埕岛油田数据基础重组及开发应用

从数据管理及后期应用的角度提出了数据平台的要领，讨论了该数据平台的物理结构、逻辑结构，在分类与组织的基础上给出了相应的数据字典。同时，还基于该平台探讨了测井曲线库及图形库的建设方法，并实现了具体功能。     

海洋平台结构形状与拓扑优化设计

以实际环境荷载作用下的实际海洋导管架平台结构为对象，研究了海洋平台结构在风，流，海冰等多荷载模式和多荷载工况下的优化设计的理论方法和应用技术，建立了结构尺寸优化，形状优化和拓扑优化问题的统一模型。计算结果反映出形状优化比尺寸优化所得设计更优，而拓扑优化的设计效果最好。不同的荷载工况对应的最优拓扑形式不同，因此在实际设计中应考虑实际的荷载工况，选取不同的拓扑形式。     

An Application of Direct Ritz Method for Random Seismic Responses of Jacket Platforms

1 .IntroductionNowadays tremendous efforts have been devotedtothe analysis of randomseismic responses .Forexample ,American PetroleumInstitute (API) has declared that the analysis of randomseismic re-sponsesis a useful tool for safety inspection. Owing to the complexity of platformand randomness ofload,it is difficult to carry out the randomresponse analysis of a jacket platform. The conventionalrandomvibration methods ,such as square root of the sumof squares (SRSS) and complete quadratic…     

地震作用下的导管架海洋平台结构动力优化设计研究

把导管架海洋平台看作钢框架结构，并把优化方法用于结构的抗震设计中；以结构的总重量最小为优化目标，导管的平均直径和壁厚作为设计变量，考虑强度、刚度和稳定等约束条件。通过渤海BZ28—1油田储油平台为例进行了计算，计算结果表明，此方法对海洋平台的设计具有一定的参考意义。     

杭州湾海域水体悬沙粒度统计分析

利用2000年9月在杭州湾进行的原型水文泥沙测验所获取的648个悬沙粒度样品,进行了样品粒度统计分析,结果表明:在杭州湾测验区域,粒径为4.00～20.20μm的悬沙出现频率最高;悬沙的中值粒径值自东向西迅速增大;北岸海域悬沙的中值粒径值大于南岸海域悬沙的中值粒径值。     

SII型海洋重力仪稳定平台颤动故障与排除方法

S型海洋重力仪是目前海洋重力测量中较为常用的一种仪器，其产品性能也逐步得到提高。介绍了进行全自动化控制升级后，最新引进的SⅡ型海洋重力仪使用中出现的稳定平台颤动故障现象及排除办法。     

深圳大鹏湾表层沉积物碎屑矿物空间分布特征

立足样品测试数据,利用空间分析、空间插值、地质统计以及景观生态学方法,深入分析了深圳大鹏湾表层沉积物碎屑矿物的空间分布特征,并使用球状模型对相应半变异函数进行理论建模。结果表明,碎屑矿物分布的Hurst分维数为0.28～0.97,空间几何分维数为1.03～1.72;Moran Ⅰ型空间自相关系数-0.15～0.53。在此基础上,以等值线分布所包围范围作为划分尺度,以Shannon-Wiener信息指数作为度量,得到的矿物分布所反映出的信息量或者富集程度指数为0.88～1.85。     

The Spatial Distribution of Caprellidea (Crustacea: Amphipoda): A Stress Bioindicator in Ceuta (North Africa, Gibraltar Area)

Abstract. The caprellid (Crustacea: Amphipoda) community associated with the alga Cystoseira usneoides (L.) Roberts 1967 was studied on a spatial scale in relation to the influence of environmental factors on the coast of Ceuta (North Africa) using multivariate analyses. Twenty-two stations were sampled and five environmental factors were tested (hydrodynamics, silting, suspended organic matter, organic matter in silt and suspended solids). The spatial distribution of the caprellid community reflected the physico-chemical conditions of the coast. Phtisica marina Slabber 1769 was the only species present at the stations of the harbour of Ceuta, characterised by the lowest values of hydrodynamics and the highest values of silting, suspended organic matter and suspended solids. The most exposed stations (high hydrodynamics and low values of silting, dissolved organic matter and suspension solids) were mainly dominated by Caprella danilevskii Czerniavskii 1868 and C. penantis Leach 1814. These two species have developed a "parallel" posture that enables them to attach strongly to the substratum and thus inhabit areas subjected to heavy exposure or strong currents. Caprella acanthifera Leach 1814 and Pseudoprotella phasma (Montagu 1804) preferred stations characterised by moderate values of silting and suspended solids, such as those located in the coastal areas in front of the city of Ceuta, but these species were not found at the most stressed harbour stations.     

A new type of Shipboard Meteorological Satellite Receiving-processing System

INTRODUCTIONTheSMSRPSisstalledontheshipnavigatingovertheseaandreceivessatellitecloudmapsatanytimetoprovidereliablereal-timedataofmeteorologyandocean.Itisanimportantequipmentforsafeguardofshipnavigation.Chinahasthousandsofoceanicships.Butalmostallships,withonlyveryfewexception,arenotstalledbySMSRPS.Thecausesareasfollows:1.Thetechniqueisverycomplicated.2.Thedevelopmentcostisveryhigh.3.Ifweintroduceforeignequipment,thecostistooexpensive.4.Foreignequipmentanditssoftwarearecompletelyclo…     

A dynamic response analysis of tension leg platforms including hydrodynamic interaction in regular waves

A numerical procedure is described for predicting the motion and structural responses of tension leg platforms (TLPs) in waves. The developed numerical approach, in a TLP is assumed to be flexible instead of rigid, is based on a combination of the three dimensional source distribution method and the finite-element method. The hydrodynamic interactions among TLP members, such as columns and pontoons, are included in the motion and structural response analysis. Numerical results are compared with the experimental and numerical ones. The results of comparison confirmed the validity of the proposed approach.