A temporally second-order accurate Godunov-type scheme for solving the extended Boussinesq equations

A numerical scheme for solving the class of extended Boussinesq equations is presented. Unlike previous schemes, where the governing equations are integrated through time using a fourth-order method, a second-order Godunov-type scheme is used thus saving storage and computational resources. The spatial derivatives are discretised using a combination of finite-volume and finite-difference methods. A fourth-order MUSCL reconstruction technique is used to compute the values at the cell interfaces for use in the local Riemann problems, whilst the bed source and dispersion terms are discretised using centred finite-differences of up to fourth-order accuracy. Numerical results show that the class of extended Boussinesq equations can be accurately solved without the need for a fourth-order time discretisation, thus improving the computational speed of Boussinesq-type numerical models. The numerical scheme has been applied to model a number of standard test cases for the extended Boussinesq equations and comparisons made to physical wave flume experiments.     

Design of ship's bow form by potential-based panel method

A surface panel method treating a boundary-value problem of the Dirichlet type with the free surface is presented to design a three-dimensional body corresponding to a prescribed pressure distribution. The free surface boundary condition is linearized with respect to the oncoming flow, and computed by four-point finite difference scheme. Sample designs for submerged spheroids and Wigley hull are carried out to demonstrate the stable convergence, the effectiveness and the robustness of the method. The design of a 5500TEU container carrier is performed with respect to reduction of the wave resistance. To reduce the wave resistance, calculated pressure on the hull surface is modified to have the lower fluctuation, and is applied as a Dirichlet type dynamic boundary condition on the hull surface. The designed hull form is verified to have the lower wave resistance than the initial one not only by computation but also by experiment.     

Stochastic bivariate time series models of waves in the North Sea and their application in simulation-based design

In this paper, we present and evaluate three long-term wave models for application in simulation-based design of ships and marine structures. Designers and researchers often rely on historical weather data as a source for ocean area characteristics based on hindcast datasets or in-situ measurements. The limited access and size of historical datasets reduces repeatability of simulations and analyses, making it difficult to assess the sampling variability of performance and loads on marine vessels and structures. Markov, VAR and VARMA wave models, producing independent long-term time series of significant wave height (H_s) and spectral peak period (T_p), is presented as possible solutions to this problem. The models are tested and compared by addressing how the models affect interpretation of design concepts and the ability to replicate statistical and physical characteristics of the wave process. Our results show that the VAR and VARMA models perform sufficiently in describing design performance, but does not capture the physical process fully. The Markov model is found to perform worst of the tested models in the applied tests, especially for measures covering several consecutive sea states.     

Reliability analysis of soil nail internal limit states using default FHWA load and resistance models

Abstract

Reliability analyses of nail pullout, nail-in-tension, and system reliability of internal limit states are presented for both permanent and temporary soil nails that are designed using default Federal Highway Administration nail load and resistance models within traditional deterministic allowable stress design (ASD) framework. The model uncertainty, correlations between soil strength parameters, between model factor, and nominal load term, and between the two internal limit states, and influence of model factor fittings are all addressed in the analyses. This study provides a general idea of the reliability that is implicitly embedded in current ASD-based soil nail internal limit state designs.     

渤海地区平台结构设计环境条件选取分析

随着平台的使用年限增长,环境条件随着海洋环境的变化而变得日益恶劣,对于渤海地区,提出了是否采用100年一遇环境条件替换50年一遇环境条件进行结构设计.经过对渤海地区的部分中心平台和井口平台50年/100年环境条件对比分析,提出了对于渤海地区海上平台结构采用100年一遇环境条件替换50年一遇环境条件.     

Introducing a transferable fishing day management regime for Pacific Island countries

On 1 December 2007, eight ‘Small Island Developing States’ in the Western and Central Pacific Ocean implemented a management regime restricting the total number of days fished by tuna purse seine vessels within their waters, commonly referred to as the Vessel Day Scheme (VDS). The VDS is seen as one component of management arrangements to reduce fishing mortality on bigeye and yellowfin tuna, constrain fishing effort, and increase the rate of return from access fees by Distant Water Fishing Nations.     

水下多路液压快速接头的夹头结构分析与优化

深海油气田水下生产系统装备之间的精准连接是国际公认的技术难题,对接一般通过深海连接器完成。弹性夹头是水下连接器的重要组成部分,其性能关系到海洋油气生产系统的安全性和可靠性。弹性夹头的主要作用是在水下机器人的辅助下连接和锁紧连接器的固定端和移动端。采用ABAQUS软件的显式动力学分析模块计算夹头夹紧心轴这一过程中的应力、反作用力状态。三维模型仿真结果表明,锁紧过程中弹性夹头的最大应力不超过430 MPa,小于所选取的材料屈服强度480 MPa。采用正交试验和方差分析的方法研究夹头的长度、夹头与心轴的间隙等几个关键尺寸从而分析影响夹头应力和连接所需推力的最显著因素。对夹头的结构进行优化设计,同时也为夹头心轴结构的设计提供了理论依据。最后,通过试验研究对样机进行测试,测试结果表明,夹紧动作所需的最大推力在700 N以下。     

基于遗传算法的浮式防波结构物形状最优化设计

采用遗传算法作为优化手段,以透射系数为目标函数,对给定横剖面面积的浮式防波结构物在规则波中的消波性能及剖面形状进行了最优化计算研究,探讨了透射系数最小的剖面形状与波浪周期之间的关系,为浮式防波结构物的设计提供了一定的理论依据     

Multi-variable adaptive back-stepping control of submersibles using SDU decomposition

A multi-variable adaptive autopilot for the dive-plane control of submarines is designed. The vehicle is equipped with bow and stern hydroplanes for maneuvering. It is assumed that the system parameters are not known, and the disturbance force is acting on the vehicle. Based on a back-stepping design approach, an adaptive control law is derived for the trajectory control of the depth and the pitch angle. To prevent singularity in the control law, the SDU decomposition of the high-frequency gain matrix is used for the design. In the closed-loop system, asymptotic tracking of the reference depth and pitch angle trajectories is accomplished. Simulation results are presented which show that the submarine performs dive-plane maneuvers in spite of the uncertainties in the system parameters and disturbance forces.     

Impacts of maintenance channel dredging in a northern Adriatic coastal lagoon. I: Effects on sediment properties,contamination and toxicity

Conservation and management of coastal lagoons envisage direct human intervention. To prevent siltation and to preserve the hydrodynamics features of the lagoon system, the inner channels undergo regular maintenance dredging.