环境监测中无线传感器网络地面遥感新技术

最近国际上蓬勃发展起来一个新交叉科学领域——无线传感器网络技术。本文首先介绍了无线传感器网络（Wireless Sensor Network,WSN）技术,它是遥感技术的拓展而且两者互为支撑。然后介绍了无线传感器网络技术的潜在应用领域及其在地学应用中的国际发展趋势,提出了无线传感器网络技术应用到环境领域的基本问题,建议在地球观测领域发展无线传感器网络技术。最后介绍了无线传感器网络技术在环境监测中的几个设想。     

异构传感器网络基于身份的认证及密钥协商方案

结合身份密码体制,提出了一个基于身份和地理位置信息的异构传感器网络(HSN)节点间的双向认证及密钥协商方案。不同性能节点之间采用不同的协议完成身份认证和密钥建立,充分发挥了高性能节点的能力,降低了低性能节点的能耗。该方案具有完美前向保密性和主密钥前向保密性,具有较好的抗节点伪造、节点复制和女巫攻击能力。分析与仿真表明,该方案具有较好的安全性。     

Vegetation图像植被指数与实测水稻叶面积指数的关系

水稻的叶面积指数 (LAI)是水稻生长的一项重要参数 ,与水稻的生物量与产量直接相关。利用 1999年在江苏省江宁县实测的水稻叶面积指数与同期Vegetation/SPOT的植被指数作了对比分析 ,结果发现同期的LAI与植被指数表现相近的变化特征 ,两者具有良好的相关关系。     

关注我国“工业测量”事业的发展

尝试给出工业测量的定义、范畴、目标的分类和多样性,简要叙述工业测量手段的多样性,列举待研制和待改进的工业测量集成系统的名称以及所依托的几何传感器的类别。     

921型超低频有源伺服式速度,位移计

本介绍一种在很小体积的往复式摆上采用有源伺服技术实现超低频大幅值测量用的速度计、位移计，它可在多个频带测量速度和位移。最低频率可达０．０４Ｈｚ，最大可测位移为±１５ｍ。它可用于海浪浪高、抽油机行程、高柔结构的超低频大位移测量。该仪器于１９９２年获得国家专利，并获得中国专利博览会银奖。     

基于磁弹效应的索力传感器研究

本文介绍了一种建立在磁弹效应原理基础上的可用来测量钢索轴向拉力的传感器。文中详细阐述了其基本原理,设计了单路磁循环的磁路结构,进行了磁路分析并提出一种电脉冲磁化法的实验装置,给出实验结果。实验结果与理论设计相符,系统稳定可靠。该装置具有可由电池供电、体积小、造价低廉、便于携带的特点。     

Simulation and measurement of surface shear stress over isolated and closely spaced transverse dunes in a wind tunnel

Topographic interactions generate multidirectional and unsteady air?ow that limits the application of velocity pro?le approaches for estimating sediment transport over dunes. Results are presented from a series of wind tunnel simulations using Irwin‐type surface‐mounted pressure sensors to measure shear stress variability directly at the surface over both isolated and closely spaced sharp‐crested model dunes. Findings complement existing theories on secondary air?ow effects on stoss transport dynamics and provide new information on the in?uence of lee‐side air?ow patterns on dune morphodynamics. For all speeds investigated, turbulent unsteadiness at the dune toe indicates a greater, more variable surface shear, despite a signi?cant drop in time‐averaged measurements of streamwise shear stress at this location. This effect is believed suf?cient to inhibit sediment deposition at the toe and may be responsible for documented intermittency in sand transport in the toe region. On the stoss slope, streamline compression and ?ow acceleration cause an increase in ?ow steadiness and shear stress to a maximum at the crest that is double that at the toe of the isolated dune and 60–70 per cent greater than at ?ow reattachment on the lower stoss of closely spaced dunes. Streamwise ?ow accelerations, rather than turbulence, have greater in?uence on stress generation on the stoss and this effect increases with stoss slope distance and with incident wind speed. Reversed ?ow within the separation cell generates signi?cant surface shear (30–40 per cent of maximum values) for both spacings. This supports ?eld studies that suggest reversed ?ow is competent enough to return sediment to the dune directly or in a de?ected direction. High variability in shear at reattachment indicates impact of a turbulent shear layer that, despite low values of time‐averaged streamwise stress in this region, would inhibit sediment accumulation. Downwind of reattachment, shear stress and ?ow steadiness increase within 6 h (h = dune height) of reattachment and approach upwind values by 25 h. A distance of at least 30 h is suggested for full boundary layer recovery, which is comparable to ?uvial estimates. The Irwin sensor used in this study provides a reliable means to measure skin friction force responsible for sand transport and its robust, simple, and cost‐effective design shows promise for validating these ?ndings in natural dune settings. Copyright © 2003 John Wiley & Sons, Ltd.     

基于灵敏度分析的结构损伤识别中的传感器优化配置

本文提出了结构损伤识别中的传感器测点优化配置的方法。该方法是通过仅考虑结构刚度变化的结构特征灵敏度分析，以结构各自由度的损伤信息为条件，计算出结构的Fisher信息阵，并且考虑到Fisher信息阵的逆阵可能不存在，而将Fisher信息阵对应于每个自由度进行分解，通过计算每个分解的Fisher信息阵的迹而确定每个自由度含有的损伤信息的多少，从而从结构的全部自由度中去掉那些含损伤信息少的自由度。建立直接利用结构不完整的实测模态来定位结构的损伤，避免结构模态扩阶带来不必要的误差。最后，通过数值算例表明，该方法能有效地识别出结构的损伤。     

光栅Bragg地震检波器的传感特性研究(英文)

针对目前石油地震勘探的瓶颈—检波器性能差的问题,设计了一种新型光纤Bragg光栅（FBG）地震检波器,阐述了其工作原理,并从理论上给出了检波器的响应函数等参数。由于FBG的传感优势,这种新型地震检波器动态范围可达94dB,灵敏度高,重量轻,造价低,是理想的新一代地震勘探信号采集单元。     

基于光纤光栅的高精度测温传感器研究

利用光纤光栅对温度和应变同时敏感的特性,我们设计制作了一款满足地震前兆观测中地温观测精度要求的双金属光纤光栅温度传感器,并首次对温度增敏后的光纤光栅传感器样品进行了精度分析,得到该传感器的精度达到士0.05℃,获得了现今光纤光栅温度传感器最高的分辨率0.0014℃/pm.该传感器的成功研制从实验上证明了光纤光栅用于地震前兆观测的可行性,为地震前兆观测的光学化打下了坚实的基础.