CORS系统在GPSC级控制网测量中的应用

简要介绍了CORS系统的发展情况,分析了GPS C级控制网测量的精度,就GPS网的布设、基线解算、GPS网平差及检核进行有益的探讨,旨在发挥CORS的优势,解决GPS控制网测量中控制点缺乏的问题,提高CORS的应用水平。     

轨道约束的资源三号标准景影像区域网平差

考虑到同轨道拍摄的长条带卫星影像具有相同的误差分布特性,针对资源三号的标准景影像产品,提出了基于轨道约束的卫星影像区域网平差方法。首先,根据同轨相邻影像的偏移量计算轨道影像坐标系下的像点坐标;其次,通过同轨每景影像的RFM重新生成轨道影像的RFM,同时生成补偿格网;然后,根据基于像方仿射变换的RFM对轨道影像进行区域网平差;最后,利用求得的轨道影像的仿射变换参数重新计算原始单景影像的仿射变换参数。利用不同地区资源三号测绘卫星影像数据的试验表明,基于轨道约束的卫星影像区域网平差（以下简称轨道平差）在稀疏控制条件下,其精度明显好于单景影像平差的精度。在6控情况下,太行山试验区达到平面2.504m高程3.117m,在渭南试验区达到了平面4.061m高程2.895m。试验结果证明了轨道平差的有效性和可行性。     

经典测量平差模型等价性分析

对经典平差模型进行了较深入的分析和比较,在数学推导的基础上,附有参数的条件平差都可以转换成其他模型。在某种意义上说,附有参数的条件平差也可作为概括模型。     

基于定向片模型的SPOT-5遥感影像自检校光束法平差

本文通过建立内方位自检校模型,利用定向片模型对外方位元素进行内插建模,建立了基于定向片模型的自检校光束法平差,研究不同控制点数量和不同定向片间隔对定位精度的影响,并利用河南嵩山地区SPOT-5遥感影像数据对模型进行了实验验证和分析,结果表明,平面精度可以达到10.06m,高程精度可以达到8.84m.     

条件平差和间接平差模型应满足的两个等式关系

条件平差和间接平差法是两种最基本的测量数据处理的方法,在整个工科数据处理中得到了广泛应用.但是,实践中,一些工程人员对这两种平差方法的区别与联系并不十分了解.本文基于最小二乘准则解的本质,推导出了条件平差法与间接平差法系数阵和常数项间应满足的两个等式关系,有助于广大工程人员理解这两种测量平差的本质与联系.     

Towards a comprehensive approach to parameter estimation in land surface parameterization schemes

In climate models, the land–atmosphere interactions are described numerically by land surface parameterization (LSP) schemes. The continuing improvement in realism in these schemes comes at the expense of the need to specify a large number of parameters that are either directly measured or estimated. Also, an emerging problem is whether the relationships used in LSPs are universal and globally applicable. One plausible approach to evaluate this is to first minimize uncertainty in model parameters by calibration. In this paper, we conduct a comprehensive analysis of some model diagnostics using a slightly modified version of the Simple Biosphere 3 model for a variety of biomes located mainly in the Amazon. First, the degree of influence of each individual parameter in simulating surface fluxes is identified. Next, we estimate parameters using a multi‐operator genetic algorithm applied in a multi‐objective context and evaluate simulations of energy and carbon fluxes against observations. Compared with the default parameter sets, these parameter estimates improve the partitioning of energy fluxes in forest and cropland sites and provide better simulations of daytime increases in assimilation of net carbon during the dry season at forest sites. Finally, a detailed assessment of the parameter estimation problem was performed by accounting for the decomposition of the mean squared error to the total model uncertainty. Analysis of the total prediction uncertainty reveals that the parameter adjustments significantly improve reproduction of the mean and variability of the flux time series at all sites and generally remove seasonality of the errors but do not improve dynamical properties. Our results demonstrate that error decomposition provides a meaningful and intuitive way to understand differences in model performance. To make further advancements in the knowledge of these models, we encourage the LSP community to adopt similar approaches in the future. Copyright © 2012 John Wiley & Sons, Ltd.     

青藏高原500hpa暖性高压生成的热成风适应机制

本文利用热成风适应原理,采取分解分析法对青藏高原500hpa暖性高压的生成机制作了一些定性和定量的讨论。结果表明:在扰动的水平尺度大于热成风适应的特征尺度的条件下,当源地有明显的负值非热成风涡度出现时,流场将向温度场适应,而温度场由于高原的加热作用存在暖中心或暖脊,则适应的结果在高原大气500hpa形成暖性高压,并伴随高层辐合,低层辐散及下沉运动。     

UAVRS影像空中三角测量实验研究

无人飞行器低空遥感系统(UAV Low Altitude Remote Sensing System简称UAVRS系统)适合于在阴云山区低空获取高分辨率垂直和倾斜影像,但获取的影像存在像幅小、数量多、基线短、重叠度不规则且倾角过大等问题,而这些问题,都是国内外现有的数字摄影测量系统面临的新问题。本文提出以带权观测值光束法平差解决UAVRS复杂影像区域网的空中三角测量问题的方法。其技术要点在于,从提高单模型定向的精度出发,以单模型定向元素为基础构建自由区域网,为带权观测值光束法平差提供有效初值。经试验表明,空三加密点的平面精度为0.386m,高程精度为0.525m,基本能达到1∶2000地形图测图的要求。     

Evaluation of stress strain non-uniformities in the laboratory direct simple shear test specimens using 3D discrete element analysis

The direct simple shear (DSS) device is one of the commonly used laboratory element testing tools to characterize the shear behaviour of soil. The interpretation of results from an element test requires understanding of the degree of stress and strain non-uniformities in a given test specimen. So far, studies on stress and strain non-uniformities in the DSS test have been conducted using direct boundary measurements of stresses in laboratory specimens supported by a continuum based analytical approach. Discrete element modelling now provides a means of modelling the soil behaviour in a realistic manner using a particulate approach. Accordingly, the performance of a DSS specimen was modelled using discrete element modelling with emphasis on assessing stress and strain non-uniformities in the specimen during shearing. The approach allowed for the numerical determination of stresses not only at the boundaries, but also within the DSS specimen. It was shown that mobilised stress ratio distribution throughout the shearing phase for the majority of specimen volume at locations near the central planes parallel and perpendicular to the direction of shearing is fairly uniform. Finally, it was noted that the potential for particle slippage at locations near the specimen centre can result in non-uniform shear strain distributions.     

复数域总体最小二乘平差

在复数域最小二乘的基础上提出了复数域总体最小二乘平差方法,推导了复数域总体最小二乘和复数混合总体最小二乘的相关公式。通过算例比较分析了复数观测值的残差的模的平方和最小(平差准则1)下及残差的实部和虚部的平方和分别最小(平差准则2)下的复数最小二乘、复数观测值和系数矩阵的残差的模的平方和最小(平差准则3)下及残差的实部和虚部的平方和分别最小(平差准则4)下的复数总体最小二乘方法的优劣。试验结果表明:平差准则1下复数最小二乘较平差准则2下得到的结果更加合理,平差准则3下复数总体最小二乘较平差准则4下得到的结果更为准确;当顾及系数矩阵误差时,平差准则3下复数总体最小二乘要优于平差准则1下复数最小二乘。