川西前陆盆地中—新生代沉积迁移与构造转换

川西前陆盆地中—新生代各构造层的残余厚度展布和沉积特征分析发现,四川克拉通周缘的前陆盆地在晚三叠世时期发育于龙门山山前,明显属于龙门山褶皱逆冲构造载荷所形成的前渊凹陷;侏罗纪早期的沉积地层呈面状分布,没有表现出显著的挠曲沉降,指示了一个构造相对平静的阶段;中侏罗世早期前渊凹陷迁移至龙门山北段和米仓山山前,前渊沉积从晚三叠世的北东向转换为近东西向,广泛的湖泊相沉积预示了前陆盆地的欠充填状态;中侏罗世中晚期,川西盆地沉降中心又迁移到大巴山山前,相应的挠曲变形又从近东西向转化为北西向,构成了大巴山的前渊凹陷;晚侏罗世—早白垩世时期,沉降中心再次回到米仓山山前,巨厚的前渊凹陷沉积指示了米仓山冲断带的主要活动时期;白垩纪末—古近纪的前渊凹陷则跃迁至雅安—名山地区。川西前陆盆地的同造山沉降中心以四川盆地中心为核心在西部和北部呈弧形迁移,沉积序列不断更替和叠加。中生界各构造层底界构造图显示现今的构造低部位位于川西北地区和川西南地区,在川西北地区均有东西走向的等值线分布,而川西南地区等值线走向则为北东-南西向。因此分析认为,晚侏罗世至早白垩世的构造变形可能控制了川西盆地现今的地层变形,形成了川西北地区的南北向构造挤压结构,而晚期的新生代构造变形则主要体现在川西盆地的西南部,形成北东-南西向的地层展布特征。     

秦山核电站邻近水域的流况分析

本文分析了秦山核电站邻近水域各测站的实测流、潮流和佘流分布及季节变化。结果表明:测区内潮流为非正规丰日浅海潮流,其运动形式呈往复流。核电站二期工程取水口附近(L_1,18站)为一大流速区,而一期工程出水口周围(L_2,L_2′站)有一相对小的流速区。大流速区落潮流历时大于涨潮流历时,而相对小流速区则相反;大流速区的余流较小,而小流速区的余流大。在四个季节中,涨潮流速秋季最大,春季次之,夏季最小;落潮流速秋季最大,夏季次之,春季最小。余流冬、秋两季较大。在实测流中以潮流为主,径流和季风的作用也相当显著。     

机载雷达高度计对海况及海面风速的测量研究

运用我国自行研制的ＺＨＧ－１型Ｘ波段机载雷达高度计于１９９５年４月１３日－４月１８日在青岛附近海域进行的海上飞行实验数据，及导出的均方根波高、有效波高、均方根波陡算法模型，得到了上述海况参数值。     

沿海城市海水入侵问题研究

近年来，沿海城市的海水入侵问题逐渐成为人们关心的焦点之一。文章通过资料搜集与整理，对沿海城市的海水入侵状况作了全面描述与分析。系统地总结了海水入侵的若干特点及海水入侵的成因分析与规律，较为详细的分析了海水入侵的基本事实、基本矛盾和各发展阶段的发展原因，在此基础上总结了海水入侵的基本理论。为进一步的研究打下良好的基础。     

A Note on Soil Structure Resistance of Natural Marine Deposits

It has been well documented that natural normally-consolidated marine soils are generally subjected to the effects of soil structure. The interpretation of the resistance of soil structure is an important issue in the theory study and engineering practice of ocean engineering and geotechnical engineering. It is traditionally considered that the resistance of soil structure gradually disappears with increasing stress level when the applied stress is beyond the consolidation yield stress. In this study, however, it is found that this traditional interpretation of the resistance of soil structure can not explain the strength behavior of natural marine deposits with a normally-consolidated stress history A new interpretation of the resistance of soil structure is proposed based on the strength behavior. In the preyield state, the undrained strength of natural marine deposits is composed of two components: one developed by the applied stress and the other developed by the resistance of soil structure. When the applied stress is beyond the consolidation yield stress, the strength behavior is independent of the resistance of soil structure.     

A probability distribution for depth-limited extreme wave heights in a sea state

A model for the depth-limited distribution of the highest wave in a sea state is presented. The distribution for the extreme wave height is based on a probability density function (pdf) for depth-limited wave height distribution for individual waves [Méndez, F.J., Losada, I.J., Medina, R. 2004. Transformation model of wave height distribution. Coastal Eng, Vol. 50, 97:115.] and considers the correlation between consecutive waves. The model is validated using field data showing a good representation of the extreme wave heights in the surf zone. Some important statistical wave heights are parameterized obtaining useful expressions that can be used in further calculations.     

水下滑翔器的运动建模与分析

介绍了水下滑翔器的工作机理，对其沉浮阶段的滑翔过程进行了动力学分析，推导了滑翔器在垂直剖面上的动力学方程。论文深入分析了水下滑翔器稳态时的运动规律，以水下滑翔器试验模型为例，推导了其稳态运动参数，通过线性化与适当的简化，得到模型在垂直剖面上的运动状态方程，讨论了系统的可控性与可观测性，为水下滑翔器系统的开发设计和控制提供了理论依据，具有重要的指导意义。     

N,N-二烷基酰胺类物质的膜状态及其在水面溢油集油剂中的应用研究

合成了 5种 N,N-二烷基酰胺型表面活性剂 ,并对其所成膜的状态进行了测定。表明当N,N-二烷基酰胺类物质单独成膜时获得的集油膜为多层膜 ,而当选用合适的溶剂与其配制成溶液以后 ,所成的集油膜则为转变膜或液态凝聚膜。在 5种 N,N-二烷基酰胺类物质中 ,酰基碳链越长、氮烷基碳链越短则其集油能力越强。应用 N,N-二烷基酰胺类物质配制了 4个配方 ,均具备良好的集油能力 ,并且对原油的集油能力大于对柴油的集油能力     

天然矿泉水特殊组分的地球化学初步研究

本文以ＧＢ８５３７－８７《饮用天然矿泉水国家标准》为依据，从理论上阐述了天然矿泉水特殊组分（锂、氡、锶、铁、锌、溴、氟、碘、钼、偏硅酸、偏硼酸、硒、二氧化碳）的物理化学性质，分布、岍存形式及迁移规律，以便对我国矿泉水勘察和开发能有所裨益。     

Analysis of Offshore Oil Pipeline Floating Laying

-Based on the calculation model for the floating laying of the offshore oil pipeline, this paper analyses in detail the internal force, and deformation of the pipeline under a definite structural form (pipeline and buoy) and the way of pulling. The obtained results can be used for the buoy deployment, structure design, and the determination of pulling parameters (the pulling force of the cable and its length, etc.), providing an effective analysis method for floating pipeline-laying. A calculation example is given to show the related calculation process and the main results are analyzed and discussed.