基于Logistic和Gompertz曲线模型拟合的建筑物沉降分析

重大工程建设一般会有定期的沉降和变形监测,本研究利用具有规律变化的Logistic和Gompertz曲线模型进行拟合,并以某大型发电厂为研究对象,利用近15年的监测数据,建立预测模型并进行精度评估。研究结果表明,若监测数据具有一定程度的稳定性,并对计算时监测数据进行合理取舍,对采取的全区、分区平均值或单一点高度值的检测数据,运用Logistic和Gompertz曲线模型来预测大型建筑物的沉降情况是可行的。     

采用弯曲进行道路化简冲突避免的方法

针对道路化简后可能导致要素间空间关系前后不一致的问题,提出了一种采用弯曲进行道路化简冲突避免的方法。首先,以弯曲为单元分析道路化简前后弯曲的形态变化规律,对化简过程产生的要素间空间冲突类型进行了归纳和总结;其次,基于道路弯曲与要素之间的空间关系,提出了相应的冲突判别规则;最后,利用弯曲化简的可控性和弯曲组的间接化简策略实现对化简冲突的避免。试验表明,该方法能有效地识别和避免道路化简产生的空间冲突,确保化简前后道路与其他要素空间关系的一致性。     

一种迭代法的圆曲线拟合方法

针对在实际测量工作中量测圆心坐标及半径时存在的问题,该文基于迭代法的思想,推导了一种圆曲线拟合的方法,并用实例数据进行了检验。结果显示,该方法在离散点均匀采集或非均匀采集的情况下均具有良好的拟合效果,与目前在圆曲线拟合方法中普遍采用的最小二乘法相比,具有同样高的拟合精度,验证了该拟合方法的正确性与可行性。     

一种曲线拟合圆心坐标算法及精度分析

针对在工程应用中,经常需要根据某些圆形物体上的离散点求取其圆心坐标,而采用何种算法简单易行,其精度又与哪些因素有关的相关研究较少的问题,该文提出一种利用曲线拟合求取圆心坐标的简洁算法,并编程实现。然后采用模拟仿真结合统计分析的方法评估了该算法在不同条件下的拟合精度,得出测点误差越大,拟合精度越低;测点个数越多,分布越均匀,拟合精度越高;圆半径对拟合精度影响甚小等结论。在某工程项目中使用该算法得到的结果精度较高,验证了其有效可行,且与采用其他方法得到的坐标值较为接近,说明了该算法的可靠性高。     

Modification of strain wedge method for lateral soil-pile interaction in sandEI北大核心CSCD

A modified strain wedge (SW) method for analyzing the behavior of laterally loaded single piles in sand is proposed. The modified model assumes that the lateral displacements of a pile behind the three-dimensional passive soil wedge are nonlinear, which makes the horizontal soil strain variable with depths instead of a constant value in the original strain wedge model, and also employs two different hyperbolic models, one for describing horizontal stress increment-strain behavior of soil in the wedge, and the other for describing the shear stress-displacement property at the interface between soil and pile shafts. An example is analyzed to demonstrate the effectiveness of the modified method, and a good agreement is obtained. Finally, the effects of modifications on the lateral bearing capacity of pile shafts are discussed. The results show that the problem of overestimating the lateral bearing capacity of piles with strain wedge method can be ameliorated by introducing the assumption of nonlinear lateral displacements of piles. It makes the SW method more convenient and effective in analyzing the behavior of laterally loaded piles by introducing the new relationships of horizontal stress increment-strain and shear stress-displacement.     

不同地形条件地面同步光谱定标场对比研究

利用美国ASD公司的FieldSpec Pro FR地面波谱仪,选择5°视场角探头和135cm探头距测试地物高度,开展0°、5°、10°、15°、20°等五种不同地形坡度明、暗地物自然定标场地面波谱测试。通过对比研究不同地形坡度具代表性、能真实反映被测试目标平均自然性的各波谱测试点波谱曲线特征,得出0°、5°地形坡度获取的波谱曲线连续、平滑,信噪比高,没有混入大气水气吸收、仪器噪声等因素导致的剧烈波动、跳跃现象或尖锐锯齿状噪声,波谱特征明显,吸收峰最小值位置清晰可辨,各波谱测试点波谱曲线变化幅度小,整体反射率值变化小,Fe~(2+)、Fe~(3+)、Al-OH、Mg-OH、CO_3~(2-)等分子基团与离子波谱的诊断性波谱特征位置清晰可辨。因此0°和5°坡度地形条件获取的地面同步自然场光谱定标波谱曲线,可以满足航空高光谱遥感数据的大气校正、光谱重建和空、地回归分析等所需的地面波谱数据要求。     

A synthetic aperture radar sea surface distribution estimation by n-order Bézier curve and its application in ship detection

To dates,most ship detection approaches for single-pol synthetic aperture radar(SAR) imagery try to ensure a constant false-alarm rate(CFAR).A high performance ship detector relies on two key components:an accurate estimation to a sea surface distribution and a fine designed CFAR algorithm.First,a novel nonparametric sea surface distribution estimation method is developed based on n-order Bézier curve.To estimate the sea surface distribution using n-order Bézier curve,an explicit analytical solution is derived based on a least square optimization,and the optimal selection also is presented to two essential parameters,the order n of Bézier curve and the number m of sample points.Next,to validate the ship detection performance of the estimated sea surface distribution,the estimated sea surface distribution by n-order Bézier curve is combined with a cell averaging CFAR(CA-CFAR).To eliminate the possible interfering ship targets in background window,an improved automatic censoring method is applied.Comprehensive experiments prove that in terms of sea surface estimation performance,the proposed method is as good as a traditional nonparametric Parzen window kernel method,and in most cases,outperforms two widely used parametric methods,K and G0 models.In terms of computation speed,a major advantage of the proposed estimation method is the time consuming only depended on the number m of sample points while independent of imagery size,which makes it can achieve a significant speed improvement to the Parzen window kernel method,and in some cases,it is even faster than two parametric methods.In terms of ship detection performance,the experiments show that the ship detector which constructed by the proposed sea surface distribution model and the given CA-CFAR algorithm has wide adaptability to different SAR sensors,resolutions and sea surface homogeneities and obtains a leading performance on the test dataset.     

东山乌礁湾海滩表层沉积物粒度时空变化分析

为了进一步了解海岛岬湾海岸表层沉积物粒度的时空分布特征和形成机制,作者以福建东山岛乌礁湾为典型研究区,通过秋、春、夏3个不同季节海滩表层沉积物的采集和点位测量,综合应用激光法和筛析法进行粒度测定。结果表明,东山乌礁湾海滩表层沉积物以0.16～0.50 mm之间的中、细砂为主,并含有少量的粗砂和细砾,这与区域砂质沉积背景有关;湾内从南到北剖面沉积物粒径由粗砂到细砂逐渐变细,主要受剖面地形、局地物源、季节性风浪作用和近岸往复水动力的影响。时间变化上,各取样站位表现出沉积物粒径粗、细不同程度的多种变化趋势,以秋季为参考,整体上表现为由南到北粒级的变小、增大和稳定,这与东北、南南西季风影响下的浪、潮作用以及沿岸流系格局变化下的水动力环境有关。     

基于Neuman井流理论确定玄武岩潜水含水层渗透系数的应用——以吉林靖宇煤矿为例

全面分析研究区玄武岩潜水含水层水文地质条件的基础上,对稳定流和非稳定理论确定潜水含水层渗透系数的优缺点进行了对比,认为非稳定井流公式确定玄武岩潜水含水层渗透系数是合理的。Aquifer Test软件基于Neuman井流理论配线法求参原理,运用计算机完成了自动求参,避免了人工配线的不足。该文根据吉林靖宇煤矿研究区玄武岩潜水含水层非稳定流抽水试验,分别用Aquifer Test软件和稳定井流公式进行了求参,并对比分析得出:玄武岩含水层弹性释水作用影响时间较长,利用Neuman潜水井流公式求参可靠,且更逼近现实;用Aquifer Test软件实现了自动求参,具有操作简单规范、可比性好的优点。     

Investigation of gas content of organic-rich shale:A case study from Lower Permian shale in southern North China Basin,central China

Measuring gas content is an essential step in estimating the commerciality of gas reserves. In this study,eight shale core samples from the Mouye-1 well were measured using a homemade patented gas desorption apparatus to determine their gas contents. Due to the air contamination that is introduced into the desorption canister, a mathematical method was devised to correct the gas quantity and quality.Compared to the chemical compositions of desorbed gas, the chemical compositions of residual gas are somewhat different. In residual gas, carbon dioxide and nitrogen record a slight increase, and propane is first observed. This phenomenon may be related to the exposure time during the transportation of shale samples from the drilling site to the laboratory, as well as the differences in the mass, size and adsorptivity of different gas molecules. In addition to a series of conventional methods, including the USBM direct method and the Amoco Curve Fit(ACF) method, which were used here for lost gas content estimation, a Modified Curve Fit(MCF) method, based on the 'bidisperse' diffusion model, was established to estimate lost gas content. By fitting the ACF and MCF models to gas desorption data, we determined that the MCF method could reasonably describe the gas desorption data over the entire time period, whereas the ACF method failed. The failure of the ACF method to describe the gas desorption process may be related to its restrictive assumption of a single pore size within shale samples. In comparison to the indirect method, this study demonstrates that none of the three methods studied in this investigation(USBM, ACF and MCF) could individually estimate the lost gas contents of all shale samples and that the proportion of free gas relative to total gas has a significant effect on the estimation accuracy of the selected method. When the ratio of free gas to total gas is lower than 45%, the USBM method is the best for estimating the lost gas content, whereas when the ratio ranges from 45% to 75% or is more than 75%, the ACF and MCF methods, are the best options respectively.