关于修改港工钢筋混凝土规范小偏心受压构件正截面强度计算的建议

本文提出在小偏心受压构件正截面强度计算中，取消弯曲抗压强度ｆｃｍ（Ｒｗ），采用轴心抗压强度ｆｃ，这与构件的实际破坏形态相符。对小偏心受压构件正截面强度计算提出了设计建议。特别是对工程上大量应用的矩形截面对称配筋小偏压构件提示了简捷的设计方法，与以往的近似计算方法相比具有物理概念明确，精度高，方法简捷的特点。     

Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.     

16米风化砂回填地基的深层振密加固

结合北方某重力式深水 ( -1 6.0 m)码头沉箱后壁 1 4.5 m范围的回填风化砂经深层振密处理这一工程实例 ,介绍了回填砂振密的技术要求、施工工艺和方法及振密效果的检测。同时对施工与检测中的某些技术问题提出了自己的看法。     

Variability of organic δC and C/N in the Mersey Estuary, U.K. and its implications for sea-level reconstruction studies

Microfossil analysis (e.g. diatoms, foraminifera and pollen) represents the cornerstone of Holocene relative sea-level (RSL) reconstruction because their distribution in the contemporary inter-tidal zone is principally controlled by ground elevation within the tidal frame. A combination of poor microfossil preservation and a limited range in the sediment record may severely restrict the accuracy of resulting RSL reconstructions. Organic δ¹³C and C/N analysis of inter-tidal sediments have shown some potential as coastal palaeoenvironmental proxies. Here we assess their viability for reconstructing RSL change by examining patterns of organic δ¹³C and C/N values in a modern estuarine environment. δ¹³C and C/N analysis of bulk organic inter-tidal sediments and vegetation, as well as suspended and bedload organic sediments of the Mersey Estuary, U.K., demonstrate that the two main sources of organic carbon to surface saltmarsh sediments (terrestrial vegetation and tidal-derived particulate organic matter) have distinctive δ¹³C and C/N signatures. The resulting relationship between ground elevation within the tidal frame and surface sediment δ¹³C and C/N is unaffected by decompositional changes. The potential of this technique for RSL reconstruction is demonstrated by the analysis of part of an early Holocene sediment core from the Mersey Estuary. Organic δ¹³C and C/N analysis is less time consuming than microfossil analysis and is likely to provide continuous records of RSL change.     

动力定位系统发展状况及研究方法

动力定位系统（Dynamic Positioning System)是一种闭环的控制系统，其采用推力器来提供抵抗风、浪、流等作用在船上的环境力，从而使船尽可能地保持在海平面上要求的位置上，其定位成本不会随着水深增加而增加，并且操作也比较方便。本文对动力定位系统发展及各组成部分进行了介绍，以期对动力定位系统有个比较完整的认识。     

GPS在计算导弹脱靶量中的应用研究

将GPS技术应用于导弹靶试脱靶量测量,并对计算过程作了较为详细的分析和探讨。试验证明：利用GPS测定脱靶量,测量精度高,简单易行,可以在靶场逐步试验推广。     

基于小波变换的单频GPS快速精密定位整周模糊度的解算

对于GPS短基线,载波相位双差观测量已基本消除了卫星轨道误差、钟差、大气折射误差等系统偏差的影响,主要包含距离观测量信息及随机测量误差,其中测量误差是高频的测量噪声,小波变换可将GPS载波相位双差观测量中的观测噪声(高频部分)分解出来。本文利用Coiflets小波基函数对GPS快速定位的原始载波相位双差观测量进行5层分解,通过重构第5层低频系数获得去除噪声的"干净"的载波相位双差观测量,然后利用"干净"的双差观测量进行最小二乘参数估计,以减小测量噪声对GPS快速定位病态方程解的扰动。计算结果表明该方法能够显著提高GPS快速定位中模糊度浮点解的精度,仅利用几个观测历元的数据就可以准确地固定模糊度。     

GNSS three carrier ambiguity resolution using ionosphere-reduced virtual signals

This paper presents a general modeling strategy for ambiguity resolution (AR) and position estimation (PE) using three or more phase-based ranging signals from a global navigation satellite system (GNSS). The proposed strategy will identify three best “virtual” signals to allow for more reliable AR under certain observational conditions characterized by ionospheric and tropospheric delay variability, level of phase noise and orbit accuracy. The selected virtual signals suffer from minimal or relatively low ionospheric effects, and thus are known as ionosphere-reduced virtual signals. As a result, the ionospheric parameters in the geometry-based observational models can be eliminated for long baselines, typically those of length tens to hundreds of kilometres. The proposed modeling comprises three major steps. Step 1 is the geometry-free determination of the extra-widelane (EWL) formed between the two closest L-band carrier measurements, directly from the two corresponding code measurements. Step 2 forms the second EWL signal and resolves the integer ambiguity with a geometry-based estimator alone or together with the first EWL. This is followed by a procedure to correct for the first-order ionospheric delay using the two ambiguity-fixed widelane (WL) signals derived from the integer-fixed EWL signals. Step 3 finds an independent narrow-lane (NL) signal, which is used together with a refined WL to resolve NL ambiguity with geometry-based integer estimation and search algorithms. As a result, the above two AR processes performed with WL/NL and EWL/WL signals respectively, either in sequence or in parallel, can support real time kinematic (RTK) positioning over baselines of tens to hundreds of kilometres, thus enabling centimetre-to-decimentre positioning at the local, regional and even global scales in the future.     

Low multipath antennas for GNSS-based attitude determination systems applied to high-altitude platforms

High-altitude platforms (HAPs) are a flexible and attractive technology for providing innovative wireless services. These aerial platforms can be successfully employed for mobile or broadband communications and for disaster monitoring or response. However, one of the open issues is whether HAP stations can provide reliable services without temporal outages owing to stratospheric winds that can cause positional and attitude instabilities thus affecting the communication system operation. To counteract this issue, one possible solution is to use reconfigurable antennas whose pointing direction can be adjusted depending on the platform spatial orientation. However, this would require real-time three-axial attitude data. As a possible solution, this paper will review the potential of GNSS-based attitude determination systems with reference to HAP stations. In particular, it will be shown how the use of a particular class of low multipath and lightweight antennas can provide a high degree of accuracy without altering the avionic ballast.     

一种时空数据静态可视化表达方法

本文简要介绍了时空数据可视化的必要性,以及目前人们采用的时空数据可视化方法,并分析了这些方法的局限性,提出了一种将年轮(annual ring)作为时空载体,结合视觉变量对面状地物的属性数据进行静态可视化的方法。该方法将面状地物的同心环按照类似树木年轮的生长特征进行划分,作为空间和时间的载体,不同时期属性数据映射到相应的同心环中,同心环的厚度和色彩的差异揭示了属性数据的变化。最后以武汉市城市管理网格化平台的统计评价数据为例实现了对比率量表数据的时态可视化表达。本文所提出的静态时空可视化方法将面状地物的空间、属性和时间紧密地结合在一起,克服了以往静态可视化方法中时间-空间、时间-属性相分离的不足,试验证明了这种方法在实践中的可行性。