������������Ӧ�����궯̬�仯��������ֵģ��

?????????????????????????????????????ó???????????????????????仯??????1???????????仯????????????????NNW-SSE??????????3~9 kPa a^-1???????????仯???????????????NEE-SWW??????????1~6 kPa a^-1?????????????????????????????????????￡?2???????????仯????????????????NNW????????????????,??????????????????????????????????仯???????????????NEE????????λ?????????????????????仯????????????????????????????????????????????п????????Щ???????????????????3?????????????????????????????????з???????????-???ε???????????????????6 kPa a^-1?????-?????ε???????????????????5 kPa a^-1???????κ??????媲????ε????????????????????3~4 kPa a^-1??     

水下溢油数值模拟研究

基于Lagrange积分法和Lagrange粒子追踪法建立了一个水下溢油数值模型。该溢油模型由两个子模型组成:羽流动力模型和对流扩散模型,其中羽流动力模型用以模拟溢油的喷发阶段和浮力羽流阶段;对流扩散模型用以模拟溢油的对流扩散阶段。通过数值实验,结合实验室水槽实验和水下溢油现场实验的观测资料进行模型验证。实验结果表明,模拟结果与观测资料一致性较好,从而验证了本文溢油模型的合理性和准确性;羽流动力模型为对流扩散模型提供源,海流、海水的垂向密度结构和油滴的直径分布是影响溢油在对流扩散阶段运动和分布的主要因素。     

Influence of size on the constitutive equations of concrete or rock dowels

The numerical fracture analysis of non‐homogeneous rock or concrete dowels subjected to shear and compression is described in detail. The method of analysis allows the consideration of scale and rate effects due to material non‐homogeneity and fracture. The proposed approach is verified by comparing numerical predictions with experimental results reported in the literature for a series of small rock samples, since experimental evidence for large bodies is not yet available (2007). Results generated by Monte Carlo simulation using the so‐called discrete element method to model the dowels suggest that a simple three parameters law can be used to predict the relationship between tangential stress at the base and lateral distortion. It is observed that the larger the size of the cubes, the smaller both the peak tangential stress and the rupture distortion. Size effects are also evaluated in samples with vertical restraint. The influence of loading rate is likewise numerically assessed for two sample sizes. The effect is compatible with experimental evidence available for concrete using small samples. Copyright © 2008 John Wiley & Sons, Ltd.     

Simulation of probability distributions commonly used in hydrological frequency analysis

Random variable simulation has been applied to many applications in hydrological modelling, flood risk analysis, environmental impact assessment, etc. However, computer codes for simulation of distributions commonly used in hydrological frequency analysis are not available in most software libraries. This paper presents a frequency‐factor‐based method for random number generation of five distributions (normal, log–normal, extreme‐value type I, Pearson type III and log‐Pearson type III) commonly used in hydrological frequency analysis. The proposed method is shown to produce random numbers of desired distributions through three means of validation: (1) graphical comparison of cumulative distribution functions (CDFs) and empirical CDFs derived from generated data; (2) properties of estimated parameters; (3) type I error of goodness‐of‐fit test. An advantage of the method is that it does not require CDF inversion, and frequency factors of the five commonly used distributions involves only the standard normal deviate. Copyright © 2006 John Wiley & Sons, Ltd.     

Distributed discharge and sediment concentration predictions in the sub‐humid Ethiopian highlands: the Debre Mawi watershed

Experimental research in the Ethiopian highlands found that saturation excess induced runoff and erosion are common in the sub‐humid conditions. Because most erosion simulation models applied in the highlands are based on infiltration excess, we, as an alternative, developed the Parameter Efficient Distributed (PED) model, which can simulate water and sediment fluxes in landscapes with saturation excess runoff. The PED model has previously only been tested at the outlet of a watershed and not for distributed runoff and sediment concentration within the watershed. In this study, we compare the distributed storm runoff and sediment concentration of the PED model against collected data in the 95‐ha Debre Mawi watershed and three of its nested sub‐watersheds for the 2010 and 2011 rainy seasons. In the PED model framework, the hydrology of the watershed is divided between infiltrating and runoff zones, with erosion only taking place from two surface runoff zones. Daily storm runoff and sediment concentration values, ranging from 0.5 to over 30 mm and from 0.1 to 35 g l^?1, respectively, were well simulated. The Nash Sutcliffe efficiency values for the daily storm runoff for outlet and sub‐watersheds ranged from 0.66 to 0.82, and the Nash–Sutcliffe efficiency for daily sediment concentrations were greater than 0.78. Furthermore, the model uses realistic fractional areas for surface and subsurface flow contributions, for example between saturated areas (15%), degraded areas (30%) and permeable areas (55%) at the main outlet, while close similarity was found for the remaining hydrology and erosion parameter values. One exception occurred for the distinctly greater transport limited parameter at the actively gullying lower part of the watershed. The results suggest that the model based on saturation excess provides a good representation of the observed spatially distributed runoff and sediment concentrations within a watershed by modelling the bottom lands (as opposed to the uplands) as the dominant contributor of the runoff and sediment load. Copyright © 2014 John Wiley & Sons, Ltd.     

Analysis of flood propagation changes in the Kienstock—Bratislava reach of the Danube River/Analyse des changements de propagation des crues dans le tronçon Kienstock—Bratislava du Fleuve Danube

Abstract

In the first part of this study, a flood wave transformation analysis for the largest historical floods in the Danube River reach Kienstock–Bratislava was carried out. For the simulation of the historical (1899 and 1954) flood propagation, the nonlinear river model NLN-Danube (calibrated on the recent river reach conditions) was used. It was shown that the simulated peak discharges were not changed significantly when compared to their historical counterparts. However, the simulated hydrographs exhibit a significant acceleration of the flood wave movement at discharges of between 5000 and 9000 m³ s^-1. In the second part, the travel time-water level relationships between Kienstock and Bratislava were analysed on a dataset of the flood peak water levels for the period 1991–2002. An empirical regression routing scheme for the Danube short-term water level forecast at Bratislava station was derived. This is based on the measured water level at Kienstock gauging station.     

3-D BAROCLINIC NUMERICAL SIMULATION OF THE SOUTH CHINA SEA I. UPPER CIRCULATION

A three-dimensional baroclinic shelf sea model was employed to simulate the seasonal characteristics of the South China Sea (SCS) upper circulation. The results showed that: in summer, an anticyclonic eddy, after its formation between the Bashi Channel and Dongsha Islands in the northeastern SCS, moves southwestward until it disperses slowly. There exists a northward western boundary current along the east shore of the Indo-China Peninsula in the western SCS and an anticyclonic gyre in the southern SCS. But at the end of summer and beginning of autumn, a weak local cyclonic eddy forms in the Nansha Trough, then grows slowly and moves westward till it becomes a cyclonic gyre in the southern SCS in autumn. At the beginning of winter, there exists a cyclonic gyre in the northern and southern SCS, and there is a southward western boundary current along the east shore of the Indo-China Peninsula. But at the end of winter, an anticyclonic eddy grows and moves toward the western boundary after forming in the Nansha Trough. The eddy‘s movement induces a new opposite sign eddy on its eastern side, while the strength of the southward western boundary current gets weakened. This phenomenon continues till spring and causes eddies in the southern SCS.     

SOFTWARE REVIEWS

ATLAS*GIS , Version 1.0. ATLAS*MapMaker , Version 4.0. FIVFIV-SINSIN , Release 9.0. Geo-EAS , Version 1.2.1. Evan Englund Sim City , Version 1.0 Statistix , Version 3.1.     

辽河油田曙一区杜84块兴隆台油层构造应力场研究

根据辽河油田已有地层、构造资料，研究了杜84块构造格架、主要断裂特点，在此基础上,建立了构造应力场模拟的三维地质模型，用3D-σ软件进行了构造应力场三维有限元模拟研究。其结果表明，杜84块油层受构造应力状态为最大和中间主应力近水平，最小主应力垂直。在此应力场作用下，区内断层运动方式为正断兼水平扭动。三维有限元模拟计算结果表明，沿断层带均发生压应力和剪应力集中现象,从而有利于断层发生扭张性运动。位移分析表明，有明显的呈阶梯状组合的正断位移。据破坏率分析，在现有应力场作用下，油层所在岩体局部会产生裂缝。