A new view of Italian seismicity using 20 years of instrumental recordings

In this paper, we show the seismicity of the past 20 years that occurred in Italy and surrounding regions. Hypocentral locations have been obtained by using P- and S-wave arrival times from the INGV national and several regional permanent seismic networks. More than 48,000 events, selected from an original data set of about 99,780, are used to reconstruct the most complete seismic picture of the Italian region so far. The seismicity distribution allows inference on seismotectonics of this complex region of subduction versus continental collision. Our results clearly reveal the geometry of the Adria and the Ionian subduction and a continuous normal fault belt in the upper crust, following the Apennines mountain range. The depth of the seismogenic layer is computed from the cut-off of seismicity at depth and shows large variations along and across the seismic active regions. Earthquakes are generated by the different velocity of slab retreat and the subsequent asthenospheric upwelling.     

北黄海盆地构造几何学研究新进展

北黄海盆地是发育于隆起背景之上的中、新生代沉积盆地。新一轮资源调查研究表明，北黄海中、新生代沉积盆地的基底由古生界沉积岩层和前寒武纪变质岩系等组成，盆地不同程度地发育下构造层（J3-K1）、中构造层（E2-E3）和上构造层（N）；从油气资源和中、新生代地层发育情况出发，将北黄海海域划分为辽东-海洋岛隆起区、北黄海盆地和胶北．刘公岛隆起区等3个一级构造单元，其中北黄海盆地包括6个二级构造单元和24个三级构造单元；盆地褶皱、断裂构造十分发育，褶皱构造可划分为区域挤压型、局部伴生型和披盖型等三类，断裂构造主要可见近EW—NE向、NW向和NNE向三组，其中近EW—NE向和NNE向断裂比较发育，控制着盆地隆、坳分布格局和沉积特征。     

Intensity of in‐lake processes in floodplain lakes within the Bug River zone of fluvial activity

The paper presents a new approach to calculating the erosion and deposition values of floodplain lake basins, the erosion–deposition index (EDI). The EDI is a sum of the basin geometry indices (BGIs), which can be calculated for a separate cross section of the lake. The distribution of processes within the basin was investigated in two selected floodplain lakes with the use of BGIs. Field research was carried out in the Bug River valley from 1 November 2006 to 31 October 2011. The highest erosion was observed in the lakes located close to the parent river. Deposition processes were observed in lakes with high inflow of groundwater. The results showed that EDI values of 48 out of the 71 floodplain lakes ranged from ?0.2 to 0.2. Spatial distribution of erosion and deposition processes within the lake basins resulted from a velocity of water inflowing or flowing through the basin. This was observed especially in contrafluent–confluent lake. Inflow of rivers water via upstream crevasse occurred later than via downstream one, but energy of flowing water was higher, which favoured erosion of this part of the lake basin. Copyright © 2013 John Wiley & Sons, Ltd.     

Structural geometry and controls on basement‐involved deformation in the northern Flinders Ranges,Adelaide Fold Belt,South Australia

In the northern Flinders Ranges, Neoproterozoic and Cambrian sedimentary rocks were deformed and variably metamorphosed during the ca 500 Ma Cambro‐Ordovician Delamerian Orogeny. Balanced and restored structural sections across the northern Flinders Ranges show shortening of about 10–20%. Despite the presence of suitable evaporitic detachment horizons at the basement‐cover interface, the structural style is best interpreted to be thick‐skinned involving basement with only a minor proportion of the overall shortening accommodated along stratigraphically controlled detachments. Much of the contractional deformation was localised by the inversion of former extensional faults such as the Norwest and Paralana Faults, which both controlled the deposition of Neoproterozoic cover successions. As such, both faults represent major, long‐lived structures which effectively define the present boundaries of the northern Flinders Ranges with the Gawler Craton to the west and the Curnamona Craton to the east. The most intense deformation, which resulted in exhumation of the basement along the Paralana Fault to form the Mt Painter and Babbage Inliers, coincides with extremely high heat flows related to extraordinarily high heat‐production rates in the basement rocks. High heat flow in the northern Flinders Ranges suggests that the structural style not only reflects the pre‐Delamerian basin architecture but is also a consequence of the reactivation of thermally perturbed, weakened basement.     

Reconstructing fluvial bar surfaces from compound cross‐strata and the interpretation of bar accretion direction in large river deposits

The interpretation of fluvial styles from the rock record is based for a significant part on the identification of different types of fluvial bars, characterized by the geometric relationship between structures indicative of palaeocurrent and surfaces interpreted as indicative of bar form and bar accretion direction. These surfaces of bar accretion are the boundaries of flood‐related bar increment elements, which are typically less abundant in outcrops than what would be desirable, particularly in large river deposits in which each flood mobilizes large volumes of sediment, causing flood‐increment boundary surfaces to be widely spaced. Cross‐strata set boundaries, on the other hand, are abundant and indirectly reflect the process of unit bar accretion, inclined due to the combined effect of the unit bar surface inclination and the individual bedform climbing angle, in turn controlled by changes in flow structure caused by local bar‐scale morphology. This work presents a new method to deduce the geometry of unit bar surfaces from measured pairs of cross‐strata and cross‐strata set boundaries. The method can be used in the absence of abundant flood‐increment bounding surfaces; the study of real cases shows that, for both downstream and laterally accreting bars, the reconstructed planes are very similar to measured bar increment surfaces.     

Smoothing and re-roughening processes: The geometric evolution of a single fault zone

The geometry of a fault zone exerts a major control on earthquake rupture processes and source parameters. Observations previously compiled from multiple faults suggest that fault surface shape evolves with displacement, but the specific processes driving the evolution of fault geometry within a single fault zone are not well understood. Here, we characterize the deformation history and geometry of an extraordinarily well-exposed fault using maps of cross-sectional exposures constructed with the Structure from Motion photogrammetric method. The La Quinta Fault, located in southern California, experienced at least three phases of deformation. Multiple layers of ultracataclasite formed during the most recent phase. Crosscutting relations between the layers define the evolution of the structures and demonstrate that new layers formed successively during the deformation history. Wear processes such as grain plucking from one layer into a younger layer and truncation of asperities at layer edges indicate that the layers were slip zones and the contacts between them slip surfaces. Slip surfaces that were not reactivated or modified after they were abandoned exhibit self-affine geometry, preserving the fault roughness from different stages of faulting. Roughness varies little between surfaces, except the last slip zone to form in the fault, which is the smoothest. This layer contains a distinct mineral assemblage, indicating that the composition of the fault rock exerts a control on roughness. In contrast, the similar roughness of the older slip zones, which have comparable mineralogy but clearly crosscut one another, suggests that as the fault matured the roughness of the active slip surface stayed approximately constant. Wear processes affected these layers, so for roughness to stay constant the roughening and smoothing effects of fault slip must have been approximately balanced. These observations suggest fault surface evolution occurs by nucleation of new surfaces and wear by competing smoothing and re-roughening processes.     

Investigation of directional hydraulic fracturing based on true tri-axial experiment and finite element modeling

The initiation and propagation of directional hydraulic fracturing (DHF) was investigated based on true tri-axial experiment and finite element modeling. The influences of notch angle, notch length and injection rate on the DHF were investigated. The initiation and propagation of DHF was modeled by a 3D nonlinear finite element method. A comparison between experimental investigation and numerical modeling results indicates that there is a good correlation between unbalanced force (UF) and fracturing. UF can be used to predict the hydraulic fracture initiation and propagation.     

重力场数学拟合模型解的影响因素探究

为了提高地球重力场模型不适定方程求解的精度,该文采用谱分析方法从级数展开阶数、数据采样率及数据缺失量3个方面探索影响数学拟合效果的根本因素:从常用的三角级数及勒让德级数模型出发,引出重力场拟合模型球谐函数模型,观察在改变级数展开阶数、数据采样率及数据缺失量等情况下所对应设计矩阵谱结构的变化,并从微观上研究影响误差分配的有关因素及最小奇异值对误差的决定性作用,为探求重力场模型解不准的原因及实现更高精度的全球重力场模型的建立提供参考。