a scattering effect in the estimates of ground stiffnesses is taken into account. The usefulness of the proposed procedure of sequential stiffness design and contour line method is demonstrated through several sequential design examples.