船舶机舱自动集中监测报警系统结构与功能分析

船舶机舱集中监测与报警系统目前已在船舶设计制造中得以广泛应用。对其组成、工作流程及功能进行了较为系统的阐述 ,为船舶使用者提供借鉴     

Long-term Sensor Drift Found in Recovered Argo Profiling Floats

We recovered three Argo profiling floats after 2 to 2.5 years of operation, and recalibrated their temperature, conductivity, and pressure sensors. The results demonstrate that these floats exhibited a significant drift in salinity of −0.0074 to −0.0125, primarily due to the conductivity sensor drift. Combined with the recalibration result for another previously recovered float, the indication is that the negative salinity drift increases nearly in proportion to the operating period of floats. The increasing rate is −0.0041 (±0.0015) year⁻¹, which yields a salinity drift of −0.016 (±0.006) for the expected float lifetime of four years. The present result suggests that reducing the float surfacing time would improve the accuracy of the salinity measurements.     

高精度CTD剖面仪电导率传感器的研究和实验

高精度CTD剖面仪是海洋863项目的重要组成部分，是海洋调查和水文观测必不可少的仪器，本文详细论述了CTD剖面仪中电导率传感器的研制方法和过程，并给出传感器现已达到的水平，提出还需要进一步进行的工作和深入研究的问题。     

Use of an optical oxygen sensor to measure dissolved oxygen in seawater

The use of an optical oxygen sensor to measure dissolved oxygen in seawater was investigated. The sensor is based on the dynamic quenching of an oxygen-sensitive fluorochrome embedded in the tip. Dissolved oxygen in seawater samples collected from eight stations at depths ranging from 3000 to 6000 m was analyzed both with the optical sensor and by the Winkler titration method. The two sets of data did not differ significantly. The stability and simplicity of the method and the good agreement of the results with those of the titration method indicate that the sensor would be useful for fieldwork.     

Stability of Temperature and Conductivity Sensors of Argo Profiling Floats

After recalibration of the temperature and conductivity sensors of three Argo profiling floats recovered after operations for four to nine months, the results indicate that the floats basically showed no significant drift, either in temperature or salinity, and adequately fulfilled the accuracy requirement of the Argo project (0.005°C for temperature and 0.01 psu for salinity). Only the third float showed a significant offset in salinity of about −0.02 psu, as expected from comparison between the float data and the shipboard conductivity-temperature-depth data. This offset was caused by the operational error of the PROVOR-type float, in which the surface water was pumped immediately after the launch, fouling the conductivity sensor cell. This revised version was published online in July 2006 with corrections to the Cover Date.     

具有国际先进水平的CTD定标检测设备

在国家863计划的支持下，海洋技术研究成功研制了一套CTD仪器的校准设备，本文介绍了设备的组成，性能，设计经过与SBE设备进行了比较，表明该设备达到了EOCECTD设备的校准要求，同时，该设备是海洋技术研究所开发自有的高度CTD剖面仪的有力工具。     

高精度CTD剖面仪研制过程中的专用设备

本文介绍了“油水分离压力罐”的主要理论依据及该设备采用的特殊的机械结构，实践证明，利用该设备实现了在实验室条件下，模拟深海重力场检测CTD剖面仪中的某些关键传感器的目的。     

煤矿区地质环境与地质灾害遥感集成监测系统的关键技术

面向“数字矿山”应用系统的需要,在分析煤矿区地质环境和地质灾害特点及其在遥感监测理论依据的基础上,提出了煤矿区地质环境与地质灾害遥感集成监测系统的技术思路和体系结构,强调各种监测技术手段、不同时空尺度、不同数据源和不同主题信息的集成,并针对这一集成系统实现与应用中的多目标遥感信息处理、环境传感器网络应用、遥感监测数据与专题分析模型的集成、数据质量控制等关键问题进行了探讨。     

大地测量Web服务框架及其应用的研究

定位技术的大众化和数据应用的广泛化正让传统大地测量模式悄然改变。本文从分析大地测量信息系统计算模式的发展过程入手,提出了网络环境下大地测量信息服务的总体框架,重点分析了以定位服务、控制点服务和数据服务为核心的服务内容,并对构建服务所要应用的XML、数据标准和元数据三个关键技术进行阐述,最后还对基于框架的大地测量过程进行了研究,实现了基于Web服务技术的大地测量生产和服务,为实现大范围跨系统的大地测量信息集成应用提供就新的技术思路。     

基于Web 2.0的GIS模型共享平台研究

本文提出了基于Web 2.0建立GIS模型共享平台的设想,以期建立一个能够让用户创造模型和组织数据的GIS模型共享平台,并基于模型共享平台建立原型系统。借鉴了Web 2.0的数据自组织形式,按标签分类的方式让用户参与元数据组织,以适应各个领域用户的需求。同时为改变以往被动等待用户查询信息的方式,原型系统按RSS标准主动发布有价值信息,用户可以在第一时间获知系统更新。原型系统功能用网络服务封装,并提供客户端程序,提高了系统适用范围。原型系统的建立,证实了构建基于Web 2.0的GIS模型共享平台的价值和可行性。