考虑液-固耦合的大型超高压换流变压器地震响应研究

针对大型超高压换流变压器的地震响应问题,以一超高压±800kV换流变压器为研究对象,考虑其本体中油与箱壁的相互作用建立三维有限元分析模型,采用LS-DYNA分析换流变压器的自振特性、地震作用下的动力响应规律以及换流变压器的薄弱部位。研究结果显示,对于大型超高压换流变压器,本体中油与箱壁的相互作用对结构动力响应有一定的放大作用,进行自振特性和地震响应分析时应考虑;套管体系的薄弱部位为套管的底部和中间部位,在这两个位置拉应力和压应力最大值交替出现;换流变套管体系在地震作用下的位移较大,套管顶部的导线应设置足够大的伸缩距离。     

高烈度区大跨刚构-连续梁桥地震响应分析

为研究大跨刚构-连续梁桥在高烈度地区的地震响应,选取羊记沟左线大桥为工程背景,利用Midas软件建立多个有限元模型,考虑纵、横桥向的水平地震波输入,比较反应谱与时程分析结果,获得结构动力响应特点,为大跨刚构-连续梁桥的抗震设计提供参考依据。结果表明:刚构-连续体系仅单墩刚构时不宜采用反应谱分析,高烈度地区桥梁进行地震响应时程分析时,选用与场地适应的地震波的同时,应考虑采用本地地震参数转化人工波作为地震激励源。桥墩不等高时,可通过改变墩截面形状及其与主梁连接方式调节内力分布,避免矮墩刚度大导致的内力集中。     

不滑移状态下深埋圆形隧道地震响应研究

地下结构的地震响应主要取决于由地震波传播产生的土体变形与土结相互作用。剪切波传播过程中将会引起隧道衬砌的椭圆化变形,进而降低衬砌有效承载力。剪切波作用下的深埋圆形隧道可认为处于均质的纯剪状态,基于相对刚度法的拟静力解析解可充分考虑土结相互作用对隧道结构内力的影响。基于此,本文将通过有限元数值分析获得的自由场地地基变形引入不滑移状态下深埋圆形隧道内力求解公式,并结合二维和三维数值模拟途径,将动力分析结果与解析解结果进行对比分析,以评价各种解析方法的适用性和数值途径的可靠性。     

天津地区土动力学参数变异性对地表地震动参数的影响

收集天津地区十多年来的83份地震安全性评价报告,统计202个钻孔的1 650组动三轴数据,分别给出不同种类土在不同区间深度下的统计代表值及其标准差。以某典型Ⅲ类场地为例,用等效线性化方法进行多种地震动强度及相位输入下的水平成层场地地震反应分析计算,详细研究该地区覆盖土层动剪模量比和阻尼比变异性对地表峰值加速度及其反应谱的影响。结果表明:场地地表峰值加速度和反应谱随土动剪切模量比增大或减小而增大或减小,随土动阻尼比增大或减小而减小或增大;在大震输入条件下,地表峰值加速度和地表反应谱的中、高频段随土动剪切模量比减小而减小的变化尤为明显,动阻尼比变化也有一定影响,但不如土动剪切模量比减小变化时影响明显;在中震、小震地震动输入条件下,场地土的动剪模量比和阻尼比变异性对地表峰值加速度和反应谱影响并不显著。     

北方农牧交错区干旱特征变化及其对植被总初级生产力的影响

北方农牧交错区地处半湿润/半干旱生态脆弱过渡带,干旱是影响该区植被生产力的关键因素之一。探究干旱对植被总初级生产力的影响,对深刻理解气候变化下生态系统生产力变化响应特征及优化区域碳水循环具有重要意义。为了更好地了解水分限制区不同干旱特征对GPP影响,本研究以北方农牧交错区为例,基于长时间序列的标准化降水蒸散发指数(SPEI3,1900—2020年)和植被总初级生产力(GPP,1982—2018年)等数据,首先采用小波分析明确SPEI3与GPP强相关周期,在此基础上利用游程理论识别干旱特征,进而分析了北方农牧交错区干旱特征与GPP的变化趋势,最后厘定了不同干旱特征对GPP的影响。结果表明:(1) 1982—2018年北方农牧交错区SPEI3与GPP在半年周期和年周期存在显著相关关系,滞后效应随时间变化而变化;年际分析能够减弱滞后效应对SPEI3与GPP相关性的影响;(2) 1900—2020年北方农牧交错区干旱历时、干旱烈度和烈度峰值均呈现显著增加趋势,干旱烈度随着干旱历时和烈度峰值的增加而加剧,干旱特征高值区往往具有更强的增加趋势;(3) 1982—2018年北方农牧交错区GPP总体呈...     

Evaluation of ASCE 7 equations for designing acceleration‐sensitive nonstructural components using data from instrumented buildings

This study uses instrumented buildings and models of code‐based designed buildings to validate the results of previous studies that highlighted the need to revise the ASCE 7 F_p equation for designing nonstructural components (NSCs) through utilizing oversimplified linear and nonlinear models. The evaluation of floor response spectra of a large number of instrumented buildings illustrates that, unlike the ASCE 7 approach, the in‐structure and the component amplification factors are a function of the ratio of NSC period to the supporting building modal periods, the ground motion intensity, and the NSC location. It is also shown that the recorded ground motions at the base of instrumented buildings in most cases are significantly lower than design earthquake (DE) ground motions. Because ASCE 7 is meant to provide demands at a DE level, for a more reliable evaluation of the F_p equation, 2 representative archetype buildings are designed based on the ASCE 7‐16 seismic provisions and exposed to various ground motion intensity levels (including those consistent with the ones experienced by instrumented buildings and the DE). Simulation results of the archetype buildings, consistent with previous numerical studies, illustrate the tendency of the ASCE 7 in‐structure amplification factor, [1 + 2(z/h)] , to significantly overestimate demands at all floor levels and the ASCE 7 limit of to in many cases underestimate the calculated NSC amplification factors. Furthermore, the product of these 2 amplification factors (that represents the normalized peak NSC acceleration) in some cases exceeds the ASCE 7 equation by a factor up to 1.50.     

Modeling spatially correlated spectral accelerations at multiple periods using principal component analysis and geostatistics

Regional seismic risk assessments and quantification of portfolio losses often require simulation of spatially distributed ground motions at multiple intensity measures. For a given earthquake, distributed ground motions are characterized by spatial correlation and correlation between different intensity measures, known as cross‐correlation. This study proposes a new spatial cross‐correlation model for within‐event spectral acceleration residuals that uses a combination of principal component analysis (PCA) and geostatistics. Records from 45 earthquakes are used to investigate earthquake‐to‐earthquake trends in application of PCA to spectral acceleration residuals. Based on the findings, PCA is used to determine coefficients that linearly transform cross‐correlated residuals to independent principal components. Nested semivariogram models are then fit to empirical semivariograms to quantify the spatial correlation of principal components. The resultant PCA spatial cross‐correlation model is shown to be accurate and computationally efficient. A step‐by‐step procedure and an example are presented to illustrate the use of the predictive model for rapid simulation of spatially cross‐correlated spectral accelerations at multiple periods.     

Gully head modelling: A Mediterranean badland case study

Predicting the location of gully heads in various environments is an important step towards predicting gully erosion rates. So far, field data collection and modelling of topographic thresholds for gully head development has mainly focused on gullies that formed in forested areas, rangelands, pastures and cropland. Such information for gullies in badlands however is very scarce. Therefore, this paper aims to extend the database on gully head topographical thresholds through data collection in a badland area and to improve the prediction of gully heads forming at sites with a very low erosion resistance value. For this, we chose a badland site located in central Italy that is characterized by biancana forms and both active and dormant gullies. The definition of the conditions under which present‐day gully heads developed allowed a better modelling of the gully head threshold equation, with modification of a previous model and the exemplification of how to use the updated model. The model shows that the resistance to gully head retreat depends on slope gradient and drainage area at gully heads, land use at the moment of gully development (as numerically expressed using parameters derived from the Runoff Curve Number method), surface rock fragment cover, presence of joints, pipes, and factors/processes affecting detachment rate. This study attempted to better understand environmental conditions that control the development of gully heads in badlands through a combination of field data collection of gully heads, an analysis of land use changes over 10 centuries, focusing on the period 1820–2005, and land use management through repeat photography and a critical examination of historical documents. © 2018 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

考虑时间约束的地震救灾数学模型设计与实现

在地震救灾方面,针对信息实时更新的地震救灾数学模型,为了满足不同受灾点的物资需求,增加了出救点数量以及配送时间,以此来保证地震救援物资需求的满足度,提高了应急响应水平。结合地震救灾特点,设计了一种考虑时间约束的地震救灾数学模型。该模型在地震救灾物资需求预测部分,分析影响地震救灾物资需求量的主要因素,构建地震救灾物资需求量计算模型,对影响地震救灾物资需求量的主要因素构建隶属度函数,给出基于模糊综合评判的地震救灾物资需求分级模型。其次,考虑时间约束以及需求不确定等方面,构建考虑时间约束的地震救灾多目标优化数学模型,并给出求解模型。实验结果表明,该模型减少了救灾物资到达受灾点的延迟时间,可在满足时间约束的条件下提高物资需求满足率。     

黄土高填方场地地震动参数特性分析

削山造地后形成的黄土高填方场地对地震动参数特性影响较大。以实际工程项目为研究对象,构造不同填土高度的计算剖面,采用一维等效线性化方法计算土层地震动参数,分析基岩地震动输入参数和填土高度对场地地表放大效应的影响。研究表明:场地地震放大系数随填土层的高度增加呈递减趋势。在多遇地震动和基本地震动作用下,场地地震放大系数递减速度比罕遇地震动和极罕遇地震动作用下要大。当填土高度达到一定程度后放大效应趋于平稳;填土高度的变化,会改变地表加速度反应谱的形状。填土高度越大,地表反应谱长周期的频谱成分越显著,反应谱曲线向后移,反应谱峰值点均明显向长周期移动,并出现多个峰值点,反应谱特征周期值变大;下伏基岩的刚度越大,地表峰值加速度的放大效应越大。地表加速度反应谱特征值相比变小。当填土高度增大到一定程度时,下伏基岩的种类对地表地震动特性影响则不明显。该研究成果对高填方场地的地震安全评价和结构抗震设计提供参考。