场地的地震效应及砂土地基的液化

论述了场地地震效应的表现形式，影响砂土液化的主要因素和砂土液化危害的主要特点。     

Simulation Experiments of Land Surface Physical Processes and Ecological Effect over Different Underlying Surface

Based on the existing Land Surface Physical Process Models(Deardorff, Dickinson, LIU, Noilhan, Seller, ZHAO), a Comprehensive Land Surface Physical Process Model (CLSPPM) is developed by considering the different physical processes of the earth‘s surface-vegetation-atmosphere system more completely. Compared with SiB and BATS, which are famous for their detailed parameterizations of physical variables, this simplified model is more convenient and saves much more computation time. Though simple, the feas...     

贵州百花湖分层晚期有机质降解过程与溶解N2O循环

百花湖是一个具有季节性分层的富营养小型湖泊,在秋季湖水倒转期经常发生水质恶化事件,碳氮循环出现异常。文章研究特选择在秋初,湖泊分层开始消失时,测定了湖水中不同深度的N₂O,CH₄,CO₂,有机和无机碳同位素以及其他化学参数变化。结果发现:采样时百花湖在约6m和16m深度附近出现了两个温度不连续层(SDL和PDL),并影响到有机颗粒的沉降和分解。相对而言,有较多的有机质在这两个层内发生降解,但降解的途径有所不同,上部主要是有氧降解,下部则主要是无氧降解过程。N₂O的产生和消耗与有机质的降解过程完全对应:PDL层以上,ΔN₂O与AOU的线性关系反映了N₂O主要形成于硝化作用;PDL层以下反硝化作用导致N₂O严重不饱和;PDL内位于硝化作用和反硝化作用过渡带的N₂O峰,显然是硝化与反硝化联合作用的结果。PDL层内较大的CH₄浓度变化梯度,说明嗜甲烷细菌可能通过氧化NH+4贡献了部分N₂O。百花湖秋、冬季表层湖水N₂O都是过饱和的,都是大气N₂O的源,依据分子扩散模型计算湖泊N₂O的释放通量在12～14μmol/m·day之间,秋、冬季没有明显的差别。秋季底层湖水的反硝化作用是湖泊N₂O的汇,其消耗通量与表层的释放通量基本相当。     

高密度电阻率法在探测煤层露头中的应用

新 疆 含 煤 地 层 具 有 地 层 倾 角 大 、煤 层 厚 度 较 大 、上 覆 第 四 系 厚 度 薄 等 特 点 ,适 宜 用 高 密 度 电 阻 率 法 追 踪 煤层 露 头 。新 疆 煤 田 地 质 局 物 测 队 使 用 复 合 对 称 四 极 剖 面 法 、联 合 剖 面 法 和 中 间 梯 度 法 等 方 法 ,在 拜 城 县 梅 斯 布 拉 克矿 区 探 测 煤 层 露 头 的 隐 伏 位 置 ,收 到 了 很 好 的 效 果 。     

Similarities between strike-slip faults at different scales and a simple age determining method for active faults

Abstract Several differently scaled strike‐slip faults were examined. The faults shared many geometric features, such as secondary fractures and linkage structures (damage zones). Differences in fault style were not related to specific scale ranges. However, it was recognized that differences in style may occur in different tectonic settings (e.g. dilational/contractional relays or wall/linkage/tip zones), different locations along the master fault or different fault evolution stages. Fractal dimensions were compared for two faults (Gozo and San Andreas), which supports the idea of self‐similarity. Fractal dimensions for traces of faults and fractures of damage zones were higher (D ～1.35) than for the main fault traces (D ～1.005) because of increased complexity due to secondary faults and fractures. Based on the statistical analysis of another fault evolution study, single event movements in earthquake faults typically have a maximum earthquake slip : rupture length ratio of approximately 10^?4, although this has only been established for large earthquake faults because of limited data. Most geological faults have a much higher maximum cumulative displacement : fault length ratio; that is, approximately 10^?2 to 10^?1 (e.g. Gozo, ～10^?2; San Andreas, ～10^?1). The final cumulative displacement on a fault is produced by accumulation of slip along ruptures. Hence, using the available information from earthquake faults, such as earthquake slip, recurrence interval, maximum cumulative displacement and fault length, the approximate age of active faults can be estimated. The lower limit of estimated active fault age is expressed with maximum cumulative displacement, earthquake slip and recurrence interval as T ? (d_max /u) · I(M).     

Ar/Ar ages of tephras intercalated in astronomically tuned Neogene sedimentary sequences in the eastern Mediterranean

We present new ⁴⁰Ar/³⁹Ar data for sanidine and biotite derived from volcanic ash layers that are intercalated in Pliocene and late Miocene astronomically dated sequences in the Mediterranean with the aim to solve existing inconsistencies in the intercalibration between the two independent absolute dating methods. ⁴⁰Ar/³⁹Ar sanidine ages are systematically younger by 0.7-2.3% than the astronomical ages for the same ash layers. The significance of the discrepancy disappears except for the upper Ptolemais ashes, which reveal the largest difference, if an improved full error propagation method is applied to calculate the absolute error in the ⁴⁰Ar/³⁹Ar ages. The total variance is dominated by that of the activity of the decay of ⁴⁰K to ⁴⁰Ar (∼70%) and that the amount of radiogenic ⁴⁰Ar_p in the primary standard GA1550 biotite (∼15%). If the ⁴⁰Ar/³⁹Ar ages are calculated relative to an astronomically dated standard, the influence of these parameters is greatly reduced, resulting in a more reliable age and in a significant reduction of the error in ⁴⁰Ar/³⁹Ar dating.Astronomically calibrated ages for Taylor Creek Rhyolite (TCR) and Fish Canyon Tuff (FCT) sanidine are 28.53±0.02 and 28.21±0.04 Ma (±1 S.E.), respectively, if we start from the more reliable results of the Cretan A1 ash layer. The most likely explanation for the large discrepancy found for the younger Ptolemais ash layers (equivalent to FCT of 28.61 Ma) is an error in the tuning of this part of the sequence.     

Research on the effect estimation of seismic safety evaluation

IntroductionItisdefinitelystipulatedintheLawofthePeople'sRepublicofChinaonProtectingagainstandMitigatingEarthquakeDisastersthattheseismicsafetyevaluationmustbemadeformajorprojects(includinglifelineprojects)and,accordingtotheresultsobtained,theseismicresistancerequirementsshouldbedetermined.Thenecessityofseismicsafetyevaluationhasbeenrecog-nizedgradually,butthetopicontheeffectofsafetyevaluationhasnotbeenreferredmuch.Gener-allyspeaking,althoughmostpeopleapprovethesocialeffectofsafetyevaluatio…     

Seismic tests on reinforced concrete and steel frames retrofitted with dissipative braces

Seismic tests have been conducted on two 3‐storey structures protected with pressurized fluid‐viscous spring damper devices. One of the structures was a reinforced concrete frame with clay elements in the slabs, while the other one was a steel frame with steel/concrete composite slabs. The spring dampers were installed through K bracing in between the floors. The tests were performed by means of the pseudodynamic method, which allowed the use of large and full‐size specimens, and by implementing a specific compensation strategy for the strain‐rate effect at the devices. The test results allowed the verification of the adequacy of the attachment system as well as the comparison of the behaviour of the unprotected buildings with several protected configurations, showing the benefits of the application of the devices and the characteristics of their performance. The response of the protected structures was always safer than that of the unprotected ones mainly due to a significant increase of equivalent damping. The increase in the damping ratio depends on the level of deformation. Copyright © 2004 John Wiley & Sons, Ltd.     

几种空气质量预报方法的预报效果对比分析

目前应用于我国各个城市空气质量预报业务的预报方法主要有三种 :数值模式预报、统计预报和综合经验预报。这几种预报方法都有其各自的优势 ,同时也存在一些不足。应用以上方法对天津市市区进行空气质量业务预报 ,通过实测资料与预报结果进行对比分析 ,给出这几种方法在天津市区空气质量预报中的预报效果客观评价。     

非静力中尺度模式的现状及发展趋势

随着高性能计算机与大气探测技术的发展 ,使得非静力中尺度数值预报模式的业务化成为可能 ,世界上主要的气象中心最近几年纷纷发展非静力中尺度模式 ,并取得了重要进展 ,这其中尤以英国气象局新发展的非静力通用模式最为突出。基于此 ,介绍了近年来国际上发达国家的非静力中尺度预报模式的现状及发展方向 ,并对该类模式设计中应注意的一些问题进行了阐述