探地雷达数据可视化方法

采用文件映射降低大数据量探地雷达(GPR)数据显示对计算机内存的需求,同时使GPR数据可以当作一维数组进行数据处理,方便对数据的随机、实时访问;应用直接写位图、视区分割的成图方案,实现对GPR数据的实时显示;通过位图调色板实现GPR数据调色板,灵活应用该技术可使本来需要对原始数据进行大量运算的算法通过调整调色板实现,提高了GPR数据处理的速度。     

中国深空测控网建立方案的研究

概述了深空测控网的基本技术要求,总结了我国卫星测控网和国内现有射电观测设施的技术、组成和分布,分析和论述了将我国现有的测控设施建设成深空测控网的具体方案。     

青藏公路路基变形分析

为研究青藏公路多年冻土人为上限在退化过程中对路基变形产生的影响过程和程度, 在唐古拉山以南选择了3处具有代表性的路面进行了为期2 a的路面变形观测. 资料表明, 在多年冻土人为上限退化过程中随着公路路基结构、冻土类型的不同, 路基变形从冻胀和融沉过程、冻胀量和融沉量、发生的时间都有很大的不同. 在高含冰量多年冻土区采用半挖半填结构产生的路基变形最为剧烈, 在含冰量相对少且采用较高路堤结构的地段路基变形过程相对平缓. 同时结合探地雷达的勘察结果对路基下的融化区、多年冻土区的内部结构进行了分析. 结果显示,多年冻土人为上限的下移、地下冰的融化会在多年冻土人为上限以上的地质体中导致较强烈的层间错动和扰动.     

成像雷达干涉测量数据相关性与干旱-半干旱地区地表类型特征的关系

利用欧洲资源卫星1号和2号获取的重轨干涉测量雷达数据，首先进行干涉测量数据相关性估测，并结合干涉测量数据的振幅信息，开展新疆喀什试验区地表土地类型的识别与分类，区分和识别出裸土、盐碱地、灌丛、裸岩/戈壁、沼泽和水体 6类土地类型。最后通过对不同土地类型的后向散射特性和相关性的分析，探讨了干涉测量数据相关性与干旱-半干旱地区地表特征的关系。     

探地雷达检测道路厚度结构的应用现状及进展

对探地雷达检测道路厚度结构的应用现状进行介绍,分析雷达检测道路厚度结构的物理前提.将探地雷达的道路厚度检测技术与常规的钻孔取芯方法进行对比,并根据笔者在工作中应用的实际情况,说明探地雷达在公路厚度结构检测方面有广阔应用前景.     

探地雷达检测中如何计算速度

雷达波的传播速度随介质而变,这给准确定位探测目标带来了一些困难,因为目标深度取决于速度与讯号反射时间的乘积.但另一方面,利用速度变化与介质的关系,反过来可以推断介质的物质架构.作者结合实用例举了7种求速度的方法,以供使用探地雷达的同行们选用.     

Optimal Model for Geoid Determination from Airborne Gravity

Two different approaches for transformation of airborne gravity disturbances, derived from gravity observations at low-elevation flying platforms, into geoidal undulations are formulated, tested and discussed in this contribution. Their mathematical models are based on Green's integral equations. They are in these two approaches defined at two different levels and also applied in a mutually reversed order. While one of these approaches corresponds to the classical method commonly applied in processing of ground gravity data, the other approach represents a new method for processing of gravity data in geoid determination that is unique to airborne gravimetry. Although theoretically equivalent in the continuous sense, both approaches are tested numerically for possible numerical advantages, especially due to the inverse of discretized Fredholm's integral equation of the first kind applied on different data. High-frequency synthetic gravity data burdened by the 2-mGal random noise, that are expected from current airborne gravity systems, are used for numerical testing. The results show that both approaches can deliver for the given data a comparable cm-level accuracy of the geoidal undulations. The new approach has, however, significantly higher computational efficiency. It would be thus recommended for real life geoid computations. Additional errors related to regularization of gravity data and the geoid, and to accuracy of the reference field, that would further deteriorate the quality of estimated geoidal undulations, are not considered in this study.     

Simulation and measurement of surface shear stress over isolated and closely spaced transverse dunes in a wind tunnel

Topographic interactions generate multidirectional and unsteady air?ow that limits the application of velocity pro?le approaches for estimating sediment transport over dunes. Results are presented from a series of wind tunnel simulations using Irwin‐type surface‐mounted pressure sensors to measure shear stress variability directly at the surface over both isolated and closely spaced sharp‐crested model dunes. Findings complement existing theories on secondary air?ow effects on stoss transport dynamics and provide new information on the in?uence of lee‐side air?ow patterns on dune morphodynamics. For all speeds investigated, turbulent unsteadiness at the dune toe indicates a greater, more variable surface shear, despite a signi?cant drop in time‐averaged measurements of streamwise shear stress at this location. This effect is believed suf?cient to inhibit sediment deposition at the toe and may be responsible for documented intermittency in sand transport in the toe region. On the stoss slope, streamline compression and ?ow acceleration cause an increase in ?ow steadiness and shear stress to a maximum at the crest that is double that at the toe of the isolated dune and 60–70 per cent greater than at ?ow reattachment on the lower stoss of closely spaced dunes. Streamwise ?ow accelerations, rather than turbulence, have greater in?uence on stress generation on the stoss and this effect increases with stoss slope distance and with incident wind speed. Reversed ?ow within the separation cell generates signi?cant surface shear (30–40 per cent of maximum values) for both spacings. This supports ?eld studies that suggest reversed ?ow is competent enough to return sediment to the dune directly or in a de?ected direction. High variability in shear at reattachment indicates impact of a turbulent shear layer that, despite low values of time‐averaged streamwise stress in this region, would inhibit sediment accumulation. Downwind of reattachment, shear stress and ?ow steadiness increase within 6 h (h = dune height) of reattachment and approach upwind values by 25 h. A distance of at least 30 h is suggested for full boundary layer recovery, which is comparable to ?uvial estimates. The Irwin sensor used in this study provides a reliable means to measure skin friction force responsible for sand transport and its robust, simple, and cost‐effective design shows promise for validating these ?ndings in natural dune settings. Copyright © 2003 John Wiley & Sons, Ltd.     

机载激光测深中的波浪改正技术

基于我国新研制的机载激光测深系统基本配置，提出了3种可供选择的波浪改正计算方案(也称为深度值归算方案)，具体分析了3种方案的适用条件和应用范围，并从理论上对3种改正模型的计算精度进行了估算。